Manual
Instruction Manual
1
Introduction
Thank you for purchasing a StarTech.com PEX1S952/PEX2S952 Dual
Profile PCI Express 16C950 UART Serial Card. This dual profile Serial
card converts a PCI Express slot into two available RS-232 (DB9) serial
connections, while relying on a native, single-chip design for optimal
performance and reliability.
Features
128-byte deep FIFO per transmitter and receiver •
Automated in-band software flow control using programmable Xon/Xoff •
in both directions
Automated out-of-band hardware flow control using Tx/Rx/RTS/CTS/ •
DSR/DTR/DCD/RI/GND
Compliant with IEEE1284, SPP/EPP/ECP parallel port •
Compliant with PCI Express base specifications revision 1.0a •
High Performance Dual Channel Oxford 950 UART •
Native single-Chip, single lane PCI Express •
Selectable power output on pin 9 for the serial port •
Two high speed RS-232 serial ports with data transfer rate up to 460.8 •
Kbps
Package Contents
1 X Serial Card •
1 X Driver CD •
1 X Instruction Manual •
1 X Low Profile Bracket•