Datasheet

TVP5150AM1

www.ti.com

SLES209E–NOVEMBER 2007– REVISED OCTOBER 2011

7 Revision History

Table 7-1. Revision History

REVISION COMMENTS

SLES209 Initial release

SLES209A AEC-Q100 qualification added

Section 2.3, Related Products added.

Section 2.4, Trademarks modified.

Section 3.16, Figure 3.5, Changed crystal parallel resistor recommendation.

Section 3.21.9, Luminance Brightness description modified.

Section 3.21.10, Chrominance Saturation description modified.

Section 3.21.12, Luminance Contrast description modified.

SLES209B Section 3.21.45, Status Register #3 description modified.

Section 3.21.49, CGMS-A added to register description.

Section 3.21.50, Gemstar 2x added to register description.

Section 3.21.58, Table 3-16, Recommended VBI Configuration RAM settings modifications.

Section 3.21.59, VDP Status Register modifications.

Section 6.1, Changed recommendation for resistor in parallel with the crystal.

Minor editorial changes throughout

Section 3.3, Figure 3-2, Chroma trap filter characteristics for NTSC added.

Section 3.3, Figure 3-3, Chroma trap filter characteristics for PAL added.

Section 3.4, Figure 3-4, Color low-pass filter characteristics added.

SLES209C

Section 3.8, Table 3-1, Modified name for register 1100b.

Section 3.20, Table 3-11, Added I2C indirect registers at address 21h-24h.

Section 4.9, Added Power Dissipation Ratings.

Section 3.6, Modified when color killer suppresses chrominance processing.

Section 3.21.29, Added Indirect Register Data

Section 3.21.30, Added Indirect Register Address

SLES209D Section 3.21.31, Added Indirect Register Read/Write Strobe

Section 3.21.38, Added Patch Write Address

Section 3.21.39, Added Patch Code Execute

Section 3.21.53, Added Patch Read Address

Section 2.3, Table 2-1, Modified description for terminal 27

Section 3.20, Table 3-11, Added register 33h, modified registers 82h and 83h.

Section 3.21.4, Modified description for bits 7:5 of I

C register 03h

SLES209E Section 3.21.15, Removed support for 1x output clock frequency (bit 0 of register 0Fh)

Section 3.21.43, Modified the register description for register 82h.

Section 3.21.44, Modified the register description for register 83h.

Figure 6-1, Added note concerning ESD protection. Added pulldown and pullup resistors to pin 27 output.

Submit Documentation Feedback