SIMPLY CLEVER Infotainment Navigation Amundsen Owner's Manual
Structure of this Owner's Manual (explanations) This Owner's Manual has been systematically designed to make it easy for you to search for and obtain the information you require. At the beginning of this manual you will find a table of contents where all the topics described are arranged sequentially. At the end of this manual you will find an alphabetical index. Direction indications All direction indications such as “left”, “right”, “front”, “rear” relate to the direction of travel of the vehicle.
Preface You have chosen a ŠKODA vehicle, which is fitted with the Infotainment Navigation Amundsen (hereafter called the unit) – we thank you for your confidence in us. The new operating concept allows you to make vehicle settings and to operate electronic systems centrally from the unit. Please read this Owner's Manual carefully, because the operation in accordance with these instructions is a prerequisite for proper use of the unit.
Settings Switch on/off traffic programme TP Digital radio reception DAB Table of Contents Introductory information (familiarisation with the unit) Introductory information Vehicle equipment Safety information Component protection Touch screen Unit overview and operation 3 3 3 3 3 5 Unit menus Main menu 9 9 Unit setup Main menu Sound setup Screen settings Time and date settings Keypad settings Setting more keypad languages Settings for units Settings for voice control Restore factory settings Bluetooth
Component protection Introductory information (familiarisation with the unit) Some electronic control units are factory-equipped with component protection.
To protect the screen, you can use a suitable screen protector for touchpads that does not affect the function of the touch screen. ■ The brightness of the screen is adjusted automatically depending on the brightness of the interior lighting. The automatic setting can be adjusted manual ly » page 11.
Unit overview and operation Unit overview Note ■ Some functions can be operated via the multifunction steering wheel » Vehicle Owner's Manual, chapter Communication or the rocker switch in the multifunction lever » Vehicle Owner's Manual, chapter Instruments and warning lights. ■ Some information and features are shown on the display of the instrument cluster. Switching the unit on/off › Press the knob to switch the unit on or off.
Selecting menu/menu item › Drag your finger over the screen in the required direction › Turn the menu knob 2 » Fig. 1 on page 5 Note ■ ■ The volume change is displayed on the screen of the unit. When the sound is muted, the symbol appears in the display. Screen display and control of the unit Fig. 2 Screen display If you make the selection by turning the menu knob 2 , the currently selected menu is highlighted in green.
■ Sound - Sound setup ■ Volume - Volume setting ■ Bass - Mid - Treble - Sets the bass, mid and treble ■ Balance - Fader - Sets the balance between left and Description of the function keys Button right, front and rear Example menu ■ xyz - the first menu level ■ xyz - the second menu level ■ xyz - the third menu level ■ xyz - the first menu level Input screen with keypad for search Fig.
Input screen with numeric keypad Fig. 5 Input screen with numeric keypad The input screen with keypad is used for number entry » Fig. 5. - Input screen in phone mode » page 27 .
Unit menus Main menu Fig. 6 Unit menus: Main menu First and foremost, pay attention to the safety instructions » page 3. Select and confirm all functions as described at the beginning of this manual » page 5. Call up the main menu › Press the button MENU .
Software: - Software version Navigation database: - Version of the navigation data Copyright info - Information on licences and copyrights used (only displayed in English) ■ ■ Unit setup ■ Main menu Fig. 7 Unit settings: Main menu Sound setup First and foremost, pay attention to the safety instructions » page 3. Select and confirm all functions as described at the beginning of this manual » page 5. Call up the main menu › Press the button SETUP .
- Setting the reduction of the volume when the park distance control is active ■ Off - switches off ■ Weak - weak reduction ■ Medium - medium input sensitivity ■ Strong - strong reduction Bass - Mid - Treble - Sets the bass, mid and treble Balance - Fader - Sets the balance between left and right, front and rear Confirmation tone - Switches confirmation tone on/off by pressing a function surface No navigation sound during call - Switch on/off navigation announcements during a telephone call (using a phone c
■ Distance: - Distance units ■ km - Kilometres ■ mi - Miles ■ Speed: - Speed units ■ km/h - Kilometres per hour ■ mph - Miles per hour ■ Temperature: - Temperature units ■ °C - Degrees Celsius ■ °F - Degrees Fahrenheit ■ Volume: - Volume units ■ l - Litres ■ Voice control session end tone - Switch on/off the audible signal that is output to signal that voice control is waiting for a command ■ Input tone in voice dialogue › Press the button ■ psi units › Press the button Settings for voice control
› Press a button on the unit (with the exception of brief pressing of the button Voice control of the unit VOICE ). › By speaking the voice command Cancel voice control. Introductory information Operation You can use voice control only in phone or navigation mode. Voice control settings » page 12. Voice commands After turning on voice control, a menu with basic voice commands for the given operation is displayed on the screen. You can switch this menu on and off » page 12.
