User Manual
Instruction Manual
1
Introduction
Packaging Contents
• 1 x SV231DD2DUA or SV431DD2DUA KVM switch
• 4 x foot pads
• 1 x universal power adapter (NA/EU/UK/AU)
• 1 x instruction manual
System Requirements
• DVI enabled computer system/video card
• USB enabled computer system
• DVI enabled display devices (e.g. monitor, projector, TV, etc.)
• A standard 104-key wired USB keyboard
• A standard 3-button wired USB mouse
Installation
NOTE: Prior to the installation, please power o all devices that will be connected to this
system. Ensure that all devices you will connect are properly grounded. Place cables away from
uorescent lights, air conditioners, and machines that are likely to generate electrical noise. If
you experience any problems using a USB KVM switch, the following BIOS setup changes may be
necessary for PC users and not necessary for Mac users:
• Set HALT ON ERROR to ALL BUT KEYBOARD.
• In PNP AND PCI SETUP, set PNP OS INSTALLED to YES and set USB IRQ to ENABLED.
Dierent systems may use dierent naming, so contact your system manufacturer for further
assistance with these settings.