Linker Kit Platine mit 2 Druckköpfen Introduction Linker Double Buttons Module has two push button switches. Features Dimensions: 24.8×20.9×10.
Schematics Schematics Application Ideas test /************************************************************************* > File Name: Linker_buttonv2.
************************************************************************/ #include "Arduino.h" const int s1_pin = 3; const int s2_pin = 2; void setup(){ pinMode (s1_pin, INPUT); pinMode (s2_pin, INPUT); Serial.begin (9600); } void loop (){ if(digitalRead (s1_pin)){ Serial.println ("buttom_1 have been hold down!"); } delay (50); if(digitalRead (s2_pin)){ Serial.
