Design Guide

48 | Sub-Zero Customer Care 800.222.7820
Designer Series Refrigeration
W
OPENING WIDTH
H
OPENING
HEIGHT
NOTE: 3
1
/2" (89) finished returns will be visible and should be finished to match cabinetry—
4
1
/2" (114) for outdoor model.
SIDE VIE
W
TOP VIEW
FRONT VIEW
3
/4" (19)
TYPICAL
FRAMED
CABINETRY
W
FILLER
3
1
/2" (89)
FINISHED
RETURN
FRAMELESS
CABINETRY
W
3
/4" (19)
TYPICAL
3
1
/2" (89)
FINISHED
RETURN
25" (635)
OPENING
DEPTH
25
3
/4" (654)
FOR OUTDOOR
MODEL
OPENING DIMENSIONS
COLUMN / TALL W H
18" Column 18" (457) 84" (2134)
24" Column 24" (610) 84" (2134)
30" Column / Tall 30" (762) 84" (2134)
36" Column / Tall 36" (914) 84" (2134)
DRAWER W H
24" Drawer 24" (610) 34⁄" (876)
27" Drawer 27" (686) 34⁄" (876)
30" Drawer 30" (762) 34⁄" (876)
36" Drawer 36" (914) 34⁄" (876)
*For stainless steel side panel accessory, add 1" (25) per panel to
opening width.
The depth of each Designer Series model is 24" (610). Allow
for panel thickness when planning the finished opening
depth. A minimum 3⁄"
(89) finished return is required on
all sides of the opening—4⁄"
(114) for the outdoor model.
Framed cabinets require additional finished filler material
behind the face frame for a proper installation. Refer to the
illustration.
DUAL INSTALLATION
When installing two units side by side in a dual installa-
tion, the opening width is the width of the two units added
together. A dual installation kit is required for this installa-
tion. If a dual installation kit is not specified, a minimum
2"
(51) filler strip is required between the units.
Dual installation kits are available through an authorized
Sub-Zero dealer. For questions regarding the installation,
call Sub-Zero Customer Care at 800-222-7820.
Opening Dimensions
DESIGNER SERIES