Manualshelf

Instructions / Assembly

ManualsBrandsUnbranded ManualsDoor Chimes & KitsWhite Wireless Plug-In Door Chime Receiver with Nickel Wireless Door Bell Push Button
12
HOMEDEPOT.COM
Please contact 1-855-556-1852 for further assistance.
Use and Care
Guide
Wireless Plug-In
Door Chime
ITEM #1001 406 903
MODEL #216591
Installation
1
ACTIVATING THE PUSH BUTTON
BATTERY
□ Remove the front cover of the push
button (sold separately) by inserting
a flat head screwdriver in the slot on
the bottom of the button and pulling
up slightly.
□ Remove the plastic tab from the
battery compartment to allow
connection to the terminal.
□ Snap the front cover onto the base by
first hooking the tops together, then
snapping the base on.
2
PLUGGING IN THE CHIME
□ Plug the door chime into any outlet
in the house, ensuring it is within
the transmission range of the push
button location.
3
SYNCING THE CHIME AND PUSH
BUTTON
□ Press and release the learning button
on the chime.
□ Immediately following, press and
release the push button to hear a
2-note tune. Press and release the
push button again within 5 seconds
to hear another tune. Continue
pressing and releasing the push
button until you reach the desired
tune. To set that tune, do not push the
push button for five seconds.
□ Follow above steps for second push
button if applicable.
4
MOUNTING THE PUSH BUTTON
□ Remove the front cover from the base by following step 1.
□ Mount the push button base to a clean wall or door jamb
with included screws or mounting tape. If mounting with
screws, predrill a pilot hole through the push button base in
the desired location using a 5/64 in. drill bit.
□ Snap the push button cover onto the base by first hooking
the tops together, then snapping the base on.
216591Inst.ai
Learning
mode
button
5
RESYNCING THE CHIME AND PUSH BUTTON
This step is optional only if restarting and resyncing the chime
is needed.
□ Press and hold the learning mode button on the chime until
you hear a ding sound. The chime is now reset and ready to
be resynced.
□ Follow step 3 to sync the chime and push button.
216591Inst.ai
Learning
mode
button
TOOLS REQUIRED
216595Inst.ai
Phillips screwdriver Flat Head Screwdriver Wireless Push Button Drill 5/64 in. Drill Bit
216591Inst.ai
Learning
mode
button
216591Inst.ai
Learning
mode
button
216591Inst.ai
Learning
mode
button

Summary of content (2 pages)