Owner manual

ManualsBrandsSteriflow ManualsEquipmentJSHM Series

Steriﬂow by Jordan Valve

3170 Wasson Road • Cincinnati, OH 45209

513.533.5600 • 800.543.7311 • 513.871.0105 (f)

steriﬂow@richardsind.com • www.steriﬂowvalve.com

JSHM Series Hand Metering Valves

Hand metering valve for precise manual control of

Biopharm and Pharmaceutical gas or liquids

The JSHM Series allows precision manual adjustment

of pharmaceutical liquid and gas ows. These valves

are most often used in bio-pharmaceutical and pharma-

ceutical R & D, and clinical and pilot scale production

facilities to manually set precise ows of liquids and gas.

They can also be used for precision xed ow balanc-

ing of small to medium WFI or Clean Steam distribution

loops in large scale manufacturing.

The JSHM is the rst rising stem diaphragm valve

to offer both precision metering capabilities and the

long durability needed for repeated SIP, or continu-

ous clean steam use.

ConstruCtion & Design Features

• Available in both inline and angled body variants

• 316L barstock construction guarantees material

integrity and quality surface nish

• Cv ranges that assure a valve that will t your

application:

1/2" - 3/4": 0 - 0.4; 0 - 0.7; 0 - 1.5

1" - 1-1/2": 0 - 3.5

• Soft seat material for ANSI Class VI shutoff

• Minimal internal volume

• Proprietary Jorlon diaphragm material provides

exceptionally long life

• Top entry design and modular trim facilities ve

minute in-line Cv trim, or diaphragm change outs, or

maintenance

• Zero hold up and gravity draining through the outlet

with valve open in vertical down ow installation, and

separately drainable inlet and outlet with valve open

in horizontal installation

• All designs are CIP and SIP capable

• Can be used on continuous clean steam and on

non-cavitating uids

Sanitary Valves JSHM Series Hand Metering Valves

DoCumentation

The following documentation is shipped with

each order:

• Steriow Unicert

— Certicate of Material Compliance with

MTR's and Traceable Material Heat

Number for body, ferrules and

wetted trim

— Certicate of Compliance to FDA and

USP Class VI

— Certicate of Surface Finish

• Final Test Reports and Certicate of Origin

available upon request at time of order

appliCation

Ideal for bio-pharmaceutical and pharmaceutical

research and production facilities and equipment

for precise, manual clean liquid and gas ow

control.

• WFI, growth media, buffer, solvent and

elution mix

• Clean air N

, CO

, O

, AR

Summary of content (4 pages)

PAGE 1
Hand metering valve for precise manual control of Biopharm and Pharmaceutical gas or liquids The JSHM Series allows precision manual adjustment of pharmaceutical liquid and gas flows. These valves are most often used in bio-pharmaceutical and pharmaceutical R & D, and clinical and pilot scale production facilities to manually set precise flows of liquids and gas. They can also be used for precision fixed flow balancing of small to medium WFI or Clean Steam distribution loops in large scale manufacturing.
PAGE 2
JSHM Series Hand Metering Valves Specifications Sizes: 1/2" (DN15), 3/4" (DN20), 1" (DN25), 1-1/2" (DN40) Pressure at Maximum Temperature • Tube End and Tri-Clamp; 450 psi @ 350°F (31,0 bar @ 177°C) with PEEK seats; 450 psi @ 150°F (30,1 bar @ 66°C) with PTFE seats • NPT: 2,165 psi @ 350°F(149 bar @177°C) with PEEK seats; 3,600 psi @ 150°F (248 bar @ 66°C) with PTFE seats End Connections • Tri-Clamp • Tube weld ends • NPT Soft Seat Materials for ANSI Class VI Shut-off • PTFE to +252°F (122°C) continuous
PAGE 3
JSHM Series Hand Metering Valves Features & Benefits Autoclavable Anodized Aluminum Knob available as cataloged option Fine thread pitch for precision setpoint adjustments Durable, JorlonTM PTFE Diaphragm; FDA/USP Class VI approved. Unsurpassed life ASME A479 316L body, bonnet, and all wetted components ASME BPE SF5, 20Ra µ in (0.
PAGE 4
JSHM Series Hand Metering Valves JSHM/0514 Ordering Schematic Model — Size — Material 1 1&2 JSHM Model J Series Hand Metering Valve 050 075 100 150 Size 1/2" (DN15) 3/4" (DN20) 1" (DN25) 1-1/2" (DN40) 6L Body Material ASTM A479, 316L 1&2 AT AB PT TC TE ZZ Body Feature Angle Body ASME BPE Tri-Clamp Angle Body ASME BPE BWE FNPT ASME BPE Tri-Clamp ASME BPE Tube Weld Non-Standard 3&4 1S 2S 3S 4S ZZ Trim - FDA & USP Class V Cv 0 - 0.4 (1/2" - 3/4" only) Cv 0 - 0.7 (1/2" - 3/4" only) Cv 0 - 1.