Intensifier Series Camera HT - INTB8/9/10 Please read this manual throughly before operation and keep it handy for further reference.
CONTENTS Package Contents P3 Precautions P4 O S D Menu P5 Operating Your Camera P6 MENU SET UP P6 LENS SET UP SHUTTER SPEED MANUAL ELC BLC P7 P9 P10 P11 P12 P13 AGC WHITE BAL. SLC P14 P16 P17 P18 P19 INTENSIFIER NEXT CAMERA TITLE COLOR P21 SYNC P22 P23 P25 P27 MOTION DET.
PACKAGE CONTENTS Please make up sure that the following items are included in the package: 1 1 HT - INTB CAMERA HT - INTB8 CAMERA 1 SUNSHIELD 4 MOUNTING SCREW 1 MOUNTING BASE 1 L - WRENCH 1 USER'S MANUAL 1 VIDEO TEST CABLE 1 POWER PIGTAIL 3
PRECAUTIONS TO PREVENT A FIRE OR ELECTRONICAL HAZARD PLEASE USE PROPER POWER CABLE INSTALLATION SHOULD BE PERFORMED BY QUALIFIED PERSONNEL PLEASE USE A UL APPROVED REGULATED 24 VOLT AC OR 12 VOLT DC POWER SUPPLY PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE TO PREVENT FIRE OR ELECTRICAL SHOCK. PLEASE INSURE THAT YOUR INSTALLATION AREA CAN SUPPORT THE WEIGHT OF THE CAMERA PLEASE HANDLE THIS CAMERA CAREFULLY: - DON'T USE A STRONG OR ABRASIVE DETERGENT WHEN CLEANING THE CAMERA.
OSD MENU ◈ Function SET UP MENU LENS OPTION ● DC ● MANUAL SHUTTER ● OFF ● F/L ● MANUAL WHITE BALANCE ● ATW ● AWC ● MANUAL SLC - ( Speco Light Compensation ) ● OFF ● LOW ● MIDDLE ● HIGH AUTO GAIN ● OFF ● LOW ● MIDDLE ● HIGH REDUCE NOISE ● OFF ● LOW ● MIDDLE ● HIGH INTENSIFIER ● AUTO ● OFF NEXT PAGE ● CAMERA TITLE ● DAY/ NIGHT ● SYNC ● MOTION ● PRIVACY ● REVERSE ● DETAIL ● DEFAULT ● PAGE1 EXIT 5
MENU SET UP Menu is adjusted by the OSD button on the camera 1. Press the SET button to access the SETUP mode. ● SETUP menu should be displayed on the monitor screen. SPECO TECH LENS TYPE DC IRIS SHUTTER SPEED MANUAL WHITE BAL ATW SLC HIGH AUTO GAIN OFF REDUCE NOISE ----- INTENSIFIER ----- NEXT PAGE EXIT 2. Select the desired feature using the UP or DOWN buttons ● Move the arrow indicator UP or Down to indicate onto desired feature by pressing the UP or Down button.
3. MENU SETUP change by using button ● Available value or status should be displayed by pressing the Left or Right button. ● Please press the button until desired features appears. 4. When adjustment is completed, move the arrow indicator to " EXIT " and press the "SET" button. CAUTION Access to submenu by moving arrow to desired feature Access is not available to submenu on the mode of " -----". LENS SETUP Select the lens by pressing the RIGHT button 1.
LENS SETUP 2. Select the desired lens type by LEFT or RIGHT button. SPECO TECH LENS TYPE DC IRIS SHUTTER SPEED ELC WHITE BAL ATW SLC HIGH AUTO GAIN OFF REDUCE NOISE ----- INTENSIFIER ----- NEXT PAGE EXIT DC / VIDEO : DC Auto IRIS Lens CAUTION You can control the brightness when DC is selected, Brightness control range will be 1~70.
SHUTTER SPEED CONTROL You can control brightness of screen by the shutter speed. ① Press the SET button to display the setup menu and move the arrow indicator to " SHUTTER " by the UP or DOWN button.
MANUAL When setting the shutter speed manually, You can select from " 1/60 " to " 1/200,000" sec SPECO TECH LENS TYPE MANUAL SHUTTER SPEED MANUAL WHITE BAL ATW SLC HIGH AUTO GAIN OFF REDUCE NOISE ----- INTENSIFIER ----- NEXT PAGE EXIT SHUTTER TYPE MANUAL 1/60 Press SET to Return 10
ELC You can control the BRIGHTNESS. SPECO TECH LENS TYPE MANUAL SHUTTER SPEED ELC WHITE BAL ATW SLC HIGH AUTO GAIN OFF REDUCE NOISE ----- INTENSIFIER ----- NEXT PAGE EXIT Brightness BRIGHTNESS I I I 35 Press SET to Return ③ When completed, press " SET " CAUTION CAUTION Avoid pointing the camera directly at a fluorescent lamp. When the SUTTER menu is set to FLK mode, the INTENSIFIER will not work.
