SIMPLY CLE VER www.skoda-auto.com DX_22-06.indd 1 Radionavigační systém DX Škoda Auto anglicky 05.06 S00.5610.43.20 6Y0 012 151 F ŠkodaAuto RADIO NAVIGATION SYSTEM DX 12.4.
0.book Page 1 Tuesday, December 6, 2005 2:26 PM Introduction You have opted for a Škoda vehicle, which is fitted with a radio navigation system DX, (designated in the following as RNS DX ) - we thank you for your confidence in us. We recommend that you read this Owner's Manual attentively to enable you to become familiar with your RNS DX and all that it offers as quickly as possible.
20.book Page 2 Tuesday, December 6, 2005 2:26 PM 2 Contents Contents Layout of this Owner's Manual (explanations) . . . . . . . . . . . . . . . . . . . 4 General comments ............. Enter destination - To the flagged destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Enter destination - Select destination from the map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 5 Route options . . . . . . . . . . . . . . . . . . . . . . . . . 38 General view . . . . .
20.
20.book Page 4 Tuesday, December 6, 2005 2:26 PM 4 Layout of this Owner's Manual (explanations) Layout of this Owner's Manual (explanations) The Owner's Manual has been systematically designed, in order to make it easy for you to find and absorb the information you require. Chapters, table of contents and subject index The text of the booklet are divided into short sections which are combined into easy-to-read chapters.
20.book Page 5 Tuesday, December 6, 2005 2:26 PM General comments General comments General view Fig. 1 Functional description of the buttons for the operation of audio and navigation functions 1 The button A TIM is designed to retrieve from upto nine automatically stored traffic announcements with maximum four minutes and total 2 A recording period and for activating the recording function as well as aborting a traffic information.
20.book Page 6 Tuesday, December 6, 2005 2:26 PM 6 General comments − Rocker button for automatic and manual station finding 3 A 4 A 5 A 6 A 7 A 8 A 9 A 10 A 11 A 12 A 13 A 14 A 15 A 16 A 17 A 18 A − Rocker button for selecting and repeating recorded radio traffic reports Button INFO displays the complete destination address and repeats the last current voice response if the route guidance function is active. CD - eject button.
20.book Page 7 Tuesday, December 6, 2005 2:26 PM General comments Radio navigation system DX Special equipment Fig. 2 Special equipment The radio navigation system DX offers you an easy handling of the convenience equipment radio and navigation in the vehicle. Additionally the system can be equipped with an original 6-compartment CD changer, a digital sound package, a package for dynamic navigation and a TV/Video module.
20.book Page 8 Tuesday, December 6, 2005 2:26 PM 8 General comments Navigation The navigation system is your “intelligent front passenger”. You can reach the desired destination quickly, easily and reliably without timeconsuming map searching from the starting point of your trip. In unknown locations it saves you time by guiding you to the next filling station. You can make an intermittent stop on the road, in order e.g. to go and eat in a restaurant or to visit a sight.
20.book Page 9 Tuesday, December 6, 2005 2:26 PM General comments “AUX”. More detailed information is available from your Škoda Service Partner. If the information “SAFE” appears in the display after switching on the unit, it can only be operated again by entering the correct code. Operating the radio navigation system when the vehicle is moving.
20.book Page 10 Tuesday, December 6, 2005 2:26 PM 10 General comments Carefully insert the new navigation CD with the inscription upwards as far as possible into the CD case until it can be drawn in automatically by the unit. The display switch over is performed either manually by pressing the 8 or automatically when switching on the car lights.
20.book Page 11 Tuesday, December 6, 2005 2:26 PM General comments The menus displayed on the screen result from the following standard fields: • If the navigation is active the status of the functions radio or CD A . In radio or CD mode, the active changer is displayed in the status bar A function of the navigation is shown here (e. g. “Destination entry is active”).
20.book Page 12 Tuesday, December 6, 2005 2:26 PM 12 General comments tion. You can select via the map type if e.g. the current vehicle position should be shown together with the destination. The move mode makes it possible to view the neighbouring map details. Other symbols can be selected via the map content. The segment fields change the map scale. You can change from the map display to the symbol display with menu field “Symbol”.
