Instruction manual

Instruction Manual

Direct Connect

Installing the USB2G4LEXT2 as Direct Connect

Requirements

To complete the installation, you will also require the following items that are not

included with the product:

• USB compatible computer (host computer) with a USB compliant operating system

• USB compatible device(s)

• One or Two Cat 5e (or better) cables

Preparing Your Site

Before you can install the USB2G4LEXT2, you need to prepare your site:

1. Place the computer where desired and set it up.

2. Ensure that where you want to locate the USB device(s) is within 100m (300ft) of the

computer. If not, adjust the location of the devices and/or computer accordingly.

Installing the Local Extender

1. Place the Local Extender near the computer.

2. Connect the provided USB cable between the Local Extender’s host port and a USB

port on the host computer.