BLC( Back Light ) 3) SLC ( Speco Light Compensation ) A built - in SR chip provides intelligent light level control to overcome severe Backlight conditions. ① Press the SET button to display the SETUP menu and move the arrow indicator to " SLC " by the UP or DOWN button. ② SET " SLC " to desired mode by the LEFT or RIGHT button.
AGC(Auto Gain 4) AGC ( Auto Gain Control ) AGC allows a brighter picture in low light conditions. Higher GAIN level will yield a brighter screen, but you might notice an increase in noise. ① Press the SET button to display the SETUP menu and move the arrow indicator to " SLC " by the UP or DOWN button. ② SET " SLC " to desired mode by the LEFT or RIGHT button.
WHITE BAL. 5) WHITE BALANCE ① Press the SET button to display the SETUP menu and move the arrow indicator to " WHITE BALANCE " by the UP or DOWN button. ② SET " WHITE BAL " to desired mode by the LEFT or RIGHT button. SPECO TECH LENS TYPE DC SHUTTER SPEED WHITE BAL AWC SLC HIGH AUTO GAIN OFF REDUCE NOISE ----- INTENSIFIER ----- NEXT PAGE EXIT ATW(Auto Tracking White Balance) : When color temperature is 2400 ~ 12000K, select this mode. (ex.
WHITE BAL. MANUAL : To fine adjust, select the manual mode. You can increase the red or blue factor while monitoring the difference on the screen. Set the "MANUAL" mode and press the SET button. Increase or decrease the value for RED(R-Gain) and BLUE(B-Gain), watching the color of the picture and press the SET button when you obtain the best color. CAUTION Proper White Balance may not be obtained under the following conditions. in these case, select the AWC mode.
DNR 6) REDUCE NOISE ( Digital Noise Redution ) DNR reduce the video noise on the screen. ① Press the SET button to display the SETUP menu and move the arrow indicator to " REDUCE NOISE " by the UP or DOWN button. ② SET " REDUCE NOISE " to desired mode by the LEFT or RIGHT button.
INTENSIFIER 7) INTENSIFIER Allows you to get clear images with this function under night or low light conditions. ① Press the SET button to display the SETUP menu and move the arrow indicator to " INTENSIFIER " by the UP or DOWN button. ② SET " INTENSIFIER " to desired mode by the LEFT or RIGHT button. SPECO TECH LENS TYPE DC SHUTTER TYPE WHITE BAL AWC SLC HIGH AUTO GAIN OFF REDUCE NOISE INTENSIFIER NEXT PAGE EXIT AUTO : When your camera is under night or low light conditions, select this mode.
NEXT PAGE 8) NEXT PAGE ① Press the SET button to display the SETUP menu and move the arrow indicator to " NEXT PAGE " by the UP or DOWN button. ② SET " NEXT PAGE " to desired mode by the LEFT or RIGHT button. SPECO TECH LENS TYPE DC SHUTTER TYPE WHITE BAL AWC SLC HIGH AUTO GAIN OFF REDUCE NOISE INTENSIFIER NEXT PAGE EXIT 1) CAMERA TILTE ① Press the SET button to display the SETUP menu and move the arrow indicator to " CAMERA TITLE " by the UP or DOWN button.
CAMERA TITLE NEXT PAGE CAMERA TITLE ON DAY / NIGHT SYNC INT MOTION OFF PRIVACY OFF REVERSE OFF DETAIL ON DEFAULT PAGE 1 ③ Press SET button to access the SETUP mode. ④ You can enter up to 15 characters. Ⓐ Move the cursor to character-enter location by using LEFT or RIGHT button. Ⓑ Select the desired character by using UP or DOWN button. Ⓒ Press the SET button to confirm the blinking charactor. The first character is saved and the cursor in the bottom of the screen moves to the next position.
CAMERA TITLE ⓓ Repeat above steps until you creat the full name you want. ⓔ Select the position at which the CAMERA TITLE will be located on the screen. - Move the cursor to "POS" and press SET button. - Select the position by using the 4-directional buttons, then press the SET button to confirm the position. ⓕ When completed, move the cursor to "END" and press SET button.
COLOR 2) COLOR ① Press the SET button to display the SETUP menu and move the arrow indicator to " COLOR " by the UP or DOWN button. ② SET " COLOR " to desired mode by the LEFT or RIGHT button. NEXT PAGE CAMERA TITLE ON DAY / NIGHT SYNC INT MOTION OFF PRIVACY OFF REVERSE OFF DETAIL ON DEFAULT PAGE 1 COLOR : The camera will always display a color picture AUTO : The camera will switch Into B/W in the low light conditions.
SYNC 3) SYNC ① Press the SET button to display the SETUP menu and move the arrow indicator to " SYNC " by the UP or DOWN button. ② SET to desired mode by the LEFT or RIGHT button. NEXT PAGE CAMERA TITLE ON DAY / NIGHT SYNC INT MOTION OFF PRIVACY OFF REVERSE OFF DETAIL ON DEFAULT PAGE 1 INT : Internal synchronization L/L : If you choose "L/L", you can adjust the desired phase. - Press the SET button. - You can adjust the desired phase from 0 to 270.