20.book Page 13 Tuesday, December 6, 2005 2:26 PM Audio Audio Overview of audio menu Display of audio functions – Change from the navigation display to the audio display with 15 . the button AUDIO A – When the audio display is indicated press the button AUDIO 15 , in order to call up the menu “Select source ”. The selecA tion column indicates the current source of tone.
20.book Page 14 Tuesday, December 6, 2005 2:26 PM 14 Audio RDS Name TIM standby Setting the RDS station name to “fixed” or “variable” (changes in the displays are indicated on the screen, e.g. weather reports or advertisements). Setting the TIM standby time RDS REG Certain programs of the broadcasting companies are divided into regional programs at specific times. That is why in individual regions the regional programs of a station can broadcast different contents.
20.book Page 15 Tuesday, December 6, 2005 2:26 PM Audio Overview of sound menu Call up the menu “Adjust sound” – Press button sound System equipment without digital sound package (DSP) 17 . A Changing scale value – You can mark and confirm the desired menu field (e.g “Treble”) ⇒ fig. 8. Afterwards the selection column changes to the right column. The current setting is shown by a highlighted 18 square. Select the new value by turning the menu knob A and confirm it.
20.book Page 16 Tuesday, December 6, 2005 2:26 PM 16 Audio • • • System equipment with DSP Bass Treble Balance - the volume ratio of the loudspeaker on the right/on the left is adjusted. • • Fader - the front/rear volume ratio is adjusted. Volume setup Adjust volume (menu field “Volume setup”) Fig. 10 Menu - Adjust sound range 17 in a system with a digital sound After pressing the button sound A package (DSP), a menu is called up ⇒ fig. 10 with which you can adjust the sound range.
20.book Page 17 Tuesday, December 6, 2005 2:26 PM Audio Radio mode Station finding Automatic station finding 2 , the station finding starts in the – Touch the rocker button A selected direction, select the first station with a good reception and play it. Manual station finding – Also stations with a weak reception, which are not taken into account by the automatic station finding, can be set with the manual station finding.
20.book Page 18 Tuesday, December 6, 2005 2:26 PM 18 Audio – While the station to be stored is being listened to, the desired 12 must be held as long as possible until a short station button A signal tone confirms the storing. – The program name (RDS station) or the station frequency is shown in the info field after the successful storing. • Stations of a waveband (TP, FM and AM) can be played briefly one after the other (for ten seconds). – Select the desired waveband via “Select source”.
.book Page 19 Tuesday, December 6, 2005 2:26 PM Audio PS-Code (e.g for advertisement purpose ), there is the possibility to change the RDS station name in the menu “Audio Settings ” (call up via menu field “Settings”). Alternative frequencies (AF-Code); The program of a station , e.g. radio 21 emits different frequencies based on the limited range of the ultra short wavebands of several broadcasting stations. The AF-Code communicates to the unit all possible frequencies for the corresponding station.
20.book Page 20 Tuesday, December 6, 2005 2:26 PM 20 Audio • RDS evaluation is not possible if the signal is too weak. In this case it is the frequncy which appears in the status bar or in the info field instead of the RDS station name. • If there are unfavourable reception conditions (e.g. in the mountains) the unit checks very often the alternative frequencies. This can cause brief mutings.
20.book Page 21 Tuesday, December 6, 2005 2:26 PM Audio • Replaying the random traffic report The traffic reports can also be replayed in the random order. • 2 on the left for replaying older traffic report - press the rocker button A two seconds. • replaying latest traffic report - press the rocker button for two seconds. 2 on the right A Fast replay of the traffic reports The beginning is overwritten, if a report lasts more than four minutes.
20.book Page 22 Tuesday, December 6, 2005 2:26 PM 22 Audio – Afterwards the play function starts in the order of the CDs inserted in the magazine. Interrupting the CD play function The play function of a CD is interrupted in the event of a traffic information. At the same time the identification “Info” is indicated in the info field of the CD menu. End CD play function The CD play function is ended when selecting another tone source in the menu “Select source”. The unit changes to radio mode.