The symbol displayed on the device screen or in the information display changes from to . Restarting voice command input The procedure for voice command input can be restarted in one of the following ways: › by pressing the function key ; › by briefly pressing the button VOICE on the unit; › by briefly pressing the button on the multifunction steering wheel. Voice command not recognised If a voice command is not recognised, the system answers with “Sorry?” and you can give a new command.
Symbols in the display Symbol Audio Radio Sound is muted Traffic information station Main menu Description Station without traffic information Radio station from the station list is a station from the preset list Selected radio station RDS function is switched off Fig. 9 Radio: Main menu Information display The Audio mode menu opens after confirming by Audio in the main menu that is displayed in the information display of the instrument cluster.
› Press and hold the corresponding function key B » Fig. 9 on page 15 until you ■ Traffic programme (TP) - Switches traffic programme on/off ■ Preset list - Deletes the stored stations ■ - Delete a radio station ■ Delete all - Delete all stored stations ■ Station logos - Use the station logo stored on the SD card ■ Radio text - Radio text display on/off hear an acoustic signal or › Press and hold the desired station in the station list. A list of function keys B will be displayed.
Select and confirm all functions as described at the beginning of this manual » page 5. Switch on/off traffic programme TP Call up the main menu Depending on equipment fitted: › Press the button › Press the button TP . RADIO → › Press the button → Traffic programme (TP) . Traffic monitoring is indicated by the letters in the display. While playing in Media mode, the last selected radio station continues to be received in the background if it supports traffic information.
If no station list is available, the device will automatically search for radio stations.
■ Media ■ Main menus ■ Fig. 12 Media: Main menu ■ Data names must be no longer than 256 characters. The directory structure is restricted to a depth of 8 subdirectory levels. An SD memory card must not have more than 5°000°folders and 15°000°files. Thus, one folder cannot have more than 6°000 files. The name of the artist, the album and the title of the played file can be displayed if such information is available as so-called ID3 tags.
Explanation of graphic A Displays the directory structure, function keys of higher-level directories B Function keys for the audio source C Track currently playing Operating audio sources Description of the function keys a) b) c) Button Action Operation / Press Play/Pause: The play function is stopped at the current position and the symbol changes to - after pressing again, the play function will continue from this position Press brieflya) Plays the previous track from the start Press b
Requirements for the functionality › Only standard size audio CDs (CD-DA) and data CDs (CD-R, CD-RW) can be played in the internal CD drive. Mini CDs (∅ 8 cm) cannot be inserted. › CD-ROM, CD-R, CD-RW with a capacity of 650 MB and 700 MB. › The CDs must correspond to the ISO 9660 Level 1 or Level 2 standard as well as the Joliet data system (single and multi-session). › A MP3 CD must not have more than 50°folders and 500°data. › Data names must be no longer than 256 characters.
Memory card empty or data not readable If a memory card is inserted on which no data or no legible data has been stored, the unit will not be switched to the memory card mode after the loading procedure. WARNING Never place external audio sources on the dash panel. They could be thrown into the passenger compartment during sudden driving manoeuvres, injuring the occupants. ■ Never place external audio sources close to the airbags.
› Press the button SETUP → Remove USB device safely . MENU → or › Press the button → Remove USB device safely . Connecting external audio source via Bluetooth® If a connected Bluetooth® device allows, it can be operated from your unit. To activate this function it is necessary for the external audio source to be paired with your unit . The pairing process is identical to that of the mobile phone » page 25.
Possible error messages Phone Message Phone Introductory information The phone menu is only available when the ignition is on and the function is activated. Bluetooth® Switch on the ignition. Please switch on Bluetooth. Switch on the Bluetooth® function » page 12. No Bluetooth devices paired. Pair the mobile phone with the handsfree system » page 25. Explanation of graphic A To connect a mobile phone with the hands-free system, the two devices must be paired » page 25.
