Quick Reference Guide User Manual

2
MANAGEMENT FUNCTIONS
- Access instRuctions -
1. At AtM WelcoMe scReen, pRess And hold doWn the <ctRl>
key (loWeR-RiGht coRneR of keypAd), pRess <1> key, then ReleAse
both keys. the pAssWoRd Access pRoMpt is displAyed.
2. enteR pAssWoRd And select <enteR>. the MAnAGeMent functions MAIN MENU is displAyed.
TERMINAL CONFIGURATION REPORT
folloW Access instRuctions to enteR MAnAGeMent functions. select
DIAGNOSTICS > TERMINAL STATUS.
CONFIGURATION SUMMARY: this suMMARy is A coMpRehensive
RepoRt of cuRRent teRMinAl confiGuRAtion And hARdWARe stAtus
infoRMAtion.
note: it is hiGhly RecoMMended thAt this RepoRt be pRinted And sAved AfteR initiAl setup And WheneveR
chAnGes ARe MAde to the teRMinAls confiGuRAtion.
RESTART / SHUTDOWN TERMINAL
RESTART TERMINAL: this function Reboots the teRMinAl.
folloW Access instRuctions to enteR MAnAGeMent functions. select
SYSTEM PARAMETERS.
SHUTDOWN TERMINAL: this function poWeRs-doWn the teRMinAls
opeRAtinG systeM. When pRoMpted thAt shutdoWn is coMplete, tuRn
on/off sWitch on poWeR supply to <off> position.