Quick Start Owner's manual

ManualsBrandsTeledyne LeCroy ManualsEquipmentPCIe Summit Z3-16 with CLKREQ

Introduction

Use this document for quick installation and setup.

If you experience problems or need more information, see

the Summit Z3-16 User Manual on the PETracer Installation

CD or at the Teledyne LeCroy web site.

Please see the Readme file on the installation CD for the

latest software version and for host machine requirements.

Summit Z3-16

PCI Express Exerciser with CLKREQ# support

Quick Start

Components

The package includes the following components:

• Summit Z3-16™ exerciser card with CLKREQ# support

• Power Adapter

• x16 to x1 Edge Adapter

• x16 to x4 Edge Adapter

• x16 to x8 Edge Adapter

• USB and Ethernet cables

•PETracer Software program CD-ROM

Depending on configuration, the package may also include:

• PCI Express Test Platform for Summit™ Z3-16 Exerciser with

CLKREQ# and SRIS Support

Please see the Summit Z3-16 User Manual on the

installation CD for component specifications and further

details.

Summit Z3-16 Exerciser Card with CLKREQ# support

Unpacking the Exerciser

Inspect the received shipping container for any damage. Unpack the container and account for each of the system

components listed on the accompanying packing list. Visually inspect each component for absence of damage.

In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper’s inspection.

Unpacking the Exerciser

Inspect the received shipping container for any damage. Unpack the container and account for each of the system

components listed on the accompanying packing list. Visually inspect each component for absence of damage.

In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper’s inspection.

Summary of content (4 pages)

PAGE 1
Summit Z3-16 PCI Express Exerciser with CLKREQ# support Quick Start 1 Introduction Use this document for quick installation and setup. If you experience problems or need more information, see the Summit Z3-16 User Manual on the PETracer Installation CD or at the Teledyne LeCroy web site. Please see the Readme file on the installation CD for the latest software version and for host machine requirements.
PAGE 2
4 Exerciser Card - Front Power Socket: For the 12 V DC Power Adapter USB Type B Host Machine Connector: Links an Exerciser to the host machine for the purpose of downloading scripts and controlling the behavior of the Exerciser. Note: Use either USB or Ethernet, not both. Ethernet Port: GIGE Connectivity allows connection to an Ethernet network and sharing of Analyzer/Exerciser resources by multiple engineers. Note: Use either USB or Ethernet, not both.
PAGE 3
5 Installing the Software PETracer software operates all of Teledyne LeCroy’s PCI Express protocol Analyzer and Exerciser products: The PETracer software is installed on a Microsoft® Windows®-based host machine and serves as the interface for the Analyzer. Install the PETracer software on the host machine before attaching the Analyzer to the system: 1. Insert the CD into the CD ROM drive of the host machine that will control the Analyzer.
PAGE 4
Using a USB Connection To set up the Exerciser using a USB connection: 1. Install PETracer software on the host machine. 2. Connect the Exerciser to a 100-volt to 240-volt, 50 Hz to 60 Hz, 120 W power outlet using the provided power cord. 3. Connect the USB port to a USB port on the host machine using a USB cable. 4. Power on the Exerciser by plugging the 12-V DC power cable into the Exerciser Card and then into the PCI Express Test Platform for Summit™ Z3-16 Exerciser with CLKREQ# and SRIS Support.