Connecting mobile phone with hands-free system Possible symbols in the list of found or paired devices Symbol Description Introductory information The hands-free system is indicated as SKODA BT wxyz in the Bluetooth® device to be paired. wxyz is replaced with the last four symbols of the VIN code of your vehicle. You can change the name of the hands-free system » page 12.
The system displays a list of found Bluetooth® devices. (If you do not press the button Results , the system displays the list after 25 seconds). Connecting to another paired mobile phone › In the PHONE main menu, press the function key B » Fig. 16 on page 24. › Select the paired mobile phone to be connected with the hands-free system. › Confirm the connection by pressing Replace . › Select the mobile phone that you want to pair. › Confirm the pairing request on the mobile phone.
Downloading and updating the phone book Upon the first connection of the mobile phone with the hands-free system, the system begins to download the phone book from the phone and from the SIM card1) into the memory of the control unit. Direct entry of a phone number Fig. 17 Direct entry of a phone number If the phonebook downloaded from the mobile phone contains more than 2 000 contacts, loading is stopped and the message Contacts not completely imported appears on the screen.
■ User profile - User profile settings1) ■ Manage favourites - Assign function Call lists Fig. 18 Call lists › Press the button PHONE → . The system displays a call list » Fig. 18. B C D Press the function key for a desired contact or telephone number to start dialling. Settings in telephone mode › Press the button PHONE → .
Incoming call During the ring tone of the incoming call, the screen displays the phone number or contact name. You can select the following functions: ■ - Answer the incoming call ■ - Mute the ring tone ■ - Reject the incoming call ■ Caller picture - Display caller details Current call During a current call, the screen displays the phone number or contact name and the call duration.
Button 2 Action Press briefly Current call Operation ■ ■ ■ ■ ■ Switch on voice control, cancel acoustic message, new voice command possible Press briefly twice Switching off voice control Press button for a long period of Switching off voice control time Button 3 Action Press briefly ■ Conference ■ ■ ■ ■ ■ ■ ■ Operation Accept call, end call, entry in the main menu of the telephone, call list, call the dialled contact Press button for a long period of Reject call, redial last call (redial) time Cont
Navigation Navigation Preface to navigation Preface First and foremost, pay attention to the safety instructions » page 3. Select and confirm all functions as described at the beginning of this manual » page 5. The unit uses the GPS (Global Positioning System) satellite system for navigation. The satellite signal allows you to determine your current vehicle position. WARNING (Continued) The driving recommendations provided may vary from current situations, e.g.
For more information on updating the data, please visit the ŠKODA website or contact a ŠKODA Partner. The version of the navigation data for maps can be found in the navigation settings NAV → → Version information . Card has been damaged or lost If the SD memory card with the navigation data has been damaged or lost, a new card can be obtained from ŠKODA original accessories. The navigation data can be loaded only on the original card.
Main menu Fig. 21 Main menu navigation mode › Press NAV . The last opened menu opens in navigation mode. If a menu other than the main menu » Fig. 22 on page 35 is opened, the main menu can be opened by pressing NAV again.
■ Navigation settings ■ ■ Main menu ■ ■ First and foremost, pay attention to the safety instructions » page 3. Select and confirm all functions as described at the beginning of this manual » page 5.
■ Demo mode - Switch on/off guidance in demo mode ■ Define demo mode starting point - Enter the starting point ■ Define home address - Display/enter/edit the home address ■ Current position - Set the home address to the current position ■ Address - Enter a new address » page 36.
Status bar » page 34 POI icons » page 44 D E Displays the automatic map scale Setting the map display › In the main menu of navigation mode, press The following items are displayed: - 2D - current vehicle position in the 2D map display - 3D - current vehicle position in the 3D map display - Destination display in the map (appears after route calculation) - Route to the destination (appears after route calculation) Day/Night - Changes the map display, colour or in gray-scale Split scre
The following function keys are displayed: Current position - Current vehicle position; Address - Address » page 40. Audio › › Fig. 23 Split screen: Audio Description of the adjustment or deletion process of the home address » page 35. Split screen Menus in the split screen The split screen displays additional information, depending on the context of the selected menu.
