BWA15AA003 Bluetooth® Headset User manual -1-
1. Notice Before Using Thank you for purchasing the Bluetooth® Headset BWA15AA003. Please read this User's Manual completely before you use the Headset. BWA15AA003 designed for listening the high quality music wirelessly that based on the latest Bluetooth® wireless technology, it is built‐in MP3, AAC and apt‐X low latency codec for high quality audio streaming.
. Package Contents List Please inspect this package and refer to the package contents list below to verify all items were included in this package: 1) BWA15AA003 Bluetooth® headset(1) 2) USB Charging Cable(1) 3) User's Manual(1) 4) AUX Cable 4. BWA15AA003 Bluetooth® Headset Overview ① Answer ② Indicator LED ③ Next Track / Volume + ④ Previous Track / Volume – ⑤ Charging Port ⑥ AUX IN port ⑦ Microphone 5. Battery information The device is equipped with an integrated lithium‐polymer battery.
cannot be replaced. Do not attempt to remove the battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two or three complete charging‐discharging cycles. The battery can be charged and discharged several hundred times, but it loses its capacity over time. Disconnect the BWA15AA003 from the power supply as soon as the battery is fully charged, overcharging would reduce the service life of the battery.
NOTE: ‐ For first time use, please charge the headset fully. ‐ The fully charged battery has power for up to 5 hours of talk‐time and 4hours music playing time, and up to 240 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth® devices, usage settings, usage styles, and environments.
enabled mobile phone. Pairing is a one‐time process and required only for the first connection with the Mobile phone. The BWA15AA003 can be connected with two mobile phones simultaneously. 1) 2) 3) 4) 5) Keep the BWA15AA003 within 1 meter range of a Bluetooth®‐ready Mobile phone. Press and hold the ANSWER button for about 4 s, the indicator light will flashes red and blue intermittently, the device is now in pairing mode.
Otherwise, you can connect the headset on the cellphone manually. 8. Turning headset on /off Turn on your headset Slide the ANSWER button to On to turn on your headset. If your headset has completed the pairing process successfully, when the headset is turned on, it will connect to the phone you last connected automatically. Please ensure your phone's Bluetooth® function is active. Turn off the headset Slide the ANSWER button to Off to turn off the headset.
Note: The BWA15AA003 supports A2DP profile that allows stereo music streaming from a Bluetooth phone. The music will pause automatically while a call is dialed out/incoming, and resume when the call conversation has ended. 10. Using for phone call Last number re‐dialing At standby status, double press the ANSWER, the last number you dialed will be re‐dialed. Note: the last number re‐dialing is available only for the first device if two Mobile phones are connected.
‐ If there is an incoming call while a call is in progress, press ANSWER button shortly to accept the waiting call and end current calling. ‐ If there is an incoming call while a call is in progress, press and hold ANSWER button for 2 seconds to accept the incoming call and place the current call on hold. Note:The same operation could be performed in case of Multi‐connection. Volume adjusting Push toggle switch to increase or decrease volume.
6) 7) 8) 9) Do not place heavy objects on the device. Use only the supplied and approved chargers. Unplug this device when unused for long periods of time or during lightening storms. The battery used in this device may present a risk of fire or chemical burn if mistreated. 10) 12. FCC Statement Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
o radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. 13.
and Switzerland. 14. Warranty The condition of this warranty and supplier's responsibilities under this warranty are as follows: Warranty is non‐transferable and is limited to the original purchaser only. ‐ You must be able to prove the date of original purchase of the unit with a dated receipt. ‐ The warranty is not applicable if the product has been subject to physical abuse, improper installation, modification or repair by an unauthorized third party.
