Datasheet

B
A
8
ABCDEFGH
H G
F
E
D C
1
2
3
4
5
6
7
8 7 6 5 4 3 2 1
A
A B
B
D E
C
G
Part Number
(Note 8)
Male Female
UT00102W2--H-
9/16-24
UNEF Class 2A
23.85 18.26
31.50
11.35 1.60
7.50
UT00103W3--H-
25.50
UT00104--H-
UT001044--H-
11/16-24
UNEF Class 2A
26.20 20.62
UT00128--H-
UT00142G1--H-
13/16-20
UNEF Class 2A
28.60 23.01
32.50
25.50
UT00148--H-
UT001492--H-
1" 3/16-18
UNEF Class 2A
36.55 29.36
34.70 29.30
14.55
2.40
1" 5/16-18
UNEF Class 2A
39.80 31.75
A.8; Validé
CLASSIFICATION : NOT EXPORT CONTROLLED
1 / 2
C001-UT00-AA2
SHEET
SOURIAU DRG N°
FORMAT
This document is the property of
SOURIAU
It must not be reproduced or
communicated without permission
WWW.SOURIAU.COM
NPRDS / PROJECT
UT0
General linear
Tolerances:
0.1
2/1
Scale
UT0 CONNECTOR
TITLE
RECEPTACLE
CUSTOMER DRAWING
20/04/2015Date :COUTY L.Designed by:
MOD N
COUTY L.Latest modification - by:DATEISS
24021
_Cancel & replace UT00-C01
20/04/2015
A
_CREATION OF THE DRAWING
UT00 14 2G1 P W H6 05
Receptacle UT0 :
Type 0
Shell size :
Insert arrangement :
See Note 7
Contact :
P : Male
S : Female
Insert polarisation :
No letter : Standard version
W, X, Y, Z : Differents orientation
Sealing version :
H : IP67 version
H6 : IP68 version
Specification :
No letter : Standard version
05 : O'ring rear on the receptacle
MATERIAL :
Housing : Zinc alloy nickel plated
Insert : PA 66 UL94 V0
Mating gasket : sealing IP67:Nitril
sealing IP68:Silicone
O'ring : nitril
PERFORMANCE CHARACTERISTICS :
Operating temperature : -40 C up to 105 C
Insulation resistance : 5000 M
min
Withstanding voltage: 2000Vrms
(1500 Vrms for 102w2 and 103w3 layouts)
Corrosion salt spray : 96 hours
Durability : 500 matings and unmatings
Sealing IP67 / IP68 3 bar/30min as per IEC60529
Sealing IP69K as per DIN40050
ROHS compliant
NOTES :
-1- Contact identification and orientation of connector, refer to:
UT0-CONTACT-L-C01 (Male)
UT0-CONTACT-L-C02 (Female)
-3- Contact to be ordered separately refer to : UT0 catalog
-4- Dimension P for front panel mounting (see to panel cut out)
-5- Dimension
R for rear panel mounting (see to panel cut out)
-6- To achieved Sealing condition : Add UTFD-- Sealing Gasket
-7- Insert arrangement refer to : UT0-DHP-001-C01 (Male)
UT0-DHP-002-C01 (Female)
-8- This drawing covers p/n termination : -H / -H6 / -H05 / -H605
-9- Packaging: connector is individually packed in a plastic bag
Seal gasket
Insert
Housing
Thread
(for information)
A
0.3 B 0.2
C Max
D 0.2 E 0.35 F 0.15 G 0.2
33.20
3.10
UT00103--H-
UT00124--H-
36.00
UT00147--H-
33.20
31.50
UT001412--H-
25.50UT001619--H-
15/16-20
UNEF Class 2A
31.05 24.61
UT001823--H-
1" 1/16-18
UNEF Class 2A
33.35 26.97
UT002028--H-
UT002030--H-
UT002235--H-
UT002238--H-
UT002448--H-
1" 7/16-18
UNEF Class 2A
42.90 34.92 15.35 3.80
F(4x)
Thread
O'ring
(specification 05 only)
MALE CONNECTOR
PIN (P)
FEMALE CONNECTOR
SOCKET (S)