Traffic Compass Fig. 26 Split screen: Traffic signs Fig. 24 Split screen: Compass The Compass split screen displays the current vehicle position in relation to the compass. The Traffic split screen displays traffic signs. Up to three traffic signs and three additional traffic signs can be displayed. If the message No traffic sign available are displayed in the split screen, the front camera did not recognise any traffic sign or you are outside the range of the navigation data.
Displayed information ■ - Longitude1) ■ - Latitude1 ) ■ - Elevation2) ■ Satellites: - Number of received/available satellites 1) 2) To display the longitude and latitude, the signal from at least three satellites must be received. To display the elevation, the signal of at least five satellites must be received.
Address Navigation Fig. 29 Destination entry by address Entering a new destination Destination entry options Fig. 28 Destination entry options › In the main menu of navigation mode, press → Options → → New dest./stopover Address or › In the main menu of navigation mode, press → Options → Address or Select the menu with the option to enter a destination » Fig. 28.
Entry on the map is also used for entering the search area for POIs » page 42. When entering the street, instead of a street name, it is possible to select the centre of the entered city by touching Centre . Then it is no longer necessary to enter the house number or junction. › In the main menu of navigation mode, press Entering a house number or a junction allows a more specific destination guidance. The crosshairs indicate the position of the pre-filled address » Fig. 29 on page 40.
› In the main menu of navigation mode, press → Dests. and contacts → Select the source and confirm the menu itemImport all vCards of this folder to start importing the data stored in vCard format into the unit memory. or › In the main menu of navigation mode, press → Last destinations → .
Upon confirmation of a menu item, the destination details and the following items are displayed: Search area for POIs - Start a phone call1) (If a phone is connected via Bluetooth® and the destination has been entered including the contact telephone number) Start - Start route calculation » page 45 Store - Store the address in the destination memory ■ Dial number Fig.
Searching near the current position, near the destination, near the stopover destination and along the route Searching near the entered address or near the entered map Fig. 34 Search area for POIs Fig. 35 POI search: near the entered address entered/near the entered map point The figure applies to the following search area options 1 » Fig. 32 on page 42.
- Displays a list of all destinations in the search area, with the nearest POI listed at the top Categories (alphabetical) - Displays all POI categories in alphabetical order ■ Select all ■ Car and travel Symbol Description Bus stops Natural gas stations Motorway intersections Hotels and motels Airports Rest stops Car rental SKODA service Tourist Information Symbol Description Electronics Shopping centres Clothing Restaurants Symbol Description Cafes
If Demo mode is switched on » page 34, a prompt appears asking whether you want the guidance to start in demo mode or normal mode. Graphical navigation instructions If an alternative route option is set, function keys are displayed, following the calculation, for the route types with information on the route length and the expected travelling time. The graphical navigation instructions are displayed: › in the information display » page 32; › in the split screen of the unit screen.
- Display information about the destination and the calculated route (setup of information displayed » page 34) ■ Store destination - Stores the destination on the input screen » page 7 ■ Route list - Displays the list of route sections Congestion ahead - When you learned of a traffic problem (e.g. congestion), you can enter this traffic problem manually. After entering, the unit recalculates and provides an alternative route.
Destination details Destination management Fig. 38 Destination details Stopover Fig. 37 Stopover screen The following information and functions are displayed in the destination details: › preview map with indication of the destination by means of the symbol ; › detailed destination information; › - reduce preview map display; › - enlarge preview map display. It is possible to add a stopover to the route during route guidance. Route guidance then occurs first to the stopover.
› by touching at the menu item in the list of found POIs; › by touching the POI symbol on the map. - Start a phone call1) (If a phone is connected via Bluetooth® and the destination has been entered including the contact telephone number) Start - Start route calculation » page 45 Store - Store the address in the destination memory ■ Dial number ■ ■ Home address The menu is displayed after the home address has been entered.
Dynamic route switched off You are not alerted to received traffic disruptions along your route and are guided through the traffic disruption by the radio navigation system. The traffic reports are updated automatically in the unit and displayed by pressing the button TRAFFIC . Traffic programme (TRAFFIC) Traffic (TMC) If one of the announced traffic disruptions lies along your route, you can also switch on the dynamic route guidance during the current route guidance or block the route manually » page 46.
Vehicle data Setting vehicle systems Setting vehicle systems Main menu First and foremost, pay attention to the safety instructions » page 3. Select and confirm all functions as described at the beginning of this manual » page 5. The vehicle systems setup functions can only be used when the ignition is switched on. Fig. 39 Driving data/vehicle condition › Press the button Call up the main menu › Press the button / .
