Torbal Printers PRP-058C THERMAL RECEIPT PRINTER Specifications subjects to change without notice
1. Safety Notice: * Don't touch the printer head with anything. * Don't touch the cutter blade. * Don't bend the power cord excessively or place any heavy objects onto it. * Don't use the printer when it is out of order. This can cause a fire or an electrocution. * When connecting or disconnecting the plug, always hold the plug but not the cord. * Use only approved accessories and do not try to disassemble, repair or remodel it by yourself. * Install the printer on the stable surface.
4. Main Features: * Command protocal is based on ESC/POS standard. * Low-noise thermal printing. * Various layouts are possible by using page mode. * Repeated operation and copy printing are possible. * Character font size optional. * Easy paper-roll installation. * Easy paper jam clearance. * Easy maintenance for tasks such as head cleaning. * Built-in interface provides control capability for cash drawer. 5. Technique Spec. Print method Thermal line printing Print speed 120 mm/sec. Paper width 57.
6. Connection a. Connect the adapter cable to power connector of the printer. b. Connect the interface cable to the connector on the rear panel of the printer. c. Connect the cash drawer's RJ-11 phone jack to the connector on the rear panel. Power adapter Adapter cable 7. Paper Roll Installation a. Open the top cover, install the paper roll as the picture showing direction. b. Set the paper roll into the hollow, and pull on the leading edge of the paper towards you as shown. c.
Press to open the top cover and drop the paper roll 8. Setting the Printing Mode (DIP switches) The DIP switches are used to set the printer to perform various functions, such as cutter mode, character set, speed, beeper, print density and etc.
Dip Switches Function: Interface Serial DIP-8 Function ON OFF SW-1 No Yes SW-2 Select cutter Select beeper Yes SW-3 Select print density Dark No Light SW-4 Two-byte character code No Yes SW-5 Character per line 42 48 SW-6 DK(RJ11) port output signal Yes No OFF SW-7 ON OFF ON SW-8 ON ON OFF OFF 38400 115200 9600 19200 Baud rate Parallel& Ethernet SW-8 Print mode ON OFF Driver mode Normal mode 9. Driver Installation a.
b. Please choose the OS that matches with your computer system and press next. c. Please select PRP-058C Series for Install module.
