Use And Care Manual
13
STARTING/STOPPING THE BLOWER (
S e e F i g u r e 4 .
)
• Ensure that the battery is installed in the blow er.
• To start the bloer, press the n/ff Button located on the bloer. ou ill hear to audible
beeps signaling the blow er is active.
• Squeeze the trigger to start the bloer.
• Release the trigger to stop.
ADJUSTING THE AIR VELOCITY (
S e e F i g u r e 5 .
)
• Ensure that bloer is bloer is on. The LED above the n/ff Button ill illuminate.
• Squeeze the trigger to start the bloer.
• Once the blow er is on, pull back the lever clockw ise to increase the speed. This w ill lock the
speed at the desired setting.
• To decrease the speed, push the lever counter clockw ise to decrease the speed to the desired
setting.
NOTE: If you decrease the speed all the w ay, the unit w ill shut of f and step one w ill need to be
repeated.
OPERATING THE BLOWER
• To keep f rom scattering debris, blow around the outer edges of a debris pile. Never blow
directly into the center of a pile.
• To reduce sound levels, limit the number of pieces of equipment used at any one time.
• U se rakes and brooms to loosen debris bef ore blow ing. In dusty conditions, slightly dampen
surf aces w hen w ater is available.
• Conserve w ater by using pow er blow ers instead of hoses f or many law n and garden
applications, including areas such as gutters, screens, patios, grills, porches, and gardens.
• W atch out f or children, pets, open w indow s, or f reshly w ashed cars, and blow debris saf ely
aw ay.
• After using bloers or other equipment, clean up. Dispose of debris properly.
OPERATION
n/ff
Button
Cruise
Control
Lever
Trigger
Fig. 4
Fig. 5
Not
OPERATING THE BLOWER
Not
OPERATING THE BLOWER
To keep f rom scattering debris, blow around the outer edges of a debris pile. Never blow
Not
To keep f rom scattering debris, blow around the outer edges of a debris pile. Never blow
directly into the center of a pile.
Not
directly into the center of a pile.
To reduce sound levels, limit the number of pieces of equipment used at any one time.
Not
To reduce sound levels, limit the number of pieces of equipment used at any one time.
Not
for
for
for
for
for
for
for
Reproduction
Ensure that bloer is bloer is on. The LED above the n/ff Button ill illuminate.
Reproduction
Ensure that bloer is bloer is on. The LED above the n/ff Button ill illuminate.
Once the blow er is on, pull back the lever clockw ise to increase the speed. This w ill lock the
Reproduction
Once the blow er is on, pull back the lever clockw ise to increase the speed. This w ill lock the
To decrease the speed, push the lever counter clockw ise to decrease the speed to the desired
Reproduction
To decrease the speed, push the lever counter clockw ise to decrease the speed to the desired
If you decrease the speed all the w ay, the unit w ill shut of f and step one w ill need to be
Reproduction
If you decrease the speed all the w ay, the unit w ill shut of f and step one w ill need to be
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Reproduction
Cruise
Reproduction
Cruise
Control
Reproduction
Control
Lever
Reproduction
Lever