Instructions / Assembly

DESIGNED FOR RING 2 WITH SPECIAL ELECTRONICS TO PROTECT YOUR BELL
The only supply with special electronics to protect and fully power your doorbell.
START HERE
PLEASE UNBOX AND SETUP YOUR RING 2
DOORBELL WITHOUT THE POWER SUPPLY
FIRST.
A. IT IS RECOMMENDED THAT YOU
FULLY CHARGE THE BATTERY
BEFORE SETUP.
B. DOWNLOAD THE RING APP ON
YOUR SMART PHONE AND THEN
FOLLOW SETUP INSTRUCTIONS
AS ENCLOSDED IN THE RING 2
BOX.
ONCE SET UP, PLEASE MAKE SURE
THAT ALL FUNCTIONS OF RING 2
DOORBELL ARE WORKING CORRECTLY
INCLUDING RINGING, NOTIFICATION
AND LIVE VIEW. YOU MAY HAVE TO GO
INTO SETTINGS AND ACTUATE THE
LIVE VIEW SETTING.
THIS TESTING IS TO ENSURE THAT
RING 2 HAS NO FIRMWARE ISSUES AS
PROBLEMS HAVE BEEN REPORTED
WITH FIRMWARE PRIOR TO 1.9.48. YOU
CAN CHECK FIRMWARE BY CLICKING
DEVICE HEALTH. THE POWER SUPPLY
DOES NOT INFLUENCE RING 2
FUNCTIONS IN ANY WAY.
NOW INSTALL THE POWER
SUPPLY
PLEASE DO NOT PLUG THE
TRANSFORMER IN FIRST. PLEASE MAKE
BELL CONNECTIONS FIRST.
CONNECT CONNECTOR CABLE ENDS TO
THE RING 2 TERMINAL POINTS.
.
YOU CAN CONNECT EITHER WIRE TO
EITHER TERMINAL. THEN CONNECT THE
MALE CONNECTOR TO THE FEMALE
CONNECTOR OF THE ADAPTER. NOW
PLUG IN THE TRANSFORMER.
SOCKET  OHMKAT POWER SUPPLY  RING 2
NOTE
THE POWER SUPPLY TRICKLE CHARGES
THE BATTERY, SO OVER THE NEXT FEW
DAYS YOU WILL SEE THE BATTERY
STATUS STEADILY IMPROVE AND IT WILL
THEN BE MAINTAINED AT THAT LEVEL.
THIS IS NOT INSTANTANEOUS.
YOU WILL SEE THE WHITE CIRCLE ON
RING DOORBELL LIGHT UP. IT TAKES
30 SECONDS TO LIGHT UP. YOUR RING
2 DOORBELL IS NOW POWERED.
In a nutshell: THIS IS EASY.
OHMKAT LED HAS 3 STATES.
- OFF
- FULL BRIGHT (FULL POWER STATE)
- DIM (BELL HAS LOCKED ITSELF OR
THERE IS A SHORT ON THE LINE.
DISCONNECT/RESET FOR 2 MINUTES)
PLEASE READ THIS CAREFULLY.
EVERY OHMKAT HAS EXCLUSIVE SELF
TEST CAPABILITY AND SPECIAL
PROTECTIVE ELECTRONICS. OHMKAT IS
ALSO VERY ROBUST AND RARELY FAILS.
IF YOU EXPERIENCE ANY ISSUE ASK US
ABOUT THE SELF TEST CAPABILITY. IT IS
EASY TO TEST AND GIVES YOU
IMMEDIATE PEACE OF MIND ABOUT
OHMKAT HEALTH.
RING 2 IS KNOWN TO PERIODICALLY
LOCK ITSELF AND IT SEEMS THAT
POWER SUPPLY IS THE PROBLEM WHEN
IT IS NOT. THE FIX IS SIMPLE. TAKE THE
RING 2 AND PRESS THE RESET BUTTON
FOR 30 SECONDS. THEN RELEASE AND
SETUP RING 2 AGAIN IN APP. ONCE
SETUP JUST RECONNECT TO OHMKAT.
FOR ANY QUESTIONS WRITE TO US AT:
[e-mail].
IF WE CANNOT RESOLVE YOUR
PROBLEM, WE WILL REPLACE YOUR UNIT
OR GIVE YOU A REFUND.
3
Ring 2
2
3
4
1
5