- Display up to three consumers which have the largest share of fuel consumption and displays the fuel consumption to run all convenience consumers » Vehicle Owner's Manual, chapter Driving and environment Vehicle status - Displays vehicle status » Fig.
■ Units - Settings for units of measurement » page 11 ■ Service - Service interval display, VIN » page 55 ■ Factory settings - Reset to factory settings » page 55 ■ ■ ESC system › Press the button ■ Activated ■ ASR off - → Tyres › Press the button ■ ■ ■ ■ → ■ Tyres .
F G H ■ ■ Travel mode: - Travel mode on/off ■ R-hand traffic - For right-hand traffic ■ L-hand traffic - For left-hand traffic An obstacle appearing in the collision zone is shown as a red-coloured segment Do not proceed! An area without detected obstacles is shown as a transparent segment An obstacle in the sensor range which lies outside of the collision area is shown by the white segment ■ ParkPilot - Settings for the parking aid - Activate/deactivate the compact parking aid display (when driving for
■ Central locking - Settings for opening and closing of doors Door unlocking: - Set the door unlocking feature ■ All doors - All doors ■ Single door - Single door ■ Vehicle side - Doors on the driver's side ■ Automatic locking - Activate/deactivate automatic locking when starting off ■ Acoustic confirmation - Activate/deactivate acoustic signals when locking/unlocking the vehicle with an anti-theft alarm system ■ ■ ■ ■ Seats › Press the button ■ → Multifunction display ■ ■ ■ ■ ■ ■ ■ → Multifu
Other functions Introductory information First and foremost, pay attention to the safety instructions » page 3. Select and confirm all functions as described at the beginning of this manual » page 5. The following functions can only be used when the ignition is switched on. Selecting driving mode Fig.
Climatronic settings Fig. 43 Climatronic: Main menu If Climatronic is switched on, the system displays the desired temperature for the driver's side and front passenger side» Fig. 43. Depending on the desired temperature, the airflow from the air outlet vents is shown in blue (temperature under 21.5 °C) or red (temperature above 22 °C). When using Climatronic in automatic mode, AUTO is shown on the screen. Call up the main menu › Press the button SETUP on the Climatronic control panel.
Index A Address Advanced setup AM Anti-theft protection Audio Information display Media Radio Automatic station finding AUX Auxiliary heater and ventilation 40 34 15 3 15 15 19 15 15 22 52 B Bluetooth Connecting an external audio source Connecting your phone with hands-free system Profiles Settings Switch on/off Visibility 23 25 25 12 12 12 C CD Climatronic Component protection Control of the unit Custom destination 20 57 3 6 42 D DAB Operation 58 Index 17 17 Data Convenience consumers Trip Vehicl
Unit menus Unit setup Manage memory Map Display Introductory information Lane guidance Main menu Operation Media Information display MEDIA IN Memory card mode Radio Mode Setting vehicle systems Unit setup More keypad languages Multifunction steering wheel Mute My destinations Menu 9 10 35 35 35, 36 35 47 35 36 19 19 23 21 15 51 10 11 29, 32 5 41 N Navigation Advanced setup Destination entry Display Fuel options Graphical navigation instructions Home address Main menu Manage memory Map Map operation Naviga
Setting vehicle systems Auxiliary heater and ventilation Climatronic Driver assistance ESC system Lights Main menu Mirrors and wipers Multifunction display Opening/closing Parking and manoeuvering Restore factory settings Seats Service Tyres Setup Sound Unit Sound Split screen Audio Compass Geographical coordinates GPS Manoeuvre Menus Navigation instructions Switching on/off Traffic Traffic signs Status line Stopover Storing radio stations Switching the unit off Switching the unit on 52 57 53 53 54 51 54 5
ŠKODA AUTO a.s. pursues a policy of constant development of Infotainment radios and navigation systems. We trust that you will understand that changes to models in terms of shape and engineering may be introduced at any time. The details of appearance, dimensions and functions of the Infotainment radios and navigation systems were correct at the time of publication. It is therefore not possible for legal claims to be made based on the data, illustrations and descriptions contained in this Owner's Manual.
www.skoda-auto.com Amundsen Infotainment anglicky 11.2012 S00.5614.04.
