User Manual

ManualsBrandsSiemens ManualsHouseholdSEH62.1

CE2N5243en

2017-11-21

Building Technologies

243

Digital Time Switch

SEH62.1

Digital time switch used to switch plant on and off, or for the control

of setback periods at night or at weekends.

∂ Integrated countdown timer

∂ Suitable for mounting on DIN rail

∂ Simple programming with large and easy - to-understand LCD

∂ Manual on/off control

∂ Quick Daylight Saving (DS) adjustment

∂ Backup of 72 hours

Functions

The microprocessor automatically stores the programmed times in chronological order.

The time switch operates in one of 4 modes:

∂ Manual continuously on

∂ Manual continuously off

∂ Adjustable count down timer on, or

∂ Automatic operation via the time program

A switch with momentary contact closure across M-D1 activates the countdown timer.

The power supply is buffered by a memory backup capacitor. In the event of a power

failure, the time switch will continue to run, with the program retained, for 72 hours.

However, the relay will assume (or remain in) the normal position.

Summary of content (5 pages)

PAGE 1
5 Digital Time Switch 243 SEH62.1 Digital time switch used to switch plant on and off, or for the control of setback periods at night or at weekends. ∂ Integrated countdown timer ∂ Suitable for mounting on DIN rail ∂ Simple programming with large and easy - to-understand LCD ∂ Manual on/off control ∂ Quick Daylight Saving (DS) adjustment ∂ Backup of 72 hours Functions The microprocessor automatically stores the programmed times in chronological order.
PAGE 2
Programming The SEH62.1 allows up to 8 programmed on/off periods. Each of these periods can be assigned to a single day or blocks of days as displayed on screen. Status line LCD ON OFF AUTO MANUAL Program selection Prg 1 2 3 4 5 6 7 8 Weekday Su Mo Tu We Th Fr Sa Time/setup title line am pm Countdown enable 5243Z01en Operating buttons The controller has 3 operating buttons for the following functions: SEL The SEL button is used to enter or save the settings.
PAGE 3
5243Z02 The SEH62.1 is for indoor use and must have all terminals well protected by a plastic cover or in a panel/enclosure. A B C D Electrical installation The SEH62.1 is designed for AC 230 V supply voltage. There must be a minimum of 8 mm clearance between the terminals and the panel/enclosures in order to avoid electric shock. Under no circumstances should the front cover of the time switch be removed. All local safety regulations must be observed.
PAGE 4
Technical data General data Power supply Operating voltage Frequency Power consumption AC 230 V –15...+15 % 50/60 Hz 3.0 VA No internal fuse Environmental conditions Norms and standards External preliminary protection with max. C 10 A circuit breaker in the supply line required under all circumstances. Operation to IEC 60721-3-3 Climatic conditions class 3 K5 Temperature 0...+50 °C Humidity <95 % r.
PAGE 5
Internal diagram N L, N M, D1 Q… Q12 Q14 5243G01 Q11 L D1 M Input AC 230 V Digital input (momentary contact closure) Digital output, various voltages permissible (see Technical data, Signal output Q) Dimensions 56 48 30 106 89 78,8 60 5243M01 Issued by Siemens Switzerland Ltd. Building Technologies Division International Headquarters Gubelstrasse 22 CH-6300 Zug Tel. +41 58-724 24 24 www.siemens.