Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Op-amp Multi-purpose SOIC 16

TLE202x, TLE202xA, TLE202xB, TLE202xY

EXCALIBUR HIGH-SPEED LOW-POWER PRECISION

OPERATIONAL AMPLIFIERS



SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

D Supply Current . . . 300 μA Max

D High Unity-Gain Bandwidth...2 MHz Typ

D High Slew Rate . . . 0.45 V/μs Min

D Supply-Current Change Over Military Temp

Range ...10 μA Typ at V

= ± 15 V

D Specified for Both 5-V Single-Supply and

±15-V Operation

D Phase-Reversal Protection

D High Open-Loop Gain...6.5 V/μV

(136 dB) Typ

D Low Offset Voltage . . . 100 μV Max

D Offset Voltage Drift With Time

0.005 μV/mo Typ

D Low Input Bias Current . . . 50 nA Max

D Low Noise Voltage . . . 19 nV/√Hz Typ

description

The TLE202x, TLE202xA, and TLE202xB devices are precision, high-speed, low-power operational amplifiers

using a new Texas Instruments Excalibur process. These devices combine the best features of the OP21 with

highly improved slew rate and unity-gain bandwidth.

The complementary bipolar Excalibur process utilizes isolated vertical pnp transistors that yield dramatic

improvement in unity-gain bandwidth and slew rate over similar devices.

The addition of a bias circuit in conjunction with this process results in extremely stable parameters with both

time and temperature. This means that a precision device remains a precision device even with changes in

temperature and over years of use.

This combination of excellent dc performance with a common-mode input voltage range that includes the

negative rail makes these devices the ideal choice for low-level signal conditioning applications in either

single-supply or split-supply configurations. In addition, these devices offer phase-reversal protection circuitry

that eliminates an unexpected change in output states when one of the inputs goes below the negative supply

rail.

A variety of available options includes small-outline and chip-carrier versions for high-density systems

applications.

The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized

for operation from −40°C to 85°C. The M-suffix devices are characterized for operation over the full military

temperature range of −55°C to 125°C.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.



Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

All trademarks are the property of their respective owners.

Summary of content (77 pages)

PAGE 1
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 D D D D D D Supply Current . . . 300 μA Max High Unity-Gain Bandwidth . . . 2 MHz Typ High Slew Rate . . . 0.45 V/μs Min Supply-Current Change Over Military Temp Range . . . 10 μA Typ at VCC ± = ± 15 V Specified for Both 5-V Single-Supply and ±15-V Operation Phase-Reversal Protection D High Open-Loop Gain . . . 6.
PAGE 2
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TLE2021 AVAILABLE OPTIONS PACKAGED DEVICES TA VIOmax AT 25°C SMALL OUTLINE† (D) SSOP‡ (DB) CHIP CARRIER (FK) CERAMIC DIP (JG) PLASTIC DIP (P) TSSOP‡ (PW) CHIP FORM§ (Y) 0°C 0 C to 70°C 200 μV 500 μV TLE2021ACD TLE2021CD TLE2021CDBLE — — TLE2021ACP TLE2021CP — TLE2021CPWLE — TLE2021Y −40°C to 85°C 200 μV 500 μV TLE2021AID TLE2021ID —
PAGE 3
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TLE2021 D, DB, JG, P, OR PW PACKAGE (TOP VIEW) 1 8 2 7 3 6 4 5 NC OFFSET N1 NC NC NC OFFSET N1 IN− IN+ VCC − /GND TLE2021 FK PACKAGE (TOP VIEW) NC VCC+ OUT OFFSET N2 NC IN− NC IN+ NC 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC VCC+ NC OUT NC NC V CC−/ GND NC OFFSET N2 NC NC − No internal connection 4 1OUT 1IN− 1IN+ VCC −
PAGE 4
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TLE2021Y chip information This chip, when properly assembled, display characteristics similar to the TLE2021. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. This chip may be mounted with conductive epoxy or a gold-silicon preform.
PAGE 5
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TLE2022Y chip information This chip, when properly assembled, displays characteristics similar to TLE2022. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. This chip may be mounted with conductive epoxy or a gold-silicon preform.
PAGE 6
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TLE2024Y chip information This chip, when properly assembled, displays characteristics similar to the TLE2024. Thermal compression or ultrasonic bonding may be used on the doped aluminum-bonding pads. This chip may be mounted with conductive epoxy or a gold-silicon preform.
PAGE 7
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 equivalent schematic (each amplifier) VCC+ Q3 Q13 Q7 Q22 Q17 Q28 IN − IN + Q34 Q39 Q36 Q38 Q11 D3 Q2 Q32 Q24 Q20 Q8 Q35 Q29 Q19 Q1 Q5 Q31 C4 Q4 Q12 D4 Q14 D1 D2 R7 Q23 Q25 C2 Q10 OUT Q40 C3 Q21 Q27 R6 R1 C1 OFFSET N1 Q6 Q9 R2 R4 R3 R5 Q15 Q30 Q33 Q26 Q18 Q37 Q16 OFFSET N2 VCC − /GND ACTUAL DEVICE COMPONENT
PAGE 8
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 V Supply voltage, VCC − (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 9
TLE2021 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current TLE2021C MIN 25°C RS = 50 Ω 120 600 TYP MAX 100 300 MIN TYP MAX 80 200 600 300 UNIT μV V 2 2 μV/°C 25°C 0.005 0.005 0.005 μV/mo 25°C 0.2 25 Full range 0 to 3.5 Full range 0 to 3.
PAGE 10
VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VICR VOM+ Common mode input voltage range Common-mode Maximum positive peak output voltage swing TEST CONDITIONS TA† TLE2021C MIN 25°C Full range 500 RS = 50 Ω 200 TYP MAX 40 100 500 200 UNIT μV V μV/°C 25°C 0.006 0.006 0.006 μV/mo 25°C 0.2 25 −15 to 13.
PAGE 11
TLE2022 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term long term drift (see Note 4) IIO Input offset current IIB Input bias current VIC = 0 0, RS = 50 Ω CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply-voltage Supply voltage rejection ratio (ΔVCC ± /ΔVIO) VCC = 5 V to 30 V ICC Supply cur
PAGE 12
VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term long term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VICR TLE2022C MIN 25°C VIC = 0 0, RS = 50 Ω MAX 150 500 VO = ± 10 V, V RL = 10 kΩ CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply-voltage Supply voltage rejection ratio (ΔVCC ± /ΔVIO) 5 V to ± 15 V 2.
PAGE 13
TLE2024 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current VIC = 0, RS = 50 Ω TYP VO = 1.
