Instructions / Assembly

From the floor, add 1 3/4” to the height of the door being installed,
to determine the center height of the rail.
Ex: Door 84”
+ 1 3/4” = 85 3/4” center of the rail from the floor.
CAUTION if the rail is not installed level, the door may slide open
or closed without warning.
Mark the location for each lag screw.
LexingtonQueen’s
IMPORTANT - PLEASE READ ALL INSTRUCTIONS BEFORE YOU BEGIN INSTALLATION.
• These instructions are for a single door installation.
• Identify secure points on the wall to attach the rail before starting your installation.
• It is necessary that all the lag screws used to install the rail are secured to the wall stud (2 x 3 structure).
• Use a wood plank secured to the wall stud if you are unable to fix all lag screws in wall stud.
1/2” & 5/8”
1/2” & 5/8”
7/32”
DOOR HEIGHT
+ 1 3/4”
1.1 1.2
RAIL (1X)
STOPPER
SBSTPR (2X)
+
ANTI-JUMP
BUMPER
SBGDAJ (2x)
DOOR GUIDES
SPACER
+
LAG SCREW KIT
SBKS5 (5x)
DOOR HANGER
(2X)
DRIVE SCREW (x4)
1.1
HOW TO INSTALL YOUR RAIL
LEXINGTON / QUEEN’S - MURAL DOOR SYSTEM
Parts included Recommended tools
1. Mounting the rail
[e-mail]
colonialelegance.com
colonialelegance inc.
[e-mail]
colonialelegance.com
Telephone: [phone]
Toll Free: 800-361-2030
Fax: [phone]
[e-mail]
colonialelegance.com
colonialelegance inc.
3800, Du Tricentenaire, Montreal,
Quebec, Canada H1B 5T8
[e-mail]
colonialelegance.com
colonialelegance inc.
[e-mail]
colonialelegance.com
Telephone: [phone]
Toll Free: 800-361-2030
Fax: [phone]
[e-mail]
colonialelegance.com
colonialelegance inc.
3800, Du Tricentenaire, Montreal,
Quebec, Canada H1B 5T8