Service Manual
HY13-1512-006-M1/USA
Torqmotor™ Service Procedure
TC, TS, TB, TE, TJ, TF, TG, TH and TL Series
Parker Hannifi n Corporation
Hydraulic Pump/Motor Division
Greeneville, TN 37745 US
21
#032822 seal rings, #032435 commutator seal, #032809 inner seal, #028516 back up
ring, #478036 dirt & water seal, #028552 backup washer, #406018 grease pack and
bulletin #050015.
For reverse timed manifold, use MF015001.
Vespel commutator seal 032751.
Commutator set for rear ported unit MF018001A1
* TD Series motors were (5) five bolt end cover with (5) five bolt
housing. The newly released TE Series motors are (6) six bolt
end cover with (6) bolt housing.
1
Service housing ass’y ITEM #18 with part number suffix-A1 includes ITEM
#13, #14, #15 and #19.
2
Select the required bolt number in designated “DISPLACEMENT GROUP”
under bolt ITEM #1, 1A, 1B or 1C shown in designated “OPTION GROUP”
3
Castle Nut #025156 is required if the designated “OPTION GROUP” is AAAF,
AAAN, or AAAU.
4
Order (2) #032790 ITEM #18A for service housing assembly where manifold
ports are used.
Standard seal kit #SK000090 includes six #032821 seal rings, #032435 commuta-
tor seal, #032377 inner seal, #028516 backup, #478036 dirt & water seal, #406018
grease pack, bulletin #050015 and #028552 backup washer.
Special seal kit #SK000091 for units that use fire retardant fluids include six
TE Service Parts List Chart
EXPLODED VIEW
ITEM #
4
1, 1A, 1C 2 2 3 4 16
5 BOLT 6 BOLT COMMUTATOR SEAL INNER
DESCRIPTION BOLT END COVER END COVER SEAL RING (5) SEAL SENSOR
AAAA Standard Black Paint Item #1 MF016007 032435 032821 032377
AAAB No Paint Item #1 MF016007 032435 032821 032377
AAAC Corrosion Resistant Paint Item #1 MF016007 032435 032821 032377
AAAG Fluorocarbon Seals Item #1 MF016007 032435 032822 032809
AABJ Free Running Rotor Set Item #1 MF016007 032435 032821 032377
BBCK 1740 PSI Internal Bidirectional Relief, No Paint Item #1C MF016006A7 N/A
BBCM 1200 PSI Internal Bidirectional Relief, No Paint Item #1C MF016006A31 N/A
BBCN 2030 PSI Internal Bidirectional Relief, No Paint Item #1C MF016006A5 N/A
BBCP 1450 PSI Internal Bidirectional Relief, No Paint Item #1C MF016006A10 N/A
BBCT 1560 PSI Internal Bidirectional Relief, No Paint Item #1C MF016006A2 N/A
AAJV Bidirectional Shuttle Valve (3:30), Black Paint Item #1A MF016003A1 MF016009A1 032435 032821 032377
FSAA Speed Sensor, Black Paint Item #1 MF016007 032435 032821 032377 455069
FSAB Speed Sensor, No Paint Item #1 MF016007 032435 032821 032377 455069
FSAH Speed Sensor, Castle Nut, No Paint Item #1 MF016007 032435 032821 032377 455069
FSAJ Speed Sensor, Castle Nut, Black Paint Item #1 MF016007 032435 032821 032377 455069
OPTION GROUP
EXPLODED VIEW SPEED SENSOR
ITEM # 12 12A 12B 12
COUPLING WOODRUFF COUPLING
DESCRIPTION SHAFT KEY NUT SHAFT
01- Long 6B Snapwire Groove MF019007 MF019307
09- 1” Ø, 0.38 “Pinhole, 0.55” from end MF019000
10- 1” Short Woodruff Key 1/4” Tap MF019006 038015 (1/4x1) MF019306
11- 1” Short 6B Spline, 1/4” Snapwire Groove MF019003 MF019303
12- 1” Tapered (Short) MF019004 038015 (1/4x1) 025136 MF019304
13- 1” Long Woodruff Snapwire Groove MF019005 038015 (1/4x1) MF019305
14- 1” Ø, Double Pinhole MF019001
15- 1” Ø, 0.32 “Pinhole 0.4” from end MF019002
21- “-10 Code” plus Corrosion Resistant MF019008 MF019308
22- 25 mm Straight Shaft with 7 mm Keyway MF019009 039041
25- 1” Tapered SAE MF019011 038015 (1/4x1) 025136 MF019311
26- 25 mm Straight with 8 mm Keyway MF019012 039042 MF019312
28- 13 Tooth Spline MF019014 MF019314
69- 25mm Straight with 8mm (stainless steel) MF019412
70- 1” dia short, woodruff key, 1/4 tap (stainless steel) MF019406
75- 1” dia long, woodruff key, 1/4 tap (stainless steel) MF019446
COUPLING SHAFT GROUP
Vespel commutator seal kit #SK000100 includes six #032821 seal rings, #032751 commutator seal, #032377 inner seal, #028516 back up washer, #478036 dirt & water seal,
#406018 grease pack, #bulletin 050015 and #028552 steel backup washer.