Installation Manual User guide

FT5000 - SITE PREPARATION AND INSTALLATION GUIDE

INTRODUCTION

The Triton FT5000 is a self-serviced, weatherized terminal adaptable for any suitable

exterior wall or vestibule location. The new cabinet design allows flexibility for

“Island” installations (wall thickness up to 6.3") or existing structures (wall thick-

ness up to 10"). Built-in leveling feet and optional platforms (“plinths”) allow the

unit to be raised to the desired height of the wall opening. The following section

provides the physical dimensions and requirements for installing the FT5000 for

your particular site location. To assist you in preparing your site, a check list is

provided of various procedures that should be carried out prior to the arrival of the

ATM

INSTALLATION ACCESSORIES

When installing the FT5000, it is recommended that you or your agent have the

following items available:

» Lifting/moving device

» Wooden/metal safety blocks

to support the ATM during

install

» Framing square

» Hammer

» Water-resistant sealant

(caulk,etc)

» Level

» Tape measure

» Crowbar(s)

» Circular/Jig saws

TSILKCEHCNOITARAPERPETIS

nalproolfangiseddnaetistceleS

temsnoitidnoclatnemnorivneerusnE

seludehcsrodnevdnarotcartnochsilbatsE

stn

emeriuqerenilnoitacinummockcehC

sdeenyrosseccanoitallatsninalP

yrassecenekamdnanalproolfkcehC

snoitaretl

stnemeriuqerlacirtcelellatsnI

sdeennoitacinummocrofetiseraperP

)lanoitpo(gniniartrotareponalP

tsetdnase

nilnoitacinummocllatsnI

elbaliavaeraseirosseccanoitallatsnierusnE

» Tool kit consisting of open/ closed box wrenches, magnetic Phillips/flat

screwdrivers, socket set, pliers, Allen wrench set, etc.