Integrator's Manual
43
6 USING THE COM1000 WEB INTERFACE
Each COM24 card contains a basic web-based application that provides an easy means to control
and configure the COM1000 system. This tool can be accessed by entering the IP address of one
of the COM24 cards in the system into any web browser‟s address bar or by using the card
discovery tool discussed in Section 5.1.6.
Figure 22 - COM1000 Web Based User Interface Introduction Page
The COM24 card issues a discovery call for all other COM24 cards in the system, and then
populates a table with some basic information on current tuning parameters and RF signal levels.
Once this information is complete, for version ST02.05.05 and later, the Discover Web Page
illustrated in Figure 22 is automatically displayed. For SW versions earlier than ST02.05.05, the
Discover Web Page is reached by clicking the company logo on the Home Page.
6.1 Discovery of COM24 and COM24FLX Cards
Figure 25 is the result obtained after the COM24 web interface‟s home page times out or by