User Manual User guide

32
MODEL RL2000 USER MANUAL
Cut paper between the roll and printer feed path.
This section of the manual covers preventive and corrective maintenance procedures appropriate for user
personnel. The following areas are covered:
1. REPLENISHING RECEIPT PAPER. Describes how to replace a spent receipt paper roll.
2. CLEANING THE ENCLOSURE. The proper way to clean the ATM housing.
3. CARD READER CLEANING. The recommended card reader cleaning technique.
*Important*
Only qualified service personnel are authorized to repair or
service the terminal. Should a malfunction occur, DO NOT at-
tempt to service the unit yourself! Contact your Triton certified
service provider!
NOTE: This operation must be completed with the AC power applied to the ATM.
1. Open the control panel by unlocking the top enclosure and pulling the hinged door forward.
2. If paper remains on the roll, cut or tear the paper between the roll and the printer.
** Caution **
DO NOT pull receipt paper back-
wards through the printer! This
may leave paper fragments that can
cause paper jams.
INTRODUCTION
REPLENISHING THE RECEIPT PAPER