PAGE 14
VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VICR VOM + Common mode input voltage Common-mode range Maximum positive peak output voltage swing TEST CONDITIONS VIC = 0, RS = 50 Ω TYP VO = ± 10 V V, RL = 10 kΩ CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply voltage rejection
PAGE 15
TLE2021 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current TLE2021I MIN 25°C MAX 120 600 Full range RS = 50 Ω Large signal differential Large-signal voltage amplification VO = 1.
PAGE 16
VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VICR VOM + Common-mode Common mode input voltage range Maximum positive peak output voltage swing TEST CONDITIONS TA† TLE2021I MIN 25°C Full range 500 RS = 50 Ω 80 200 MIN TYP MAX 40 100 500 200 UNIT μV V 2 μV/°C 25°C 0.006 0.006 0.006 μV/mo 25°C 0.
PAGE 17
TLE2022 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term long term drift (see Note 4) IIO Input offset current IIB Input bias current VIC = 0 0, RS = 50 Ω CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply-voltage Supply voltage rejection ratio (ΔVCC ± /ΔVIO) VCC = 5 V to 30 V ICC Supply cur
PAGE 18
VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term long term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VICR TLE2022I MIN 25°C VIC = 0 0, RS = 50 Ω MAX 150 500 VO = ± 10 V, V RL = 10 kΩ CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply-voltage Supply voltage rejection ratio (ΔVCC ± /ΔVIO) VCC = ± 2 5 V to ± 15 V 2.
PAGE 19
TLE2024 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current Maximum positive peak output voltage swing VIC = 0, RS = 50 Ω TYP RL = 10 kΩ CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply voltage rejection ratio Supply-voltage (
PAGE 20
VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VICR VOM + Common mode input voltage Common-mode range Maximum positive peak output voltage swing TEST CONDITIONS VIC = 0, RS = 50 Ω TYP VO = ± 10 V V, RL = 10 kΩ CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply voltage rejection
PAGE 21
TLE2021 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current Common mode input Common-mode voltage range 25°C TYP 120 VIC = 0, RS = 50 Ω RL = 10 kΩ CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply voltage rejection ratio Suppl
PAGE 22
VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VICR Common mode input Common-mode voltage range TEST CONDITIONS 25°C TYP 120 VIC = 0, RS = 50 Ω VO = ± 10 V, V RL = 10 kΩ CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply voltage rejection ratio Supply-voltage (ΔVCC ± /ΔVIO) VCC
PAGE 23
TLE2022 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term long term drift (see Note 4) IIO Input offset current IIB Input bias current VIC = 0 0, RS = 50 Ω CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply-voltage Supply voltage rejection ratio (ΔVCC ± /ΔVIO) VCC = 5 V to 30 V ICC Supply cur
PAGE 24
VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term long term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VICR TLE2022M MIN 25°C VIC = 0 0, RS = 50 Ω MAX 150 500 VO = ± 10 V, V RL = 10 kΩ CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply-voltage Supply voltage rejection ratio (ΔVCC ± /ΔVIO) VCC ± = ± 2 5 V to ± 15 V 2.
PAGE 25
TLE2024 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current Maximum positive peak output voltage swing VIC = 0, RS = 50 Ω TYP RL = 10 kΩ CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply voltage rejection ratio Supply-voltage (
PAGE 26
VIO Input offset voltage αVIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 VICR VOM + Common mode input voltage Common-mode range Maximum positive peak output voltage swing TEST CONDITIONS VIC = 0, RS = 50 Ω TYP VO = ± 10 V V, RL = 10 kΩ CMRR Common mode rejection ratio Common-mode VIC = VICRmin min, RS = 50 Ω kSVR Supply voltage rejection
PAGE 27
TLE2021 operating characteristics, VCC = 5 V, TA = 25°C PARAMETER SR TEST CONDITIONS See Figure 1 TA C SUFFIX MIN TYP I SUFFIX MAX MIN TYP M SUFFIX MAX MIN TYP 0.5 MAX 0.5 UNIT Slew rate at unity gain VO = 1 V to 3 V, 25°C 0.5 Vn Equivalent input noise voltage (see Figure 2) f = 10 Hz 25°C 21 50 21 50 21 V/μs f = 1 kHz 25°C 17 30 17 30 17 VN(PP) Peak to peak equivalent input Peak-to-peak noise voltage f = 0.1 to 1 Hz 25°C 0.16 0.16 0.16 f = 0.1 to 10 Hz 25°C 0.
PAGE 28
SR TEST CONDITIONS C SUFFIX MIN See Figure 1 TYP I SUFFIX MAX MIN 0.5 TYP M SUFFIX MAX MIN 0.5 TYP Slew rate at unity gain VO = 1 V to 3 V, Vn Equivalent input noise voltage (see Figure 2) f = 10 Hz 21 50 21 50 21 f = 1 kHz 17 30 17 30 17 VN(PP) Peak to peak equivalent input noise voltage Peak-to-peak In Equivalent input noise current B1 Unity-gain bandwidth See Figure 3 φm Phase margin at unity gain See Figure 3 MAX 0.5 UNIT V/μs nV/√Hz f = 0.1 to 1 Hz 0.16 0.
PAGE 29
TLE2024 operating characteristics, VCC = 5 V, TA = 25°C PARAMETER SR TEST CONDITIONS Slew rate at unity gain VO = 1 V to 3 V, C SUFFIX MIN See Figure 1 TYP I SUFFIX MAX MIN 0.5 TYP M SUFFIX MAX MIN 0.5 TYP 0.
PAGE 30
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TLE2021Y electrical characteristics at VCC = 5 V, TA = 25°C (unless otherwise noted) PARAMETER VIO TEST CONDITIONS TLE2021Y MIN Input offset voltage Input offset current IIB Input bias current MAX 150 Input offset voltage long-term drift (see Note 4) IIO TYP VIC = 0 0, μV 0.005 RS = 50 Ω RS = 50 Ω UNIT μV/mo 0.5 nA 35 nA − 0.
PAGE 31
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TLE2022Y electrical characteristics, VCC = 5 V, TA = 25°C (unless otherwise noted) PARAMETER VIO TEST CONDITIONS TLE2022Y MIN Input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current VIC = 0 0, TYP MAX 150 600 0.005 RS = 50 Ω RS = 50 Ω UNIT μV μV/mo 0.5 nA 35 nA − 0.
PAGE 32
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TLE2024Y electrical characteristics, VCC = 5 V, TA = 25°C (unless otherwise noted) PARAMETER TEST CONDITIONS TLE2024Y MIN Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current TYP MAX 0.005 VIC = 0, RS = 50 Ω RS = 50 Ω UNIT μV/mo 0.6 nA 45 nA −0.3 to 4 V 4.2 V 0.
PAGE 33
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 PARAMETER MEASUREMENT INFORMATION 20 kΩ 20 kΩ 5V 15 V − VO VI + 30 pF (see Note A) VO + − VI −15 V 30 pF (see Note A) 20 kΩ (a) SINGLE SUPPLY 20 kΩ (b) SPLIT SUPPLY NOTE A: CL includes fixture capacitance. Figure 1. Slew-Rate Test Circuit 2 kΩ 2 kΩ 15 V 5V − 20 Ω VO − VO + 2.
PAGE 34
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 PARAMETER MEASUREMENT INFORMATION 5V VO VI + 10 kΩ VO + − 10 kΩ − 0.1 μF VI 15 V − 15 V 10 kΩ 30 pF (see Note A) 30 pF (see Note A) (a) SINGLE SUPPLY 10 kΩ (b) SPLIT SUPPLY NOTE A: CL includes fixture capacitance. Figure 4.
PAGE 35
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS Table of Graphs FIGURE VIO Input offset voltage Distribution IIB Input bias current vs Common-mode input voltage vs Free-air temperature II Input current vs Differential input voltage VOM Maximum peak output voltage vs Output current vs Free-air temperature VOH High-level output voltage vs High-level output current v
PAGE 36
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS DISTRIBUTION OF TLE2022 INPUT OFFSET VOLTAGE DISTRIBUTION OF TLE2021 INPUT OFFSET VOLTAGE 20 ÏÏÏÏ TA = 25°C 16 Percentage of Units − % Percentage of Units − % 398 Amplifiers Tested From 1 Wafer Lot VCC ± = ± 15 V TA = 25°C P Package 16 ÏÏÏÏÏÏÏÏÏÏÏ 20 231 Units Tested From 1 Wafer Lot VCC ± = ± 15 V 12 8 4 P Package
PAGE 37
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2022 INPUT BIAS CURRENT vs COMMON-MODE INPUT VOLTAGE TLE2024 INPUT BIAS CURRENT vs COMMON-MODE INPUT VOLTAGE −50 −60 VCC ± = ± 15 V TA = 25°C TA = 25°C IIIB IB − Input Bias Current − nA IIB I IB − Input Bias Current − nA −45 VCC ± = ± 15 V −40 −35 −30 −40 ÁÁ ÁÁ −25 −20 −15 −50 −10 −5 0 5 10 VIC − Common-Mode Inp