20.book Page 23 Tuesday, December 6, 2005 2:26 PM Audio Information on how to use a CD changer CD to jump Uneven road surfaces and strong vibrations may cause the CD to jump. In such cases wait with the CD mode until there is a better road surface to drive on. Formation of condensation When it is cold and after rain showers, moisture can deposit in the CD changer housing (condensation). This can effect the CD jump or impair the play function. In such cases wait until the moisture has dissipated.
20.book Page 24 Tuesday, December 6, 2005 2:26 PM 24 Navigation Navigation Overview of navigation basic menu Call up navigation basic menu • • • • • Info mode ⇒ page 44 Route options ⇒ page 38 Settings ⇒ page 41 Travel guide ⇒ page 52 Note 7 is pressed during the guidance, the menu field If the button NAVI A “Start guidance” appears in the navigation basic menu.. • If the inserted navigation CD does not feature this information, the functions of a travel guide are not offered. Fig.
20.book Page 25 Tuesday, December 6, 2005 2:26 PM Navigation Enter destination Now you can select via the menu fields between the following possibilities of the “Enter destination”: • • • • • • • Overview Destination memory ⇒ fig. 14 Destination on the map ⇒ page 36 Special destinations ⇒ page 30 To the flagged destination ⇒ page 34 Town (and town sub-menu) ⇒ page 27 Street ⇒ page 28 Town centre ⇒ page 29 Destination on map Fig.
20.book Page 26 Tuesday, December 6, 2005 2:26 PM 26 Navigation Therefore ensure that the destination is detected by the navigation system and a route is calculated.
20.book Page 27 Tuesday, December 6, 2005 2:26 PM Navigation Enter destination - Town Enter town name – Enter the desired town completely in the editing field or only its initial letters. An existing entry is deleted when entering the first characters. Simultaneously a new line is stamped into the editing list. Select a town as destination 18 . – To do so mark the desired characters with the menu knob A 18 .
20.book Page 28 Tuesday, December 6, 2005 2:26 PM 28 Navigation Enter destination - Street and Intersection – Scroll through the list by moving the the selection bar over the last entry (scrolling forwards) or the first entry (scrolling backwards). Select a street as destination You can select the desired street in the menu “Street” with the aid of this possibility and then precisely determine the destination address in the street sub-menu.
20.book Page 29 Tuesday, December 6, 2005 2:26 PM Navigation Select an intersection as destination Enter destination - Town centre Select a town centre (part of the town) as destination Fig. 18 Precise definition of the destination address Fig.
20.book Page 30 Tuesday, December 6, 2005 2:26 PM 30 Navigation – Select a list. – Mark and confirm the desired town centre in the list. Then the navigation basic menu is called up. Select menu field “Special destinations” – Mark and confirm in the destination entry menu the menu field “Special destinations”. The menu “Special destinations” is called up. – The guidance can begin ⇒ page 39.
20.book Page 31 Tuesday, December 6, 2005 2:26 PM Navigation Select destination in the address surroundings containing the information for the corresponding destination addresses and destination distances. The destinations in the surroundings of the current address for the selected column are entered in this list. In addition, the distance between the address and the destination is given. The destination entries in the list are sorted according to the distance. Select supraregional destinations Fig.
20.book Page 32 Tuesday, December 6, 2005 2:26 PM 32 Navigation – Mark and confirm the menu field “Supraregional destinations” ⇒ page 31, fig. 22. The column list is called up. – Mark and confirm the desired entry in the column list. The navigation basic menu is called up and the selected destination is in the destination field. This special destination has not been assigned to any previously selected destination. It relates to the immediate surrounding of the current vehicle position.
20.book Page 33 Tuesday, December 6, 2005 2:26 PM Navigation Enter destination - Destination memory Store a destination in the destination memory Select menu field “Store destination” – Confirm the menu field (in case of menu call up, the menu field “Store destination” is already marked) ⇒ fig. 24. Then the editing menu is called up for the entry of a short name. Enter short name – Enter the short name into the editing field (e.g. MEETING POINT 1 ⇒ fig.
