User manual

- 8 -
Manual Setting modes
For basic settings, the following menu is started by press MENU key.
The basic settings can now be performed in the following successive order:
Note: Keeping the UP/+ or DOWN/- key depressed when setting certain units in the manual setting mode will
increase/decrease digits in greater steps.
The setting procedure can be exited at any time by either pressing the HISTORY key or waiting for the 30-second
time-out to take effect.
Time
- Press the MENU key to select the TIME section, TIME section digits will start flashing. Enter LCD
contrast setting mode (level 1-8, default level 5), press the UP/+ or DOWN/- key to set the value.
- Press the ENTER key to select the following modes, press the UP/+ or DOWN/- key to set the value.
:
 Time zone
Note: At Europe, 0 for GMT+1 time zone, 1 for GMT+2 time zone, -1 for GMT time zone.
At America, -4 for Atlantic time zone, -5 for Eastern Time zone, -6 for Central Time Zone, -7
for Mountain Time zone, -8 for Pacific time zone, -9 for Alaska time zone, -10 for Hawaii time
zone.
 12/24h time display select (default 12 hours)
 DST ON/OFF (this function is only available for WWVB version, while for DCF version this
feature is not activated)
 Manual time setting (hours/minutes)
Note: Press ON/OFF key to set the DST ON/OFF. “DST OFF” indicates that the feature is off and the
internal real time clock will not change times automatically. “DST ON” indicates that the feature is on
and the internal real time clock will change times according to the DST time schedule automatically.
Some locations (Arizona and parts of Indiana) do not follow Daylight Saving Time, and should select
“DST OFF”.
Date
- Press the MENU key twice to select the DATE section, DATE section digits will start flashing. Press
the UP/+ or DOWN/- key to shift the display of DD-MM-YY, DD-MM-WEEK and Time alarm display
(Default DD-MM-YY format),
- Press the ENTER key to select the following modes, press the UP/+ or DOWN/- key to select the format
or set the value:
 Select DD-MM or MM-DD format. (Default DD-MM format)
 Calendar setting (year/month/date)
 Time alarm setting. (Hours/minutes). Press the ON/OFF key to on/off the alarm. If alarm is
enabled, an alarm symbol appears in the display indicating the alarm function has been
enabled.
Note: When a set weather alarm condition has been triggered that particular alarm will sound for 120
seconds. The corresponding value, ‘HI AL” or “LO AL” and the alarm symbol are flashing until the
weather condition doesn’t meet the user set level. Press any key to mute the alarm.