PAGE 38
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2024 INPUT BIAS CURRENT† vs FREE-AIR TEMPERATURE ÏÏÏÏÏ ÏÏÏ ÏÏÏ ÏÏÏ 1 VCC± = ±15 V VO = 0 VIC = 0 −50 VCC± = ±15 V VIC = 0 TA = 25°C 0.9 0.8 I III − Input Current − mA IIB − Input Bias Current − nA IIB −60 ÁÁ ÁÁ INPUT CURRENT vs DIFFERENTIAL INPUT VOLTAGE −40 −30 0.7 0.6 0.5 0.4 0.3 0.2 0.
PAGE 39
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2024 MAXIMUM PEAK OUTPUT VOLTAGE vs OUTPUT CURRENT 15 ÏÏÏÏ VCC ± = ± 15 V TA = 25°C 14 12 ÏÏÏ ÏÏÏ 10 VOM − 8 |VVOM| OM − Maximum Peak Output Voltage − V VOM − Maximum Peak Output Voltage − V VOM 16 MAXIMUM PEAK OUTPUT VOLTAGE† vs FREE-AIR TEMPERATURE ÏÏÏ VOM + 6 ÁÁ ÁÁ ÁÁ 4 2 0 0 2 8 10 4 6 IO − Output Current
PAGE 40
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS 5 HIGH-LEVEL OUTPUT VOLTAGE† vs FREE-AIR TEMPERATURE LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 5 ÁÁ ÁÁ VOL VOL − Low-Level Output Voltage − V VOH VOH − High-Level Output Voltage − V VCC = 5 V 4.8 4.6 No Load 4.4 ÁÁ ÁÁ ÁÁ RL = 10 kΩ 4.
PAGE 41
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY VVOPP O(PP) − Maximum Peak-to-Peak Output Voltage − V 30 25 20 15 10 ÁÁ ÁÁÁÁ ÁÁ ÁÁÁÁ ÁÁ ÁÁÁÁ ÁÁ VCC ± = ± 15 V RL = 10 kΩ TA = 25°C 5 0 100 1k 10 k 100 k f − Frequency − Hz 1M Figure 25 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY ÏÏÏÏÏ
PAGE 42
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2021 LARGE-SCALE DIFFERENTIAL VOLTAGE AMPLIFICATION† vs FREE-AIR TEMPERATURE TLE2022 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION† vs FREE-AIR TEMPERATURE 10 6 RL = 10 kΩ ÏÏÏÏÏÏ ÏÏÏÏÏÏ 8 5 AVD AVD − Large-Signal Differential Voltage Amplification − V/μV AVD − Large-Signal Differential Voltage Amplification − V/ μ V R
PAGE 43
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2022 AND TLE2024 SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE TLE2021 SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE 12 VO = 0 TA = 25°C 10 ÏÏÏÏÏ VID = −100 mV 5 0 −5 VID = 100 mV −10 −15 0 2 4 6 8 10 12 14 TA = 25°C IIOS OS − Short-Circuit Output Current − mA I OS − Short-Circuit Output Current − mA IOS
PAGE 44
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2022 AND TLE2024 SHORT-CIRCUIT OUTPUT CURRENT † vs FREE-AIR TEMPERATURE TLE2021 SHORT-CIRCUIT OUTPUT CURRENT† vs FREE-AIR TEMPERATURE 12 VCC = 5 V VID = −100 mV VO = 5 V 4 IOS I OS − Short-Circuit Output Current − mA IOS I OS− Short-Circuit Output Current − mA 6 2 0 −2 −4 ÏÏÏ ÏÏÏÏÏ ÏÏÏ −8 −10 −75 −50 −25 0 25 50
PAGE 45
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2022 SUPPLY CURRENT vs SUPPLY VOLTAGE 500 TLE2024 SUPPLY CURRENT vs SUPPLY VOLTAGE 1000 VO = 0 No Load 800 I CC − Supply Current − μ A IICC A CC − Supply Current − μua TA = 125°C No Load 400 TA = 25°C 300 TA = 125°C TA = − 55°C ÁÁ ÁÁ ÁÁ 200 100 0 ÏÏÏÏ VO = 0 TA = 25°C 600 TA = − 55°C 400 200 0 2 4 6 8 10
PAGE 46
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS 1000 120 CMRR − Common-Mode Rejection Ratio − dB ÏÏÏÏÏ ÏÏÏÏÏ ÏÏÏÏÏ VCC ± = ± 15 V 800 I CC − Supply Current − μ A TLE2021 COMMON-MODE REJECTION RATIO vs FREQUENCY TLE2024 SUPPLY CURRENT † vs FREE-AIR TEMPERATURE VCC ± = ± 2.
PAGE 47
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2022 SLEW RATE† vs FREE-AIR TEMPERATURE TLE2021 SLEW RATE† vs FREE-AIR TEMPERATURE 1 1 ÏÏÏÏÏ ÏÏÏÏÏ ÏÏÏÏ ÏÏÏÏ VCC ± = ± 15 V 0.8 VCC = 5 V 0.6 0.4 0.2 0 −75 VCC ± = ± 15 V SR − Slew Rate − V/ μ uss SR − Slew Rate − V/us μs 0.8 0.6 VCC = 5 V 0.4 0.
PAGE 48
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE 4 VCC = 5 V RL = 10 kΩ CL = 30 pF TA = 25°C See Figure 4 ÏÏÏÏÏ 2.55 VO − Output Voltage − V VO VO − Output Voltage − V VO 2.6 TLE2021 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 2.5 ÁÁÁ ÁÁÁ VCC = 5 V RL = 10 kΩ CL = 30 pF TA = 25°C See Figure 1 ÏÏÏÏÏ ÏÏÏÏÏ 3 2 ÁÁ ÁÁ 2.
PAGE 49