20.book Page 34 Tuesday, December 6, 2005 2:26 PM 34 Navigation • Note If an already existing short name is changed (highlighted) it is deleted when entering the first characters. • If the destination memory is full, one or several destinations must be overwritten. In this case a menu is called up after entering the short name, which contains the menu field “Overwrite destination” . The alphabetical destination memory is displayed after confirming the menu field. The 18 .
20.book Page 35 Tuesday, December 6, 2005 2:26 PM Navigation Store flagged destination Take over standard name – Confirm the entry “Flagged destination (hh:mm)” by 18 for more than two seconds. pressing the menu knob A Enter your own position name – Enter a position name with the aid of the register. The standard name is deleted when entering the first characters. 18 for more than – Confirm the entry by pressing the menu knob A two seconds. Fig.
20.book Page 36 Tuesday, December 6, 2005 2:26 PM 36 Navigation – Mark and confirm in the destination entry menu the menu field “To flagged destination”⇒ page 35, fig. 27. The navigation basic menu is called up. In the destination field there is the name “Flagged destination (hh:mm)”. – The guidance can begin ⇒ page 39. 50 km 1 : 5 000 000 100 km 1 : 10 000 000 200 km 1 : 20 000 000 500 km 1 : 50 000 000 The map is aligned to the north.
20.book Page 37 Tuesday, December 6, 2005 2:26 PM Navigation Select functions The map is shown with a crosshair and a selection window. The selection window shows that the current scale is not yet suitable for the destination entry. Simultaneously it shows the map detail which you can zoom into. 18 as often as it is necessary. After the – Press the menu knob A destination confirmation, the navigation basic menu is called up and the name “Map destination (hh:mm)” appears in the destination field.
20.book Page 38 Tuesday, December 6, 2005 2:26 PM 38 Navigation Route options – Mark and confirm the menu field “Route option” in the navigation basic menu. The menu for the route option is called up. Plan route guidance and calculate route list – Select another setting in which first of all the desired menu field is marked and confirmed. The respective current setting is shown by a highlighted triangular with highlighted lettering ⇒ fig. 29.
20.book Page 39 Tuesday, December 6, 2005 2:26 PM Navigation Scroll the route list: • • 18 to the left A 18 to the right to above - turn menu knob A to below - turn menu knob Start guidance Begin guidance To exit the route list: Button • 9 calls up again the menu “Route option”. A Note The function “Dynamisation” is at your disposal if your navigation system is prepared for dynamic navigation.
20.book Page 40 Tuesday, December 6, 2005 2:26 PM 40 Navigation Route calculation In this case follow the display of the direction of travel which points in the direction of the destination. You will obtain acoustic and optical driving recommendations as soon as you are driving on a digitalized street. WARNING For the guidance these are only driving recommendations. The road traffic legislation (StVO) is always applicable, also if a driving recommendation does not comply with the StVO. • Fig.
20.book Page 41 Tuesday, December 6, 2005 2:26 PM Navigation The symbol display ⇒ page 40, fig. 33 shows the number of GPS satellites to be received and the status of the tailback function, the estimated arrival time or the length of the trip and the distance to the destination, the display of the direction of travel, the distance markings to the intersection/junction with the distance information and the name of the currently driven road.
20.book Page 42 Tuesday, December 6, 2005 2:26 PM 42 Navigation • Zoom setting (reduce/enlarge): Note If the segment A has been marked and confirmed, the map is displayed in the auto zoom mode. This means that the map is shown automatically in the correct scale. The correct scale depends on the distance to the next decision point (e.g. turn point) and the driven road category (e.g. motorway). The scale changes depending on the distance to the next decision point ⇒ page 43.
20.book Page 43 Tuesday, December 6, 2005 2:26 PM Navigation Select menu field “Map type” Select menu field“Zoom setting” – Mark and confirm the menu field “Map type”. – Mark and confirm the desired map type in the sub-menu called up below. Then the map is displayed. Location map - Display of the map detail with the current vehicle position. Scale and alignment of the map are not changed. Overview map - Display of the current vehicle position and the destination.
