2. Mapping and Cleaning/2.5 Mopping System Get Water Inlet Cover on Es Add Water Hearing Click Means Successful Installation 1. To prolong the service life of the reservoir, it is recommended to use purified water or softened water for the mopping system. 2. If you need to clean the carpet, please uninstall the Mopping Pad Plates first. 3. Empty the reservoir after Robot finishes mopping.
3. Maintenance/3.
3. Maintenance/3.2 Dust Bin and Filters Rinse Dust Bin and Filters with Running Water Dry out Dust Bin and Sponge Filter 1. Please rinse the Filters with water as shown above. 2. Do not use finger or brush to clean the Filters. 3. Ba sure to dry out the Filters for at least 24 hours after wash.
3. Maintenance/3.
3. Maintenance/3.5 Dual Elastic Edge Brushes, Driving Wheels and Universal Wheel Remove Dual Elastic Edge Brushes Clean Driving Wheels ra Clean Dual Elastic Edge Brushes Clean Universal Wheel Before cleaning the Robot,turn the Robot OFF and unplug the Charging Station.
3. Maintenance/3.
4. Indicator Light Robot will tell you something is wrong with an indicator light and voice report. More detailed support is available through the edify App and online website. Indicator Light Scenario AUTO Button glows a solid WHITE. The Robot is cleaning. The Robot is paused while cleaning. AUTO Button flashes WHITE. The Robot is charging. The Robot is starting. The Robt is relocating. AUTO Button glows a solid RED. The Robot has low battery. AUTO Button flashes RED. The Robot has a problem.
5. Troubleshooting/5.1 Troubleshooting No. ‘Mel function Possible Causes Solutions Robot is not able to connect to the home WI-Fi network. Incorrect home WI-Fi username or password entered. Enter the correct home WI-Fi username and password. Robot is not within range of your home WI-Fi signal. Make sure Robot is within range of your home WI-Fi signal. Network setup started before Robot was ready. Turn ON Power Switch. Press the RESET Button for 3 seconds.
No. Malfunction Possible Ca van Solutions The Charging Station is not correctly placed. Refer to section 2.2 to correctly place the Charging The Charging Station is disconnected or | Please check if the Charging Station is connected to moved. power. Do not move the Charging Station manually. Re 3 | aoe ™ 2% | The Charging Station is on the carpet. Place the Charging Station on hard floors. Robot is paused for more than &0 minutes. Avoid pausing Robot for over 60 minutes.
Mai function Possible Causes Solutions The water is not coming out The water inlet Filter on the bottom of Reservoir is clogged. Unscrew the water inlet on the bottom of Reservoir and clean the Filter. 7 | of the Reservoir when Robot is | The Reservoir runs out of water. Add water into the Reservoir. mopping. The water outlets on the bottom of Robot are dogged. Check the water outlets on the bottom and clean. The reservoir drops out of | .
5. Troubleshooting/5.2 WI-Fi Connection Before WI-Fl setup, make sure Robot, mobile phone, snd WIFI network meet the following requirements. Robot and Mobile Phone Requirements © Robot is fully charged and the power switch of Robot is turned ON. © WiFi status light slowly flashes. » Turn off mobile phone's cellular data {you can turn it back on after setup). WI-Fi Network Requirements * You are using a 2.4GHz or 2.4/5 GHz mixed network. * Your router supports and Iva protocol.
6. Product Specifications Model YDTX11 Rated Input 20V=— 1A Ming Station” cH2125 chancy Rated Input ot PT 1101 aie So site Osa Charging Rated Output 20V==1A Rated Output 20V 1A 1. Output power of the WI-Fi module is less than 100mW. 2. Technical and design specifications may be changed for continuous product improvement. 3.* CH2123 is an Self-Empty Station sold separately that automatically empties your Robt's dustbin. 4, Charging Station.
INSTRUCTIONS IMPORTANTES DE SÉCURITÉ LISEZ TOUTES LES INSTRUCTIONS AVANT D'UTILISER CET APPAREIL. CONSERVER CES INSTRUCTIONS Pour une utilisation domestique seulement Lors de l'utilisation dun appareil électrique, les précautions de base suivantes doivent &tre suivies. AVERTISSEMENT : Lire tous les avertissements et instructions de sécurité. Ne pas suivre les avertissements et les instructions peut entraîner une décharge électrique, un incendie ou des blessures graves. 1.
°C/104 °F. Les vêtements amples, les cheveux, les doigts et toutes les autres parties du corps doivent &tre tenus a |'écart de toute ouverture et de toute pièce mobile. N'utilisez pas |’appareil dans une pièce oli dort un nourrisson ou un enfant. Pour une utilisation intérieure SEULEMENT. N'utilisez pas |’appareil a I'extérieur ou & des fins commerciales ou industrielles. N'utilisez pas |'appareil sur une surface humide ou mouillée.
