User's Manual

尺寸：80x110mm
材质：128g铜版纸 双面印刷
单黑印刷
9页8折
Thank you for choosing SmartWatch TGW007. For your safety, please
read this user manual carefully before use. We recommend that you
keep this user manual properly for further reference.
1. Preface
2. Product Information
④ Low battery
When the battery remains less than 10%, your watch will vibrate
once and display the following prompt, touch "✓" to back to the
latest mode.
When the battery remains less than 5%, your watch will vibrate once
and display the following prompt , touch "✓" back to the latest mode.
⑤ Charging
a.Please connect charging cable to the watch as follow.
b. Use a regular USB charger with output voltage of 5.0V and output
current of 0.5A and above to connect your charging line.
• The screen will show below page while charging.
• The screen will show below page when it is fully charged.
① Matters needing attention
The electronic equipment contained in the product, if improperly
handled or disposed of, may damage the environment or cause
harm:
7. Warning
• Warning: Unauthorized disassembly/assembly of the product is
prohibited.
• About the accuracy of this product
• The accuracy of this product has been tested by our quality
control department. Its performance parameters and sensors are
based on the above-men tioned technical standards and meet the
delivery conditions.
Battery Capacity
Working
Temperature
Storage Environ
ment
200mAh
50℉ to 113℉(Fahrenheit)
Temperature:-4℉ to 140℉(Fahrenheit)
RelativeHumidity:≤90%RH
⑥ FAQ
Issue
description
Incorrect
step
counting
Abnormal waggling or
vibration of device
Wear the watch properly
to avoid abnormal
vibration
Possible cause
Walked less than 15
steps
Solution
Failed to
sync up
data
Sliding or walking in
slippers
The mobile's Bluetooth
is off
Turn on your mobile's
Bluetooth
Restart the "TouchLink"
App
Out of Bluetooth signal
range
Keep your device close
to mobile device with
Bluetooth on
App is shut down or
crashed
Walk with normal
posture slippers
Walk more than 15 steps
continuously
No display
Connect to charger to
charge the Watch
Low battery
6. Specifications
① General description
The new SmartWatch TGW007 can help you track activity data and
health status. It supports 24/7 daily activity monitoring: steps,
distance, consumed calories and dynamic heart rate. Users can u
pdate their personal information such as gender, height, age, weight,
etc. from the "TouchLink" App. Data stored in the SmartWatch
TGW007 can be synced to the “TouchLink” and cloud server
through BLE 5.0.
5. Overview
Product Name
Product Model
Screen
Resolution
Sensor
Frequency Range
Bluetooth Version
Weight
Smart Watch
TGW007
1.69-inch TFT display
240 * 280 pixel
2402MHz-2480MHz
BLE5.1
Proximately 47g (with strap)
Accelerometer, Heart rate and SpO2
sensorCapacitive touch sensor
Smart Watch
TGW007
Buttons define：
UP button
Touch screen define：
Touch screen
Bluetooth
Transmitting Power
≤0db
Long press
Click
-In the shutdown state, long press to turn on.
-In the boot state, long press to shutdown/restart.
-When the watch displays dial interface, click the
up button to enter the application list interface .
-When the watch displays a non-dial interface,
click the button to return to the dial interface
-In sports mode, click the up button to pause.
Long press
In the main dial interface, long press to change the
dial.
Swipe left Switch card streams to heart rate and sleep, etc.
Swipe right
-Switch card streams to heart rate and sleep, etc.
-Return to the upper level interface.
Swipe up
-In the dial interface,swipe up to view messages.
-Change pages.
Swipe down
-In the dial interface, swipe down to enter shortcut
menu.
-Change pages.
• SmartWatch TGW007 (Built-in Polymer Lithium Battery)
• User Manual
• The Charger
3. In the box
4. Instructions
2 cm
③ Wear properly
Keep the touch button facing the user, make sure the bottom sensor
is clung to the skin. Keep the wristband 0.8 inch or more from the
wrist.
② E Label
To view E Label on your watch: go to Settings page --> System -->
Regulatory Information.
User Manual
① Install App and Pair-Up
Your SmartWatch TGW007 will turn on automatically while charging.
You can search & download "TouchLink" App on App Store / Google
Play to update your personal information (name, gender, height, age,
weight, etc.)
Please make sure the Bluetooth of your mobile device is on, then
open the "TouchLink" App for device pairing.
A. Open "TouchLink" App, “Me → bind new device → SmartWatch →
TGW007 → scan code connection”scan the device QR code displayed
on watch to start pairing.
