User Manual

Transient Designer

™

Plug-in

Control Elements

Output Gain

The OUTPUT GAIN control allows you to reduce the out-

put signal by up to -22dB or boost it by up to +6dB. This

ensures that following devices receive an optimized

level. The center position at 12-o‘clock equals 0 dB out-

put. If the OVL-LEDs keeps flashing reduce the Output

Level to avoid internal clipping.

Power LED

With a click on the POWER LED you can turn the

Transient Designer™ on or off. The POWER LED is illuminated when

the plug-in is activated. You can also click the ON button to acti-

vate or bypass the Transient Designer.

Signal LED

The SIG. LED indicates that an audio signal reaches the input. In the

analog world this LED helps the operator especially in complex set-

ups to determine immediately whether the Transient Designer™

actually receives any signal. In the digital domain it simply tells you

that the channel where you inserted the plug contains a signal that

is loud enough to ensure correct processing.

Overload LED

The OVL LED indicates internal clipping. Wether the clipping is

audible or not depends on the kind of audio material you are pro-

cessing. Nevertheless it should be avoided that the OVL LED illumi-

nates. Use the Output Gain control to reduce the output level if the

OVL-LEDs keeps flashing.