20.book Page 44 Tuesday, December 6, 2005 2:26 PM 44 Navigation The distance information (after the road category) gives the scale in which the map was shown during auto zoom. Note The distance information for the individual road categories is fixed and cannot be changed. Info mode Fig. 37 Symbol display Select menu field “Info mode” – Mark and confirm the menu field “Info mode” in the navigation basic menu ⇒ fig. 36. – Then the symbol display is shown ⇒ fig. 37. In order to change 18 .
20.book Page 45 Tuesday, December 6, 2005 2:26 PM Navigation Destination memory Destination memory - Enter/change short name Overview The destination menu calls up directly from the navigation basic menu via the menu field “Destination memory”. The destination memories are the alphabetical destination memory and the Top 10 memory. The alphabetical destination memory contains all destination memory entries. They are alphabetically classified.
20.book Page 46 Tuesday, December 6, 2005 2:26 PM 46 Navigation – Mark and confirm the menu field “Change short name” in the sub-menu. Edit the Top 10 memory Select list entry – Mark and confirm the desired entry in the respective destination memory list. The editing menu is called up. – Enter the desired short name into the editing menu. An already existing short name is deleted when entering the first characters.
20.book Page 47 Tuesday, December 6, 2005 2:26 PM Navigation Sort Top 10 destination entries – The menu “Edit Top 10” is called up again by pressing the 9 . button A Note The white triangular below the last entry on the first page of the Top 10 list refers to the following page. Copy destination from the destination memory in the Top 10 memory Fig. 40 Sort Top 10 destination entries The menu field “Sort Top 10” ⇒ fig. 40is marked with the selection bar. – Confirm the menu field “Sort Top 10”.
20.book Page 48 Tuesday, December 6, 2005 2:26 PM 48 Navigation Delete a destination from the destination memory You can remove the destinations which are no longer needed from the alphabetical destination memory and the Top 10 memory. First of all call up the respective memory from the destination memory menu. Then the entry to be deleted is selected in the memory. In order to prevent a destination being deleted inadvertently, a confimation is asked for.
20.book Page 49 Tuesday, December 6, 2005 2:26 PM Navigation The traffic reports are shown in the map display by means of symbols: • slow-moving traffic • traffic jam • closed road The corresponding stretch of the journey is shown in the map display by a dotted line. So that you can use the dynamic navigation, a radio station must be able to receive the traffic reports emitted via TMC. The TMC box selects automatically a TMC station; you can also manually select another station. Fig.
20.book Page 50 Tuesday, December 6, 2005 2:26 PM 50 Navigation Switching on and off the dynamic navigation 18 to switch the dynamisation on or off. – Press the menu knob A The active condition is shown as highlighted and marked with a triangular.
20.book Page 51 Tuesday, December 6, 2005 2:26 PM Navigation – Mark and confirm the menu field “Text messages”. – The first traffic report is indicated. Other reports can be 18 . retrieved by pressing the menu knob A The number of received messages is shown in the top bar, e.g. “Traffic info 5/12” means that five of a total of twelve traffic reports are displayed.
20.book Page 52 Tuesday, December 6, 2005 2:26 PM 52 Navigation Exclude alternative route – Press the button tailback function appears. Travel information can be price information, equipment and telephone/fax numbers for hotel arrivals. 16 . The tailback menu A – Mark and confirm the menu field “Delete bypass”. The bypass is excluded and the route is newly calculated. • Note Entered bypass remarks remain stored until the end of the drive or until deletion.
20.book Page 53 Tuesday, December 6, 2005 2:26 PM Navigation In the navigation basic menu you can select various basic settings for the navigation system via the menu field “Settings” ⇒ page 52, fig. 45. Select between the following possibilties: Select language - for the voice response: • • • the clock is automatically set via the GPS.
20.book Page 54 Tuesday, December 6, 2005 2:26 PM 54 Navigation Anti-theft coding Enter code - Cancel electronic lock Description Each time when: • • • the unit is disconnected from the power supply of the vehicle the battery is disconnected the electrical fuse for the radio was blown The information “SAFE” appears in the display after switching on the unit. Then the unit can only be operated again by entering the correct code. Fig.