B. Open "TouchLink” App, “Me → bind new device → SmartWatch→
TGW007→search connection”scan for nearby devices, then choose
intended Bluetooth MAC address or device name. Click "✓" to pair-up
your phone and your watch.
The watch will show "Whether to accept binding?" Click "✓" to accept
or "X" to refuse.
received, including interference that may cause undesired operation.
Caution
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment. Radiation Exposure Statement.
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
SAR tests are conducted using standard operating positions accepted
by the FCC with the device transmitting at its highest certified power
level in all tested frequency bands, although the SAR is determined at
the highest certified power level, the actual SAR level of the device
while operating can be well below the maximum value, in general,
the closer you are to a wireless base station antenna, the lower the
power output.
The charger
Button
Strap
Display Screen
Heart rate and SpO2 sensor
Heart rate and SpO2 LEDs Charging Interface
③Features:
• Bluetooth BLE5.1
• Full-screen touch
• 1.69 TFT display 240*280 pixel
• Daily Tracking: Steps / Calories / Sedentary
• Dynamic heart rate monitoring
• Breathing training
• Sleep monitoring report
• Call notification
• Find your phone
• Music control
• Camera control
• Do not open the shell.
• Do not replace the built-in battery by yourself.
• Do not use corrosive cleaner to clean the product.
• Do not charge when the product is wet.
• If the product is not completely dry, do not charge.
• Do not expose the product to direct sunlight for a long time.
• Do not use the product in a sauna or steam room.
• Do not place the product in a non-working temperature
environment.
• If the screen or shell is damaged, do not use the product.
• Do not put the product in the dishwasher, washing machine or
dryer.
• Do not throw the product into fire, the battery may explode.
• Please use the USB port of the computer or mobile phone charger
correctly when charging.
• If the temperature of the product rises sharply during charging,
please stop charging.
② Safety instructions
• The product is not a medical device and cannot be used to
diagnose, treat, cure or prevent any disease.
• Before starting or adjusting any exercise plan, please consult your
doctor.
• Some users may have skin irritation or allergies due to wearing
the product for too long. If you experience redness, swelling, itching,
or other allergies, please consult your doctor.
• Do not read the screen information while driving, distracted or
otherwise dangerous situations.
• This is not a toy. Do not let children or pets play with the product.
Small parts of the product may cause a choking hazard.
• Product functions may be affected by external factors such as
interference, and the data is for reference only.
• The product has a heart rate recording function. Wearing for a
long time may cause skin discomfort, allergies or risk of certain
diseases for some users.
If you have any of the following symptoms, please consult your
doctor before use or stop using the product:
-Epilepsy or sensitivity to light.
-Poor blood circulation or got bruises before; heart disease or other
diseases.
-Taking any medicine that is sensitive to light.
③ Medical Disclaimer
Warning: This SmartWatch TGW007 is not a medical device. The
SmartWatch TGW007 and its related Apps may not be used to
diagnose, treat, or prevent any disease or medical condition. Before
performing any exercise, sleep, or nutritional changes, be sure to
seek the advice of qualified medical professionals, otherwise serious
injury or death may result.
④ Other matters needing attention
• Do not dispose of watch batteries in violation of local household
waste management regulations.
• Packaging recycling should comply with local regulations.
⑤ Warning
• Throwing the battery into a fire or a hot oven, or mechanically
breaking or cutting the battery may cause an explosion.
• Placing the battery in an extremely high temperature environment
may cause explosion or leakage of flammable liquid or gas.
•The battery is under extremely low pressure, which may cause
explosion or leakage of flammable liquid or gas.
⑥ NCC warnings
According to the Management Measures for Low Power Radio Wave
Radiant Motors.
Article 12
• For certificated low-power radio frequency motors, neither the
company nor the user is allowed to change the frequency, increase
the power, or change the features and functions of the original design.
Article 14
• The use of low-power radio frequency motors must not affect
safety and interfere with legal communication. If interference is
found, it should be stopped immediately and improved to no
interference before continuing to use.
• Legal communication in the preceding paragraph refers to radio
communication operated in accordance with the provisions of the
Telecommunications Law.
• Low-power radio frequency motors must endure interference from
legal communications or industrial, scientific, and medical radio wave
radiation electrical equipment.
⑦ FCC statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
R- XXXXXXXX
IS 13253(PART 1)
IEC 60950-1
FCC ID: XXXXXXXXXXX
TouchGFX CO.,LTD
40A, Building H, Baoneng City (East Zone), No.3288,
Liuxian Road, Fuguang Community, Taoyuan Street,
Nanshan District, Shenzhen, China
Made in China