Service Manual

HYDROSTATIC DRIVE SYSTEM
6-31Floating Deck Mid-Size Service Manual
6
17. After all necessary repairs have been made, recon-
nect the hydraulic hoses to the wheel motor fi ttings.
18. Slide the wheel and tire assembly onto the hub and
snug fi t the 4 lug nuts on the wheel hub studs (Fig.
1045).
22. Fill the reservoir with hydraulic fl uid (15w-50 syn-
thetic engine oil) as specifi ed. Note that there are fi ll
level lines inside of the reservoir (Fig. 1047).
Fig 1045 PICT-0380
Fig 1047 PICT-0382
23. Release the parking brake.
24. Bleed the hydraulic system. See “Bleeding the
Hydraulic System” on page 6-32.
19. Lower the machine so the rear tires are resting on
the ground.
20. Apply the parking brake.
21. Tighten and torque the 4 lug nuts to 85 + 8 ft-lbs.
(115 + 11 Nm) (Fig. 1046).
Fig 1046 PICT-0381