Español Português PCI Express / AGP PCI Express / AGP PCI Express-AGP PCI Express - AGPmrh¨f LH¬OjsH G¢g¬ dfVU
Español Português
Español Português
Español Português
Español Português
Español Português
nView has 5 modes : Standard, Clone, Horizontal Span, Vertical Span and Dualview. If the optional connector is connected, you will be able to choose one as Windows default display device. Only if the device is plugged and functional, will you be able to check the selection box. If you plug the connector after windows boots up, click Detect Displays to enable the plugged output device. nView disabled, only one monitor will work.
Español Português
Click Signal Format to select your country and TV system - NTSC or PAL, no SECAM.
Español Português
Español Português
Español Português
Español Português
Español Português
Español Português
Español Português
Español Português
Español Português
For models installed with cable CRT, take SP8834 REV:A2: 2nd CRT (DAC B ) DVI/DVI-I (DAC A) TV-OUT (DAC B ) Description: Cable CRT use the same DAC, so the nView function cannot be used in Windows at the same time, as shown below.
Ú The following are conditions when 2 output functions are connected at the same time: Español Português PS: If DT function boards are to be delivered to the customer, adapters to be converted into CRT through DVI can have the CRT +TV OUT - Show nView function in Windows.
SLI function will be enabled by GF6600 / GF6600LE don’t have hardware (through SLi bridge on M/ SLI Connect B) while Chipset higher than It enables SLI Function by soft6600GT ware driver control Step1.
Step2. After install driver , You Can Click “ SLI multi-GPU “ Español Português Step3.
Step4. restart your computer Step5.
Español Português
Español Português
Español Português