Manual

4
6. OPERATION
Step 1.Removethebatterycoverandplacethebatteryasshownbelow.(EnsurethatthePower/
volumeswitchissettotheOFFposition.)
Step 2.Replacethebatterycoverandsecurelylockit.
Step 3.SettheChannelselectorswitchtothesamechannelasthetransmitter.
Step 4.ConnectanoptionalearphonetotheEarphoneoutputterminalandputtheearphoneon
theear.
Step 5.SwitchonthepowerbyturningthePower/volumeswitchclockwise,andadjustthevolume.
TheOperation/batteryindicatoreitherlightsorflasheswhenthepoweristurnedon.
Step 6.Turnoffthepowerafteruse.
[State of the operation/battery indicator]
• Lightingstate(indicatessignalreceptionorstandby)
Steadilylit:Receivingasignal
Flashing: Standby(nosignalreception)
• Singlecolor(indicatesthestateofbatterycapacity)
Green: Fullcapacity
Orange: Insufficientcapacity
Red: Batteryexhausted
• Dualcolor(indicatesasettingerror)
Red/greenalternatelyflashing:Incorrectchannelsetting
[Battery replacement]
• AnewLR6/AAalkalinebatterywillcontinuouslyoperatetheunitforabout15hours.Whenthered
LEDlights,replacethebatterywithanewone.
• TheWB-2000batterywillcontinuouslyoperate theunitforabout16hours.Whenthered LED
lights,rechargetheWB-2000.
EAR
CH
0
2
3
4
5
6
8
9
A
B
C
D
E
F
1
OFF
PWR/VOL
Operation/battery indicator
7
Unlock the battery cover
to remove.
Place the battery.