swisherinc.com OWNER’S MANUAL MODEL NO. STARTING SERIAL #: L114-160001 LSRB67522 LSRB87528 Model LSRB67522 shown LOG SPLITTER IMPORTANT Read and follow all Safety Precautions and Instructions before operating this equipment. Rev 14-160 Safety Assembly Operation Service and Adjustment Repair Parts 1602 CORPORATE DRIVE, WARRENSBURG, MISSOURI 64093 PHONE 800-222-8183 FAX 660-747-8650 EMAIL CustomerCare@SwisherInc.
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for the period's shown below beginning from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship.
SAFETY PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. This machine can amputate hands, feet, and throw objects. Failure to observe the following safety instructions could result in serious injury or death.
SAFETY PRECAUTIONS • NEVER operate your splitter near a flame or spark. Hydraulic oil and gasoline are flammable and can explode. • NEVER fill gas tank while the engine is hot or running. Allow the engine to cool before refueling.
TOWING SAFETY • Do not allow persons to ride on splitter. Do not carry any cargo or wood on your splitter. It may fall off and endanger vehicles that are following you. • Be sure support leg is in the travel position and coupling secure. This must also be retracted so not to interfere while towing. Retract support leg by removing pin, pivoting up, and replacing pin. • Never exceed 45 MPH while towing your splitter. Be extra cautious when traveling over rough terrain, especially over railroad tracks.
ASSEMBLY This log splitter has been mostly assembled at the factory. Refer to uncrating and assembly instructions to complete the final assembly step. Refer to the drawings and part lists should it become necessary to disassemble the unit for repair or replacement of parts. Inspect all components for damage. If you believe you have a damaged part please contact customer service immediately at 1-800-222-8183. WARNING: Exercise extreme caution, as parts are very heavy.
OPERATION SPLITTER OPERATION 1. 2. 3. Set up the log splitter in a clear, level area and block the wheels. The suction port on the tank should always be on the lower side of the log splitter. Place a log on the beam, against the foot plate. Make sure the log is securely on the foot plate and up against the beam. Depress the valve lever so that the cylinder will drive the wedge into the log. Extend the cylinder until the log splits or to the end of its stroke.
MAINTENANCE & STORAGE WARNING: DISCONNECT THE SPARK PLUG BEFORE PERFORMING ANY MAINTENANCE. Consult the operating and maintenance instructions of the engine manufacturer for engine care. Always check the oil level of the hydraulic reservoir before operation. Operating without an adequate oil supply will cause severe damage to the pump. Change the hydraulic fluid in the reservoir after every 100 hours of operation. Periodically check that all nuts, bolts, screws, clamps and fittings are tight and secure.
SAFETY DECALS Replace decals immediately if damaged.
PARTS BREAKDOWN ASSEMBLY DETAIL ITEM # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Not Shown Not Shown Not Shown Not Shown Not Shown QTY.
PARTS BREAKDOWN BEAM LATCH DETAIL ITEM # 1 2 3 4 QTY. 1 1 1 1 PART # 18821 18822 18823 NB126 DESCRIPTION PIN - BEAM LATCH SPRING - COMPRESSION WASHER - FLAT, 1/2" SAE PIN - COTTER PUMP DETAIL ITEM # 1 2 3 4 5 6 7 8 QTY. 1 1 4 4 1 1 1 1 PART # 14926 11557 NB596 NB170 NB312 024002 14902 14904 11 DESCRIPTION PUMP - HYDRAULIC, 2 STG 11 GPM CLOCKWISE ELBOW - 90 DEG.
ENGINE DETAIL ITEM # QTY. 1 1 2 3 4 5 6 7 Not Shown Not Shown 3 1 2 1 1 1 1 2 PART # N/A N/A NB170 NB622 NB253 16070 NB312 9030 7414 6FLC DESCRIPTION 6.75 TORQUE ENGINE 8.75 TORQUE ENGINE NUT - SERR FLANGE, 5/16-18 BOLT - SERR FLANGE 5/16-18 X 2 1/4 BOLT - SERR FLANGE, 5/16-18 X 1 1/4 COUPLER - 7/8" SHAFT SCREW - SET, 5/16-18 X 1/2 KEY STOCK - 3/16 X 1 UNDERSIZE VALVE - FUEL SHUT OFF (INLINE) CLAMP - FUEL LINE HOSE; 1/2"OD X .
PARTS BREAKDOWN BEAM DETAIL ITEM # 1 1 2 2 3 3 QTY. 1 1 1 1 1 1 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 2 1 1 1 1 1 1 10 1 1 1 1 1 6 2 2 6 6 PART # 15202TC 14900TC 12352TK 14622TK 7284TK 7354TK 7293 NB642 7291 7288TK 7292 7287TK 7329 7387 12669 NB555 NB121 NB151 NB688 H11 18748 NB643 14619TK 14620TK NB508 NB213Z DESCRIPTION I-BEAM - W6X20; Txt Red (LSRB67522) I-BEAM - W6X20; Txt Red (LSRB87528) WEDGE (LSRB67522) WEDGE (LSRB87528) CYLINDER - 4" (LSRB67522) CYLINDER - 4.
PARTS BREAKDOWN TONGUE DETAIL ITEM # 1 2 3 4 5 6 7 8 9 10 QTY.
PARTS BREAKDOWN VALVE DETAIL ITEM # QTY.
TROUBLESHOOTING Problem Engine fails to start. Engine is hard to start or runs erratic. Cylinder rod will not extend or contract. Cylinder rod is slow or erratic while extending and contracting. Cause 1. Spark plug wire disconnected. 2. Fuel tank not full enough or stale fuel. 3. Throttle control lever not in correct starting position. 4. Choke not in CHOKE position. 5. Engine not primed properly. 6. Fuel valve not ON or blocked fuel line. 7. Faulty spark plug. 1. Spark plug wire loose. Remedy 1.
MAINTENANCE LOG Date of Service Service Performed 17 Notes
SPECIFICATIONS MODEL LSRB67522 Splitting Force Engine Splitting Positions Cylinder Size Pump Pump Specs Valve Drive System Hydraulic System Fluid Capacity Maximum Log length Tire Specs MODEL LSRB87528 22 Tons* 6.75 Torque: 190CC B&S Horizontal and Vertical Ø4" X 24" 2 Stage 11 Gallons Per Minute Auto Return Direct Drive Splitting Force Engine Splitting Positions Cylinder Size Pump Pump Specs Valve Drive System Hydraulic System Fluid Capacity Maximum Log length 11-13 Quarts 25 1/2" 4.00 X 4.
SWISHER HISTORY Back before electricity came to rural Missouri Max Swisher was producing lawn mowers from his mother’s chicken house. Max never liked to mow grass. He installed a gearbox on his family’s lawn mower creating a self-propelled unit. By tying one end of a rope to the mower and the other end to a tree in the center of the yard the mower circled the tree, shortening the rope and guiding the mower in concentric circles. Max enjoyed relaxing under a shade tree while his invention did all the work.
LOG SPLITTER OWNER’S MANUAL HOW TO ORDER REPAIR PARTS: Each Log Splitter has its own serial number. Each engine has its own serial number. MODEL NO. LSRB67522 LSRB87528 All Log Splitter parts listed herein may be ordered directly from Swisher, your nearest Swisher dealer, or from our website. All engine parts may be ordered from the nearest dealer of the engine supplied with your log splitter. Parts subject to change without notice.
