Installation Guide

DLR4 4”Recessed LED Downlight
INSTALLATION INSTRUCTIONS
DLR4-27
Risk of Fire or Shock:
not
consult
an electrician.
Risk of Electric Shock:
Disconnect power at fuse of circuit breaker before installing or servicing.
Risk of Fire or Electric Shock:
Install this kit only in the luminaires that has the constructions features and dimensions shown in the
photographs and/or drawings.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
Do not alter, relocate, or remove wiring, lampholders, power supply, or any other electrical component.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
mounting clip system. No tools are necessary for installation.
Carefully unpack the downlight from its packaging. Inspect
product for defects due to shipping.
Disconnect Edison base from downlight and screw into socket
inside recessed housing. (GU24 base option available).
Plug the downlight connector into the Edison (or GU24) base
connector.
Carefully route wires into housing and push the downlight up.
1
2
2
3
3
4
4
NICOR, Inc. | rev 07.09.14
CAUTION:
familiar with complete installation instructions prior to use.
NOTE: