Datasheet

www.ti.com Instruction Set
3.4.6.32 MOV
MOV[.W] Move source to destination
MOV.B Move source to destination
Syntax MOV src,dst or MOV.W src,dst
MOV.B src,dst
Operation src → dst
Description The source operand is moved to the destination.
The source operand is not affected. The previous contents of the destination are lost.
Status Bits Status bits are not affected.
Mode Bits OSCOFF, CPUOFF,and GIE are not affected.
Example The contents of table EDE (word data) are copied to table TOM. The length of the tables
must be 020h locations.
MOV #EDE,R10 ; Prepare pointer
MOV #020h,R9 ; Prepare counter
Loop MOV @R10+,TOM-EDE-2(R10) ; Use pointer in R10 for both tables
DEC R9 ; Decrement counter
JNZ Loop ; Counter not 0, continue copying
...... ; Copying completed
......
......
Example The contents of table EDE (byte data) are copied to table TOM. The length of the tables
should be 020h locations
MOV #EDE,R10 ; Prepare pointer
MOV #020h,R9 ; Prepare counter
Loop MOV.B @R10+,TOM-EDE-1(R10) ; Use pointer in R10 for
; both tables
DEC R9 ; Decrement counter
JNZ Loop ; Counter not 0, continue
; copying
...... ; Copying completed
......
......
95
SLAU144J–December 2004–Revised July 2013 CPU
Submit Documentation Feedback
Copyright © 2004–2013, Texas Instruments Incorporated