Model RT2000 QUICK REFERENCE CARD TDM-200 TDM-250 TDM-100 TDM-150 THIS AREA FOR SERVICE PROVIDER CONTACT INFORMATION: TDN 07102-00049
MANAGEMENT FUNCTIONS ACCESS INSTRUCTIONS 1. AT ATM WELCOME SCREEN, PRESS AND HOLD DOWN KEY (LOWER-RIGHT CORNER OF KEYPAD), PRESS <1> KEY, THEN RELEASE BOTH KEYS. THE TOP MENU WILL BE DISPLAYED. 2. AT THE TOP MENU, SELECT MANAGEMENT FUNCTIONS OPTION. ENTER PASSWORD TO ACCESS MANAGEMENT FUNCTIONS MENU. RESETTING ERRORS RESET ATM RESET ERROR RESET ATM: FOLLOW ACCESS INSTRUCTIONS TO ENTER MANAGEMENT FUNCTIONS. SELECT SYSTEM PARAMETERS, THEN RESTART THE TERMINAL.
CASSETTE / DAY CLOSE CASSETTE CLOSE 1. GO TO MANAGEMENT FUNCTIONS USING ACCESS INSTRUCTIONS. SELECT TERMINAL CLOSE FUNCTIONS. CHOOSE CASSETTE CLOSE OPTION. ENSURE SELECT CASSETTE(S) ARE CHECKED ( ). SELECT ENTER TO CLEAR THE TOTALS. SELECT PRINT OPTION TO PRINT A RECEIPT. 2. CASSETTES WILL UNLOCK AND REPLENISH CASSETTES PROMPT APPEARS. REMOVE ALL CASSETTES. COUNT CASH. CASH IN CASSETTES (INCLUDING REJECT CASSETTE) SHOULD EQUAL REMAINING AMOUNT VALUE ON RECEIPT. 3.
REPLACING RECEIPT PRINTER PAPER STEP ACTION STEP ACTION STEP ACTION 1 CUT REMAINING PAPER TO ALLOW REMOVAL. 2 PRESS FEED BUTTON TO CLEAR PAPER FROM PAPER PATH. 3 LIFT SPINDLE TO REMOVE PAPER ROLL AND SPINDLE. 4 REMOVE OLD PAPER ROLL. PLACE SPINDLE IN NEW PAPER ROLL. 5 PLACE NEW PAPER ROLL ON BRACKET. MAKE SURE PAPER FEEDS FROM BOTTOM! 6 FEED END OF PAPER INTO FEED SLOT. 7 PAPER WILL FEED AUTOMATICALLY INTO PRINTER. 8 (OPERATOR SERVICE PANEL PRINTING) GRASP HANDLE AND PULL RELEASE PIN.
REPLENISHING CASSETTE(S) STEP ACTION STEP ACTION 1 UNLOCK/OPEN CABINET. THE DISPENSER IS MOUNTED TO A SLIDING SHELF. 5 REMOVE REJECT CASSETTE BY PULLING FROM DISPENSER. PLACE CASSETTE ON FLAT SURFACE. 2 REMOVE NOTE CASSETTE(S) BY GRASPING GREEN HANDLE AND PULL FROM DISPENSER. PLACE CASSETTE(S) ON FLAT SURFACE. 6 UNLOCK REJECT CASSETTE WITH SUPPLIED KEY. OPEN LID. REMOVE ANY NOTES. DO NOT RECYCLE REJECTED NOTES! CLOSE, LOCK AND INSERT REJECT CASSETTE BACK IN DISPENSER..
COMMON ERROR CODES ERROR CODE 101 RECOMMENDED ACTIONS MEANING FEED FAILURE 1. REMOVE AND OPEN CASSETTE. 2. IF THERE IS CURRENCY IN CASSETTE, GO TO STEP 3. If NOT, LOAD CURRENCY. GO TO STEP 4. 3. IS CURRENCY OF GOOD QUALITY? IF YES, GO TO STEP 4. IF NO, OBTAIN GOOD QUALITY CURRENCY. CONTINUE WITH STEP 4. 4. SHUFFLE CURRENCY. REPACK CASSETTE. 5. RELOAD CASSETTE USING REPLENISHING CASSETTE PROCEDURE. 6. RESET ERROR USING RESETTING ERRORS PROCEDURE. IF ERROR CLEARS, GO TO STEP 7.
