Quick Start Guide

QUICK START GUIDE
WIRED CHARGING
Ensure the cable plugs into USB-A port ( ) in Wireless Charger and connect
USB-C plug ( ) to the mobile device. Press the power button quickly to
activate output charging.
W
IRELESS CHARGING FOR CHARGER
Place the rear side of wireless charger on the wireless charging device to
charge.
WIRED CHARGING FOR CHARGER
Ensure the cable plugs into USB-C port ( ) and connect USB-A plug ( )
into power supply to charge the wireless charger.
PRODUCT SPECIFICATIONS
Product Name: Mobile Power Supply
Input: 5V/2.0A (Type-C) Output: 5V/2.0A; 9V/2.0A (USB-A)
Rated Capacity: 10000mAh/38.5Wh Wireless Output Power: 5W;
Maximum Fast Charging Support: 10W
Product Dimension: 141.5×70×160mm
POWER STATUS
Fast Charge
Indicator
25% 50% 75% 100%
Press Power Button ( ) quickly to view the remaining capacity.
WIRELESS CHARGING
Press and hold Power Button ( ) for 3 seconds to start wireless charging.
First LED will:
Be on when wireless charging is on
turn off in 30 seconds if wireless charging device is not detected
turn off when a foreign object is detected
War
ning:
Changes or modifications to this unit not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate the
equipment.
NOTE:
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
FCC S
tatement:
This equi
pment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance with
the in
structions, may cause harmful
interferen
ce to radio communications.
Ho
wever, there is no guarantee that
in
terference will not occur in a
particular installation. If this equipment
does
cause harmful interference to radio
or
television reception, which can be
determined by tur
ning the equipment off
and on, the use
r is encouraged to try to
correct the interference by one or more
of the foll
owing measures:
—
Reorient or relocate the receiving
an
tenna.
—
Increase the separation between the
equipment and receiver.
—
Connect the equipment into an outlet on
a c
ircuit different from that to which the
r
eceiver is connected.
—
Consult the dealer or an experienced
radio/TV technician for help.
RF exposure compliance statement:
This
device has been evaluated to meet
the gene
ral RF exposure requirement