User Manual
Instruction Manual
4
JP2 - Baud Rate Selector - Used to control the baud rate clock input of the UARTs.
There are two positions:
Lo (factory default) - The clock is set to 1.8432MHz, with a maximum baud rate of
115.2Kbps.
Hi - The clock is set to 14.7456MHz, with a maximum baud rate of 921.6Kbps. Please
see the section entitled Conguration for more information.
Baud Rate Clock
set to1.8432MHz
(Low Speed)
Baud Rate
Clock set to
14.7456MHz
(High Speed)