ORIGINAL INSTRUCTION MANUAL 550W Electric Hedge Trimmer HTEG48C-510 Important - Please read these instructions fully before starting assembly These instructions contain important information that will help you get the best from your trimmer, ensuring it is assembled correctly and safely.
SPEAR & JACKSON SINCE 1760 For more than 250 years gardeners have enjoyed high quality performance and great results using Spear & Jackson tools. Our garden power tools combine continuous innovation and the latest in manufacturing technologies with a proud heritage. Each product is carefully designed with performance, comfort and durability firmly in mind, which has earned Spear & Jackson an enviable reputation as a maker of tools to trust.
CONTENTS Safety Information 04 Description of symbols General safety Personal safety Operational safety Maintenance and storage safety Intended use 04 05 07 08 10 11 In The Box Assemble 12 12 Unpacking Blade sheath Connection to the power supply 13 13 14 Operate 15 General operate Remove the blade sheath Switching on/off Trimming times Trimming 15 15 16 16 16 Maintenance 18 General cleaning Cleaning the blades Repair Storage Transportation Recycling and disposal 18 19 19 20 20 20 Technical D
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine DESCRIPTION OF SYMBOLS The following warning symbols appear throughout this manual and indicate the appropriate safety measures you should take when operating and maintaining the hedge trimmer. IMPORTANT! Please read all of the safety and operating instructions carefully before using this tool. WARNING! This is a warning symbol.
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine GENERAL SAFETY IMPORTANT! ■ Keep this instruction manual in a safe place for future reference. ■ Read the instructions carefully. Be familiar with the controls and the proper use of the equipment. ■ Never allow children or people unfamiliar with these instructions to use the hedge trimmer. Local regulations can restrict the age of the operator.
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine ■ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical safety ■ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine The correct power tool will do the job better and more safely when operated at the rate for which it was designed. ■ Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine power tools with your finger on the switch or energising power tools that have the switch on invites accidents. ■ Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. ■ Do not overreach. Keep proper footing and balance at all times.
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine shields in place. ■Keep hands and feet away from the cutting attachment at all times and especially when switching on the motor. ■Before use check the controls and correct operation of the product. ■Before using the product or after any impact, check for signs of wear or damage and repair as necessary. ■Always disconnect the product from the power supply (i.e.
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. ■Do not use the product if the cord is damaged or worn. ■Warning! The cutting elements continue to move after the product is switched off. ■Keep the extension cord away from the blades at all times. ■Only use an extension cord with conductors of not less than 1.5mm² or 2.
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine product out of the reach of children. ■ Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. ■ Keep cutting tools sharp and clean.
IN THE BOX PARTS 1 2 3 4 5 6 7 Cutting blades Front guard Front handle Safety switch Air vent Rear handle On/off switch 8 9 10 Power cord with plug Cord strain relief Blade sheath 6 4 5 7 3 2 9 8 1 10 If there are any parts missing, please call the customer helpline on 0345 605 2067 12 AFTER SALES SUPPORT 0345 605 2067
ASSEMBLE 1 Unpacking i. Unpack all parts and lay them on a flat, stable surface. ii. Make sure all parts and accessories are included and undamaged. If you find that parts are missing or show damage please contact the after sales service at 0345 605 2067. Use of an incomplete or damaged product represents a hazard to people and property. iii. Ensure that you have all the accessories and tools needed for assembly and operation. This also includes suitable personal protective equipment (PPE).
ASSEMBLE 3 Connection to the power supply i. Double the cord, about a foot from the end. Lead the loop through the hole on the rear safe guard and hook the loop over the cord strain relief (9). Gently pull on the cord to ensure that it is firmly attached. 9 ii. Connect the plug of the cable to the mains socket.
OPERATE GENERAL OPERATE ■ ■ ■ ■ ■ ■ Check the product, its power cord and plug as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. Double check that accessories or cutting device are properly fixed. Always hold the product by its handles. Keep the handles dry to ensure safe support. Ensure that the air vents are always unobstructed and clear. Clean them if necessary with a soft brush.
OPERATE Switching on/off i. Hold the product with one hand at the rear handle (6) and with the other at the front handle (3). 6 4 7 ii. Press the on/off switch (7) and the safety switch (4) at the same time to switch the product on. iii. Release either the on/off switch (7) or the safety switch (4) to switch the product off.
OPERATE v. First cut both sides from the bottom cutting upwards to the top. This will prevent any of the trimmings falling into the path of the area still to be cut. vi. After cutting the sides proceed to the top. Try to keep the cutting device angled at approximately 15° to the cutting surface. 15° vii. Cut in a number of stages if the area being cut is particularly long to achieve a better result; smaller trimmings will allow for easy composting.
MAINTENANCE WARNING! Always switch the product off, disconnect it from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! ■ ■ ■ Regular and proper cleaning will help ensure safe use and prolong the life of the product. Inspect the product before each use for worn and damaged parts. Do not operate it if you find broken and worn parts. Lubricate the internal surfaces of the blades with gear grease after each use. General cleaning i.
MAINTENANCE Cleaning the blades WARNING! Wear safety gloves when working on blades and close to it! Use appropriate tools to remove debris, e.g. a brush or wooden stick! Never use your bare hands! Always use original spare parts for replacement. i. Keep the blades (1) clean and free of debris. Remove trimmings. ii. Apply a small amount of suitable lubricant, like gear grease, on the cutting device (1) to retain a good cutting performance.
MAINTENANCE Storage i. Clean the product as described above. ii. Attach the blade sheath. iii. Store the product and its accessories in a dry, frost-free place. iv. Always store the product in a place that is inaccessible to children. The ideal storage temperature is between 10 - 30°C. v. We recommend using the original package for storage or covering the product with a suitable cloth or enclosure to protect it against dust. Transportation i. Switch the product off and disconnect from power supply. ii.
TECHNICAL DATA Model Input voltage rating Input power Max. cutting length HTEG48C-510 230-240V ~,50Hz 550W 450mm Max. cutting capacity 20mm Safety class class II Weight 3.35kg Part number Accessories HT550-01 Blade sheath Measured sound pressure level: LpA:89dB(A), K=3dB(A) Measured sound power level: LwA:102 dB(A), K=3dB(A) Guaranteed sound power level: LwA:102dB(A) Vibration values: Hand arm vibration ah: 4.5 m/s2 Uncertainty K: 1.
TROUBLESHOOTING Suspected malfunctions are often due to issues that the user can fix themselves. Therefore, check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed by an authorised service centre or a similarly qualified specialist if you cannot solve the problem yourself! Problem Possible Cause Solution 1.
WARRANTY If your device develops a fault, please don’t hesitate to contact our customer service department on 0345 605 2067, we can solve 80% of problems via the phone. 1. These warranty terms cover additional warranty rights and do not affect your statutory warranty rights. All our products are covered by a 3 year manufacturer warranty. 2. Claims must be accompanied by Proof of Purchase.
AFTER SALES SUPPORT 0345 605 2067