20.book Page 55 Tuesday, December 6, 2005 2:26 PM Navigation • Note 18 more You can also confirm the code by pressing the menu knob A than two seconds. Entry of an incorrect code number After confirmation of the incorrect code number, the logo “SAFE” flashes in the numerical fields and then indicates also the entered code. The message “1st code entered is wrong!” is below the numerical fields. Now the entire process can be repeated once again.
20.book Page 56 Tuesday, December 6, 2005 2:26 PM 56 TV Tuner * TV Tuner * – If you are in the navigation mode, the button AUDIO be pressed twice. 15 must A Introduction – Select and confirm the menu field “TV/VIDEO”. If the vehicle is stationary you have the possibility with the TV Tuner to receive television programs. The TV picture appears on the screen of the navigation unit. The sound reproduction is performed via the vehicle loudspeakers.
20.book Page 57 Tuesday, December 6, 2005 2:26 PM TV Tuner * • 2nd possibility: 18 to the right (or left), in order to set the – Turn the menu knob A next (or the previous) channel. For information the station and the belonging channel is indicated. The six TV stations can be stored on the station buttons 1 - 6 12 . A 2 or the menu knob A – If the desired station has to be displayed, the desired station button 1 - 6 must be pressed until there is a brief muting and a signal tone cancels the storing.
20.book Page 58 Tuesday, December 6, 2005 2:26 PM 58 TV Tuner * – Press the button setting. 9 , in order to take over the new A – Press the button Select TV standard – Press the menu knob the TV picture. 18 . The operator menu is indicated in A – Select and confirm the menu point “SETTINGS”. The current standard is displayed in the highlighted lettering. – Select and confirm the menu point “Standard”. Now carry out the settings. – Turn the menu button standard.
20.book Page 59 Tuesday, December 6, 2005 2:26 PM Index Index A Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 54 incorrect . . . . . . . . . . . . . . . . . . . . . . . . . . 55 F Anti-theft coding . . . . . . . . . . . . . . . . . . . . . . 54 Copy destination . . . . . . . . . . . . . . . . . . . . . . 47 Flagged destination . . . . . . . . . . . . . . . . . . . . 35 Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Function . . . . . . . . . . . . . . . .
20.book Page 60 Tuesday, December 6, 2005 2:26 PM 60 Index Memory Destination . . . . . . . . . . . . . . . . . . . . . . . 45 Destination- . . . . . . . . . . . . . . . . . . . . 33, 45 Top 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Traffic information . . . . . . . . . . . . . . . . . . 20 Menu for editing . . . . . . . . . . . . . . . . . . . . . . . . 26 Moving -Operating . . . . . . . . . . . . . . . . . . . . . 9 Music braodcasting . . . . . . . . . . . . . . . . . . . .
20.book Page 61 Tuesday, December 6, 2005 2:26 PM Index W Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Z Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Information The unit map must be disconnected and safe - never store in the vehicle. If the unit map with the code number may get lost, please contact your Škoda Service Partner or importer. There one will be glad to assist you without any cost. DX-průkaz.indd 1 Unit name Unit name Radio navigation system DX Serial no. Code no. Please affix serial no. and code no. 6.12.
Information The unit map must be disconnected and safe - never store in the vehicle. If the unit map with the code number may get lost, please contact your Škoda Service Partner or importer. There one will be glad to assist you without any cost. DX-průkaz.indd 2 6.12.
Škoda Auto is constantly working on the further development of all types and models. Please understand that, for this reason, changes to the scope of supply in terms of shape, equipment and engineering may be introduced at any time. It is therefore not possible to derive any claims from the information, illustrations and descriptions contained in this Owner ´s Manual .
SIMPLY CLE VER www.skoda-auto.com DX_22-06.indd 1 Radionavigační systém DX Škoda Auto anglicky 05.06 S00.5610.43.20 6Y0 012 151 F ŠkodaAuto RADIO NAVIGATION SYSTEM DX 12.4.
