Operator's Manual

CAUTION
Componentsundertheseatwillbehot
ifthesprayerhasbeenrunning.Ifyou
touchhotcomponents,youmaybe
burned.
Allowthesprayertocoolbefore
performingmaintenanceortouching
componentsunderthehood.
3.Alignadrainpanundertheengineoillter
(Figure76).
g028169
Figure76
1.Drainplug
2.Engineoillter
4.Removetheoldoillter(Figure76).
Note:Disposeoftheusedoillteratacertied
recyclingcenter.
5.Wipecleanthesurfaceoftheoillteradapterof
theenginewitharag.
6.Filltheoillterwiththespeciedoil.
Note:Allowthelterelementtosaturatewith
oil.
7.Applyathincoatofthespeciedoiltotherubber
gasketonthereplacementoillter.
8.Installtheoilltertothelteradapterandturn
theoillterclockwiseuntiltherubbergasket
contactsthelteradapter,thentightenthelter
anadditional1/2turn(Figure76).
Note:Donotovertightentheoillter.
9.Wipecleananyresidualoil.
Engine-OilQuantity
5.1L(5.4USqt)withthelter;refertoEngine-Oil
Specication(page57)
ChangingtheEngineOil
ServiceInterval:Aftertherst50hours
Every200hoursChangetheoilmoreoften
whenoperatingthemachineunderheavyload
orinhightemperatures.
1.Alignadrainpanunderthedrainplug(Figure
76).
2.Removethedrainplug(Figure76)andallowthe
oiltodraincompletely.
Note:Checkthedrainplugsealforwear
anddamage;replacethesealifitiswornor
damaged.
Note:Disposeoftheusedoilatacertied
recyclingcenter.
3.Installthedrainplugintothedrainportofthe
engineoilpanandtightentheplugto33to37
N∙m(24to27ft-lb).
4.Tiltthepassengerseatforwardandalignthe
proprodintothedetentintheprop-rod-guide
slot.
5.Removetheoil-llercapfromthellerneckof
thevalvecoveroftheengine(Figure77)and
slowlypourapproximately80%ofthespecied
amountofoilintothellerneck.
g195189
Figure77
1.Low
4.Oil-llercap
2.Full5.Dipstick
3.High
6.Removethedipstickandchecktheoillevelin
theengine(Figure77).
7.Slowlyaddadditionalspeciedoiltobringtheoil
leveltothefullmarkonthedipstick(Figure77).
Important:Overllingtheenginewithoil
maycausedamagetotheengine.
58