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2021 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE VO − Output Voltage − V VO 10 15 VCC ± = ± 15 V RL = 10 kΩ CL = 30 pF TA = 25°C See Figure 1 10 VO VO − Output Voltage − V 15 TLE2022 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 5 0 ÁÁ ÁÁ ÁÁ ÁÁ −5 −10 −15 0 20 40 t − Time − μs 60 ÏÏÏÏÏÏ ÏÏÏÏÏÏ VCC ± = ± 15 V R
PAGE 50
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 PEAK-TO-PEAK EQUIVALENT INPUT NOISE VOLTAGE 0.1 TO 10 Hz 0.5 VCC ± = ± 15 V 0.4 TA = 25°C 0.3 0.2 0.1 0 − 0.1 − 0.2 − 0.3 ÁÁÁ ÁÁÁ ÁÁÁ − 0.4 − 0.
PAGE 51
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2021 UNITY-GAIN BANDWIDTH† vs FREE-AIR TEMPERATURE 4 TLE2022 AND TLE2024 UNITY-GAIN BANDWIDTH† vs FREE-AIR TEMPERATURE 4 RL = 10 kΩ 3 VCC ± = ± 15 V 2 ÏÏÏÏÏ 1 VCC = 5 V 0 −75 −50 −25 0 25 50 75 TA − Free-Air Temperature − °C 100 3 ÏÏÏÏÏÏ ÏÏÏÏÏÏ VCC ± = ± 15 V 2 VCC = 5 V 1 0 −75 125 −50 −25 0 25 50 75 100 TA −
PAGE 52
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 TYPICAL CHARACTERISTICS TLE2022 AND TLE2024 PHASE MARGIN vs LOAD CAPACITANCE TLE2021 PHASE MARGIN vs LOAD CAPACITANCE 60° 60° 50° 40° VCC = 5 V 30° VCC = 5 V 30° 10° 20° 10° 0 20 40 60 80 CL − Load Capacitance − pF 0° 100 0 20 40 60 80 CL − Load Capacitance − pF 50° 48° TLE2022 AND TLE2024 PHASE MARGIN† vs FREE-AIR TEMPERATURE 54° RL =
PAGE 53
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 APPLICATION INFORMATION voltage-follower applications The TLE202x circuitry includes input-protection diodes to limit the voltage across the input transistors; however, no provision is made in the circuit to limit the current if these diodes are forward biased.
PAGE 54
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 APPLICATION INFORMATION macromodel information Macromodel information provided was derived using Microsim Parts™, the model generation software used with Microsim PSpice™. The Boyle macromodel (see Note 5) and subcircuit in Figure 73, Figure 74, and Figure 75 were generated using the TLE202x typical electrical and operating characteristics at 25°C.
PAGE 55
TLE202x, TLE202xA, TLE202xB, TLE202xY EXCALIBUR HIGH-SPEED LOW-POWER PRECISION OPERATIONAL AMPLIFIERS SLOS191D − FEBRUARY 1997 − REVISED NOVEMBER 2010 .SUBCKT TLE2021 1 2 3 4 5 * c1 11 12 6.244E−12 c2 6 7 13.4E−12 c3 87 0 10.64E−9 cpsr 85 86 15.9E−9 dcm+ 81 82 dx dcm− 83 81 dx dc 5 53 dx de 54 5 dx dlp 90 91 dx dln 92 90 dx dp 4 3 dx ecmr 84 99 (2 99) 1 egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5 epsr 85 0 poly(1) (3,4) −60E−6 2.
PAGE 56
PACKAGE OPTION ADDENDUM www.ti.
PAGE 57
PACKAGE OPTION ADDENDUM www.ti.
PAGE 58
PACKAGE OPTION ADDENDUM www.ti.
PAGE 59
PACKAGE OPTION ADDENDUM www.ti.
PAGE 60
PACKAGE OPTION ADDENDUM www.ti.
PAGE 61
PACKAGE OPTION ADDENDUM www.ti.
PAGE 62
PACKAGE OPTION ADDENDUM www.ti.
PAGE 63
PACKAGE OPTION ADDENDUM www.ti.
PAGE 64
PACKAGE OPTION ADDENDUM www.ti.com 31-Oct-2013 ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
PAGE 65
PACKAGE OPTION ADDENDUM www.ti.
PAGE 66
PACKAGE MATERIALS INFORMATION www.ti.com 11-Oct-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TLE2021ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2021ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2021AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2021CDR SOIC D 8 2500 330.
PAGE 67
PACKAGE MATERIALS INFORMATION www.ti.com 11-Oct-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLE2021ACDR SOIC D 8 2500 340.5 338.1 20.6 TLE2021ACDR SOIC D 8 2500 367.0 367.0 35.0 TLE2021AIDR SOIC D 8 2500 340.5 338.1 20.6 TLE2021CDR SOIC D 8 2500 340.5 338.1 20.6 TLE2021CPWR TSSOP PW 8 2000 367.0 367.0 35.0 TLE2021IDR SOIC D 8 2500 340.5 338.1 20.
PAGE 68
MECHANICAL DATA MCER001A – JANUARY 1995 – REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0°–15° 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters).
PAGE 69
PAGE 70
PAGE 71
PAGE 72
PAGE 73
PAGE 74
PAGE 75
PAGE 76
PAGE 77
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.