User Manual

C-5
APPENDIX C - COMBINATION LOCKS
9. “OPR” = OPEN RIGHT
10. “CC” = CONFIRM COMBINATION
11. “EC2” = ENTER COMBINATION 2
12. “C00” = CLOSE SEAL NUMBER
13. “EOP” = END OPERATION
14. “
!!
!!
!” = (ERROR LIGHTNING BOLT)
15. “AUD” = DISPLAYS WHILE A UDIT DATA IS BEING WRITTEN
16. “?-” = DISPLAYS WHEN # HAS BEEN PRESSED TO ENTER A KEYPAD COMMAND
13. EOP - Power Lock - EC
Turn the dial to the left (CCW) until EC (Enter Combination) is displayed.
14. EC - Enter New Shelved Mode Combination - OPr
Enter the new shelved mode combination by pressing those digits on the lock’s keypad. The numbers will be
displayed on the LCD as they are entered.
15. OPr - Retract Bolt
Turn the dial to the right (CW) to retract the bolt.
16. Close Door
17. Extend Bolt
Turn the dial to the left (CCW) to extend the bolt.
CODE DESCRIPTIONS:
1. “EC” = ENTER COMBINATION
2. “ EC” = (CHANGE) KEY ENTER COMBINATIONS
3. “D-” = DELAY TIME
4. “INI” = DISPLAYS WHILE LOCK IS BEING INITIALIZED
5. “IP1” = INSERT PERSONAL IDENTIFIER 1
6. “IP2” = INSERT PERSONAL IDENTIFIER 2
7. “ISA” = INSERT SUPERVISOR A UDIT KEY
8. “POC” = PULL OUT CHANGE KEY