Instructions

Mounting and connecting
3.4 Switching on and testing the HMI device
Basic Panels 2nd Generation
36 Operating Instructions, 03/2014, A5E33293231-AA
Note
Excessive rated load on port
A USB device with too high a power load may possibly cause functional problems.
Observe the values for the maximum load of the USB interface. You can find the values in
the chapter "USB (Page 99)".
Note
USB memory stick is not detected.
Depending on the USB memory stick you use, it may happen that the operating system does
not detect the USB memory stick. In this case, use a different USB stick.
3.4
Switching on and testing the HMI device
Switching on the HMI device
Switching on the power supply.
The screen lights up shortly after power
is switched on.
If the HMI device fails to start, you have
probably crossed the cables on the
power supply terminal. Check the
connected cables and change their
connection.