Instructions / Assembly

USSHOVEL.COM
Hello,
We thank you for selecting your DARE INNOVATIVE
TOOLS' Shovel. Assembly is minimal and can be
easily done by following the few simple steps below:
Components List:
1. HandGrip
2. Adjustable Handle
3. Blade
4. Assembly screws already attached to components
for easy connection.
Assembly:
1. How to attach your Handgrip to the Handle.
a) Loosen the screws attached to your
handgrip with a phillips-head screwdriver.
b) Completely insert your handle into the open
end of your handgrip.
c) Securely retighten the screw/s loosened in
step (a.)
2. How to attach your just assembled (Handgrip and
Handle) to the Blade.
a) Loosen the screws attached to the blade.
b) Locate and select Height-Marking that best
matches your height.
c) Position the end of the handle to the desire
Height Marking.
d) Securely retighten the screws loosened in
step (a.)
e) See instruction label on the blade for
additional information.
Maintenance:
1. Check all fasteners at frequent intervals for proper
tightness to be sure the shovel is in safe working
conditions.
2. Do not use shovel if any component becomes
damaged.
Shoveling:
Like no other shovel your Crack Jumper allows
you to work properly and safely.
1. Push the snow, mulch, etc...rather than lifting.
a) The handgrip's force-alignment shape
allows you to maintain an upright neutral
spine reducing or eliminating lower back
pain.
b) The handgrip accommodates both hands
for greater control leading to less physical
exertion.
c) The Crack Jumper blade allows to you
push with less concern for uneven
walks and drives as it rides over these
obstacles.
2. If you lift...
a) DO NOT TWIST YOUR BODY; Throw the
snow or mulch forward.
b) Lift with your legs, not your back.
Contact Info:
For assistance or comments please feel free to
reach us at -
https://www.usshovel.com/contacts