ULX Wireless System Shure ULX Wireless ULX sans fil de Shure Sistema inalámbrico ULX de Shure Sistema ULX Sem Fio da Shure ©2011 Shure Incorporated 27A15788 (Rev.
Shure ULX Wireless ULX System Components All systems include either a ULXS4 Standard Diversity Receiver or ULXP4 Professional Diversity Receiver. Bodypack systems include a choice of lavalier, headworn, or instrument microphones. Handheld systems include a choice of interchangeable microphone heads. WH30, WCM16, WBH53/54 SM58, SM86, SM87A, Beta 58, Beta 87C WB98H/C WL93, WL183/184/185, WL50/51 Guitar systems include a 1/4” to mini 4-pin cable. ULXP4 receivers include rack-mounting hardware.
Antenna Combiners and Accessories The supplied antennas can be connected directly to the BNC-type ANTENNA connectors. However, optional antenna mounting accessories from Shure can improve reception and reduce rack clutter. Use the following guidelines: • Antennas and receivers must be from the same band. • Mount antennas more than 40 cm (16 inches) apart. • Use Shure UA825 or UA850 low-loss coaxial antenna cable (or any 50 ohm, low-loss cable such as RG-8U). Visit www.shure.
Power ULXP4, ULXS4 Power switch Power Connector Connect using the supplied AC adapter or certified 14–18 Vdc (550 mA) replacement supply. Batteries ULX1, ULX2 ULX1 Power/Mute Switch • Turn transmitter off to mute the microphone or conserve battery power. • Use the lock feature to avoid accidental muting of the microphone during a performance. ULX2 Power Indicator (BAT) Green: ready Red: battery power low Battery Life Use only 9V alkaline or lithium batteries.
Single System Changing Group and Channel Automatic Frequency Scan Change Channel If you encounter wireless interference, perform a channel scan on the receiver and use the selected channel. You usually do not need to change the group. Channel Scan If you encounter wireless interference, set the receiver and transmitter to a different channel or group. ULXP4, ULXS4 ULX1, ULX2 This feature scans for an open channel in the selected group.
Wireless Indicators RF Indicator ULXP4 Frequency Display ULXS4 Indicates wireless activity over the selected channel. Note: When the antenna and battery indicators are illuminated, the RF indicator shows signal strength from the transmitter. Otherwise, it is showing interference from another source. Select a different channel. ULXS4 Squelch TV ULXP4, ULXS4 Antenna Indicator ULXP4 ULXP4 This indicator shows which antenna is receiving the strongest signal from the transmitter.
Transmitter Gain For best audio quality, adjust transmitter gain so only the green and yellow TX AUDIO LEDs flicker. (Occasional illumination of the red LED is okay.) Green=nominal Yellow=peak Red=overload Locking the Receiver (ULXP4 Only) This feature prevents accidental setting changes. ULXP4 lock volume lock frequency ULX1 ULX2 Unlocking Hold the SET button while turning the control wheel left, right, left. ULXP4 Note: If LEVEL flashes on the LCD, decrease the LEVEL control to continue.
Troubleshooting Tips for Improving System Performance No power: Check battery and power supply connections and voltage. Check the power switch on the transmitter. If you encounter wireless interference or drop outs, try the following: The LCD displays “E0 00” or similar code: Exit master list mode by holding the SET button for ten seconds. Can’t turn off or change settings on the transmitter or receiver: The interface is locked. See the section on locking the interface.
SPECIFICATIONS RF Carrier Range Working Range ULX2 470,000–865,000 MHz Gain Adjustment Range varies by region Dimensions 20 dB SM58: 100 m (300 ft) typical Note: Actual range depends on RF signal absorption, reflection and interference.
CERTIFICATION ULX1, ULX2, ULXS4, ULXP4 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Meets requirements of EMC standards EN 300 422 Parts 1 and 2 and EN 301 489 Parts 1 and 9. LICENSING INFORMATION Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements.
Accessories and Parts Furnished Accessories Microphone Stand Adapter (ULX2) Grip/Switch Cover (ULX2) Zipper Bag (ULX1) Zipper Bag (ULX2) Screwdriver (ULX2) Optional Accessories Replacement Parts WA371 WA555 95A2313 95B2313 80A498 Passive Antenna Splitter/Combiner Kit UA221 UHF Line Amplifier UA830WB UHF Powered Directional Antenna UA870WB UHF Antenna Power Distribution Amplifier (U.S.A.
ULX FREQUENCIES FOR EUROPEAN COUNTRIES ULX-G3E 470 - 506 MHz, max. 30 mW ULX R4 784–820 MHz max.
ULX SYSTEM COMPATIBILITY GUIDE FOR FREQUENCY BAND G3E (470–506 MHz) Channel Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Full Range Full Range Full Range France France France France max. # of compatible frequencies max. # of compatible frequencies max. # of compatible frequencies preferred: preferred: preferred: preferred: (option 1) (option 2) (option 3) User Group A User Group A User Group A User Group B 470.775 471.525 473.350 474.875 476.150 476.850 477.775 480.000 481.
ULX SYSTEM COMPATIBILITY GUIDE FOR FREQUENCY BAND K2E (606-642 MHz) Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Group 7 Group 8 Group 9 Full Range Full Range Full Range Full Range Full Range Full Range U.K. preferred: U.K. preferred: U.K. preferred: max. # of max. # of max. # of max. # of max. # of max. # of TV ch. 38 TV ch. 38 TV ch.
United States, Canada, Latin America, Caribbean: Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone: 847-600-2000 Fax: 847-600-1212 (USA) Fax: 847-600-6446 Email: info@shure.com www.shure.com ©2011 Shure Incorporated Europe, Middle East, Africa: Shure Europe GmbH Jakob-Dieffenbacher-Str. 12, 75031 Eppingen, Germany Phone: 49-7262-92490 Fax: 49-7262-9249114 Email: info@shure.