MOTION DETECTION 4) Whenever your camera detects motion, The words "motion detected" will appear on the screen. ① Press the SET button to display the SETUP menu and move the arrow indicator to " MOTION " by the UP or DOWN button. ② SET " MOTION" to desired mode by the LEFT or RIGHT button.
MOTION DETECTION OFF : Deactivation ON : Activated - Press the SET button. - Move the arrow indicator to " AREA SET " using UP and DOWN button. And then press the SET button. - Set the areas you want to observe. MOTION AREA SEL AREA1 AREA STATE ON TOP l l l 10 DOWN l l l 25 LEFT l l l 20 RIGHT l l l 40 Press SET to Return 6 18 13 5 Max. Min.
PRIVACY 5) PRIVACY: To make an area that you want to be private. ① Press the SET button to display the SETUP menu and move the arrow indicator to " PRIVACY " by the UP or DOWN button. ② SET " PRIVACY " to desired mode by the LEFT or RIGHT button.
PRIVACY NEXT PAGE CAMERA TITLE ON DAY / NIGHT SYNC INT MOTION ON PRIVACY ON REVERSE OFF DETAIL ON DEFAULT PAGE 1 OFF : Deactivation ON : Activated - Press the SET button. - Move the arrow to the area you want to mask. - Set "ON" using LEFT or RIGHT button. - Press the SET button and then set the area's bounds as for MOTION detection.
REVERSE 6) REVERSE: ① Press the SET button to display the SETUP menu and move the arrow indicator to " REVERSE " by the UP or DOWN button. ② SET " REVERSE " to desired mode by the LEFT or RIGHT button. NEXT PAGE CAMERA TITLE ON DAY / NIGHT SYNC INT MOTION ON PRIVACY OFF REVERSE ON DETAIL ON DEFAULT PAGE 1 OFF : Deactivation ON : Reverse the Image RIGHT or LEFT such as mirror.
DETAIL 7) DETAIL: ① Press the SET button to display the SETUP menu and move the arrow indicator to " DETAIL " by the UP or DOWN button. ② SET " DETAIL " to desired mode by the LEFT or RIGHT button.
DETAIL OFF : Deactivation ON : DETAIL control mode ( level 0 ~ 31 ) When the level is up, the sharpness will increase. Control this level to get your best picture quality. If the level is to high, you can get an unnatural image. RESET / RETURN 8) DEFAULT : Use to reset your camera to FACTORY DEFAULT setting. 9) PAGE 1: Save the setting of NEXT PAGE function and then move to SETUP menu.
TROUBLE SHOOTING If you have trouble when operating your camera, please check the following PROBLEM SOLUTION ● Check the power cable and line connection Nothing appears on the screen Between the camera and monitor. ● Check that you have properly connected the VIDEO cables ● Is the camera lens stained with dirt? Clean the lens with a soft and clean cloth. The image on the screen is dim. ● Adjust the monitor as required. ● If the camera is exposed to very strong light, Change the camera position.
TROUBLE SHOOTING If you have trouble when operating your camera, please check the following PROBLEM The color of the picture is not matched. The image on the screen flickers. L/L mode isn't able to be selected. SOLUTION ● Check that you have properly set the "WHITEBAL" menu ● Is the camera facing direct sunlight or fluorecent lighting? Change the camera position. ● Have you connected the camera to DC power source? Connect it to AC power source.
SPECIFICATION LOW LIGHT INTENSIFIER / BUILT IN - SELECTABLE TO 128 X MODEL HT - INTB8 Image Pick-Up Device 1/3" SONY SUPER HAD CCD - 410K TV System NTSC Total Pixels NTSC = 811(H) * 508(V) Effective Pixels NTSC = 768(H) * 494(V) Scanning Frequency NTSC = 15.734KHz(H) / 59.94Hz(V) Scanning System 2:1 Interlaced Synchronization Internal / Line Lock Resolution 560 TV Lines Minimum Illumination 0.
* Settings can be made using the 5 buttons on the front of the camera.
HOW TO INSTALL Dimension & Installation How to install Camera adjustment 34
WARRANTY LIMITED WARRANTY VIDEO CAMERA MONITOR IR LEDs Time Labse VCR Drum Assembly & Heads DVRs TN, TT,TS, PC Series AUDIO 5 Years 1 Year 90 Days 1 Year 3 Years In Door Speaker Out Door / Weatherproof Speaker Amplifiers PA Horns, Micro Phones, Metal Detectors, Volume Controls Megaphones Electrical Equipment, Not Listed Above & Balance of Line 15 Years 2 Years 5 Years 2 Years 90 Days 90 Days Warranty We warranty all products to be free from any manufacturing or material defects.
MEMO 36
MEMO 37
MEMO 38
