USB2VGAE2 Instruction Manual USB to VGA Adapter USB 2.0 to VGA Multi Monitor External Video Adapter *Please ensure that the driver installation is complete prior to the physical installation of the USB 2.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction...................................................................... 1 Packaging Contents.....................................................................1 System Requirements..................................................................1 Installation........................................................................ 2 Driver Installation..........................................................................2 Multiple USB Video Adapter Installation...........
Introduction Packaging Contents • 1 x USB2VGAE2 video adapter • 1 x Driver CD • 1 x Instruction Manual System Requirements • Available USB 2.0 port • Single Video Adapter: CPU: Intel/AMD single core 1.5GHz or higher RAM: 512MB or more • 2-3 Video Adapters: CPU: Intel/AMD single core 2.4GHz or higher RAM: 1GB or more • 4-6 Video Adapters: CPU: Intel/AMD dual core 2.0GHZ or higher RAM: 2GB or more • Microsoft Windows® 2000/XP/Vista/7 (32/64-bit) NOTE: Aero desktop theme not supported.
Installation * Please ensure that the driver installation is complete prior to the physical installation of the USB 2.0 to VGA adapter Driver Installation 1. Insert the Driver CD into your CD/DVD-ROM drive. 2. If the installation program does not begin automatically, locate the Setup.exe application. This file will be located in the root directory of the Driver CD. 3. Executing the Setup.exe application will launch the following screen.
. Once Windows has fully loaded, plug the USB Video Adapter into an available USB 2.0 port of your PC or Notebook. 7. A Hardware Installation Wizard dialog will show up, please select “No, not this time” and click “Next” to continue. 8. Please select “Install the software automatically (Recommended)”. And click ”Next” to continue. 9. Click “Finish” to complete the Hardware Wizard.
3. Connect the USB type A connector on the second USB Video Adapter to an available USB 2.0 port on the host computer. The driver installation will begin automatically. Repeat these steps for each additional USB Video Adapter you wish to install. Once all USB Video Adapters are installed, reboot the computer. After rebooting, you may be prompted to reboot one final time; please do so. Verifying Installation From the main desktop, right-click on “My Computer” (“Computer” in Vista), then select Manage.
Configuring the USB Video Adapter Look for the USB Video Adapter icon ( ) on your Windows Start bar. Right-click this icon to access the variety of functions associated to the adapter. NOTE: The Aero desktop theme is not supported by this adapter, so should be disabled prior to use of the USB Video Adapter. Display ID The USB Video Adapter supports the VESA defined DDC/EDID standard. The utility will show the display device ID whenever it is attached to the USB Video Adapter.
Display Rotation 4 options available: “0°, 90°, 180°, 270° when used with the Extended or Primary display modes. It is a useful function for some rotatable display devices. Display Modes “EXTENDED” DISPLAY MODE (DEFAULT) A default display mode; this feature allows the attached USB Video Adapter enabled display to work as an “Extended” display to the on-board display. The extended working space improves work efficiency.
“PRIMARY” DISPLAY MODE A unique feature to allow the USB Video Adapter to act as the main working display. The USB Video Adapter will work as the main graphics adapter on the system. The on-board display will work as the extended display. Please be advised that some display utilities and drivers that shipped with certain AGP and built-in display adapters may prevent this option from working on some systems.
Multi-Display Control Panel A unique feature to allow quicker and simpler management of a multi-display environment. A series of hotkeys to quickly move the active window or mouse cursor to the desired display (either on-board or each USB Video Adapter). The default setting of the hotkeys can be found in the Hotkey List of “Multi-Display Control Panel”. For example: Ctrl + 2 means: to move the window to Display 2 Display Settings Quick access to the Windows “Display Settings” window.
Specifications Bus Interface USB 2.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
