USB 3.0 SATA or IDE HDD/SSD Dock w/ UASP UNIDOCKU33 *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Product Diagram.......................................................................
Introduction Packaging Contents • 1x Universal Hard Drive Dock • 1x USB 3.0 Cable • 1x IDE 40 to 40 Pin Cable • 1x LP4 Power Cable • 1x 40 Pin + LP4 to 44 Pin IDE Cable • 1x Universal Power Adapter (NA/UK/EU/AUS) • 1x Instruction Manual System Requirements • Computer system with available USB port • 2.5” / 3.
Product Diagram Front View 1. SATA Hard Drive Power button / Power and Activity LED (Button #1) 2. IDE Hard Drive Power button / Power and Activity LED (Button #2) 3. SATA Hard Drive slot (Slot #1) 4. IDE Hard Drive slot (Slot #2) 5. SATA Hard Drive eject button 4 5 3 2 1 Rear View 1. IDE Hard Drive Data Port 2. IDE Hard Drive Power port 3. USB 3.0 port 4.
Docking Station Installation WARNING: Hard drives and docking stations require careful handling. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and docking station with caution. Be sure that you are properly grounded by wearing an anti-static strap when handling computer components or discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds. 1.
IDE Drive Installation 1. Connect the included 40-pin IDE ribbon cable to the IDE connector on the rear of the dock. If using a 2.5in IDE hard drive, connect the 40 to 44-pin IDE cable to the rear of the dock. 2. Connect the included LP4 Molex power cable into the LP4 connector on the rear of the dock. If using the 40 to 44-pin cable, connect the built-in LP4 connector to the connector on the rear of the dock. 3. Connect the IDE hard drive to the ribbon cable and LP4 Molex connector (3.5in only).
If you have a 2.5in IDE drive, disconnect the 44-pin IDE cable from the drive, and disconnect the 40 pin IDE cable and LP4 breakout cable from the docking station. 3. (Only required for SATA drives) Press the eject button for the SATA Hard drive to release the drive from the connector for removal. 4. Carefully grasp the drive and lift it upwards until the bottom of the drive has completely risen above the hard drive slot. 5. Safely and carefully store your drive and any cables in a secure location.
2. A dialog window will automatically appear, asking you to initialize the drive. Depending on the version of Windows, it will give you the option of either creating an “MBR” or “GPT” disk. Note: GPT (GUID partition) is required for drives larger that 2TB but is not compatible with some older operating systems, while MBR is supported by newer and older operating systems. 3.
Mac OS X To safely disconnect the attached drive from the host computer, close any windows listing the contents of the removable drive. Once all windows are closed, click on the USB storage icon on the desktop, and drag it to the Trash Can icon on the desktop. Allow 5 seconds before physically removing the drive from the docking station.
Specifications Host Interface USB 3.0 Host Connectors 1 x USB 3.0 B female Drive Connectors 1 x SATA DATA (7 pin) + Power (15 pin) reciprocal 1x IDE Data (40 pin) + LP4 Power (44 Pin adapter included Maximum Data Transfer Rate USB 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
