MoCA Security Setup

ManualsBrandsTRENDnet ManualsNetwork EquipmentEthernet Over Coax Adapter (2-Pack)

Proprietary and Confidential

Setup to Access WebUI (Network Security Authentication) 1/2

[Step 1] Connect your MoCA device to

computer/ laptop via RJ45 cable

[Step 2] Setup the IP address of

computer/ laptop to connect the

TMO-311C IP (192.168.144.1)

1. Go to Control Panel > Network

Connections > Ethernet

2. Click Properties

1. Select Internet Protocol Version 4

(TCP/IPv4) then click Properties

1. Select Use the following IP

address and enter the IP address

“192.168.144.1” then click OK

[Note] Please remember to change back the IP address of computer/ laptop once completing settings

Summary of content (5 pages)

PAGE 1
Setup to Access WebUI (Network Security Authentication) 1/2 [Step 1] Connect your MoCA device to computer/ laptop via RJ45 cable [Step 2] Setup the IP address of computer/ laptop to connect the TMO-311C IP (192.168.144.1) 11. Go to Control Panel > Network Connections > Ethernet 1 2 3 4 22. Click Properties 31. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties 41. Select Use the following IP address and enter the IP address “192.168.144.
PAGE 2
Setup to Access WebUI (Network Security Authentication) 2/2 [Step 3] Use the browser (Google Chrome or Microsoft Edge or etc.) to enter the default IP address of MoCA device “192.168.144.200” in your computer/ laptop to access the WebUI page. [Step 4] Login the WebUI (Account/ Password: admin/ admin) ,and then visit Security Settings page for the Network Security Authentication.
PAGE 3
MoCA Security Setup 1/2 1. On the security settings page, tick three checkboxes, and then click the “Save” bottom. 2. The password can be changed to the new one. Please keep using the same password on all D-Ext/D-Low/Dhigh bands for all MoCA Security-enabled devices.
PAGE 4
MoCA Security Setup 2/2 1. Go to the reboot setting page, click the reboot bottom to apply the setting. [Note] Since the MoCA security-enabled devices can’t be accessed by MoCA Security-disabled devices, we suggest that the MoCA security procedure needs to be completed on every MoCA device individually, and then to connect devices to coaxial cable.
PAGE 5
MoCA Firmware Version Firmware Version: 2.12.