Manual
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the device.
If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. DO NOT attempt to repair the product yourself. Safe operation can no
longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stress.
5.5 Connected devices
Always observe the safety information and operating instructions of any other devices
which are connected to the product.
5.6 (Rechargeable) batteries
Pay attention to correct polarity when inserting the batteries.
If you do not plan to use the product for an extended period, remove the batteries to prevent
damage from leaking. Leaking or damaged batteries may cause acid burns if they come
into contact with your skin. Always use suitable protective gloves when handling damaged
batteries.
Batteries must be kept out of reach of children. Do not leave batteries lying around, as there
is risk that children or pets may swallow them.
All batteries should be replaced at the same time. Mixing old and new batteries in the
device can lead to battery leakage and device damage.
Batteries must not be dismantled, short-circuited or thrown into open ames. Never attempt
to recharge non-rechargeable batteries. This may cause an explosion!
6 Overview of product
1
2
5
34
1 USB Type-C
®
input
2 Selection button
3 HDMI output
4 Infrared sensor for remote control signal
5 HDMI inputs
Operating instructions
SP-HSW-231 8K 2-Port HDMI-Switch
Item no. 2615375
1 Intended use
This product can be used to connect 2 HDMI sources (e.g. Blu-ray player, DVD player or game
console) to an HDMI-enabled playback device (e.g. TV, monitor or projector). You can switch
between the different sources using the selection button on the product or the supplied remote
control. Power is provided via the supplied USB-Type C
®
cable.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must
be avoided under all circumstances.
Using the product for purposes other than those described above may damage the product.
Improper use can cause a short circuit, re or other hazards.
This product complies with statutory, national and European regulations. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company and product names contained herein are trademarks of their respective owners.
All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
USB4
®
, USB Type-C
®
and USB-C
®
are registered trademarks of USB Implementers Forum.
2 Delivery content
Product
USB Type-C
®
cable
Remote control (incl. CR2025 battery)
Operating instructions
3 Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
4 Explanation of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we will assume no liability for any resulting personal injury
or damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General information
This product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. It may become a dangerous
plaything for children.
Should you have any questions or concerns after reading this document, please contact
our technical support or a professional technician.
Maintenance, modications and repairs must be carried out by a technician or a specialist
repair centre.
5.2 Handling
Handle the product carefully. Impact, shocks or a fall even from a low height can damage
the product.
Ensure that the cables are not pinched, kinked or damaged by sharp edges.
Always lay the cables so that nobody can trip over or become entangled in them. This
poses a risk of injury.
5.3 Operating environment
Do not expose the product to any mechanical stress.
Protect the product from extreme temperatures, strong jolts, ammable gases, vapours,
and solvents.
Protect the product from high humidity and moisture.
The product must not be exposed to direct sunlight.
Never switch the device on immediately after taking it from a cold into a warm environment.
This may cause condensation to form, which can destroy the product. Allow the product to
reach room temperature before using it.