Datasheet

Performance Specification Summary
1-3
Introduction
1.2 Performance Specification Summary
A summary of the TPS54973EVM−017 performance specifications is
provided in Table 1−2. Specifications are given for an input voltage of 3.3 V and
an output voltage of 1.8 V unless otherwise specified. The ambient
temperature is 25°C for all measurements, unless otherwise noted. The data
presented in Table 1−2 was compiled with no precharge on the output (J3
open, no voltage source present on J4). Using the precharge circuitry on this
EVM requires careful consideration of line and load conditions for proper
operation and may limit the useful operating range of the TPS54973 device.
Table 1−2.TPS54973EVM-017 Performance Specification Summary
Parameters Test Conditions Min Typ Max Units
Input voltage range 3.0 3.3 4.0 V
Output voltage set point 1.8 V
Output current range V
I
= 3 V to 4 V −9 9 A
Line regulation I
O
= 4.5 A, V
I
= 3 V to 4 V ±0.1%
Load regulation V
I
= 3.3 V, I
O
= 0 to 9 A ±0.3%
Voltage change
I
O
= 2.25 A to 6.75 A
−50 mV
PK
Load transient
Recovery time
I
O
= 2.25 A to 6.75 A
160 µs
Load transient
response
Voltage change
I
O
= 6.75 A to 2.25 A
50 mV
PK
response
Recovery time
I
O
= 6.75 A to 2.25 A
160 µs
Loop bandwidth V
I
= 3 V 65 kHz
Phase margin V
I
= 3 V 54 _
Loop bandwidth V
I
= 4 V 80 kHz
Phase margin V
I
= 4 V 48 _
Input ripple voltage 80 200 mV
PP
Output ripple voltage 6 10 mV
PP
Output rise time 9 ms
Operating frequency 700 kHz
Max efficiency V
I
= 3.3 V, V
O
= 1.8 V, I
O
= 1.5 A 92%