http://www.idea-a.com.
http://www.idea-a.com.cn 1.
http://www.idea ://www.idea-a.com.cn 2. The characteristics ofproduct of Out of box No need for installation, debugging and training of engineering personnel. After receiving the product unpack, add pure water or clean water, the user can start to use with one key. Automatically mapping/Autonomous Autonomous Path Planning After starting up, the robot will automatically explore the surrounding environment to generate a map and plan the bow path or the shortest path (selected by the user).
http://www.idea-a.com.cn Voice broadcast/support mobile phone control The robot can be customized to repeat the broadcast (voice broadcast needs to be customized).The status information of the robot can be displayed in real time on the mobile phone, phone, and it can also be controlled remotely by the phone (APP needs to be installed, and the robot needs to be in WiFi environment).
http://www.idea-a.com.cn 3. 装箱清单 Note: the company reserves the right to change the products and accessories. This list is forreference only 4. How the product works The ultrasonic air spray module USES the principle of producing 1.7 million high-frequency oscillations per second to spray water into 1~5-micron ultramicro particles. Through the pneumatic device, the liquid fog is diffused in the air to achieve the purpose of covering a certain area with moisture.
http://www.idea-a.com.cn 3. Place four-way sprinkler head to complete the overall installation ： Robot charging instruction 1. Connect the charging stand to the ac power supply of 220V ~ 50Hz, and the charging stand light will be on. 2.
http://www.idea-a.com.cn Instructions on App installation and WIFI pairing: 1. Search for "doodle intelligence" in the App Store or Android App stores or scan the qr code below to download and install. 2. After touching the recharging button gently and pressing the recharging button for 5 seconds, the robot will start the WiFi connection mode. Please operate the phone to connect to WiFi (at the same time, make sure that the phone is connected to the WiFi network of 2.
http://www.idea ://www.idea-a.com.cn 5. Select the mode of "manual addition" or "automatic discovery". When manually adding, select "small appliances" from "category" on the left list page, and then select "intelligent humidifying robot”. 6. When using auto discovery, start searching for robots when you select "auto discovery" at the top of the page 7. ； After completion of pairing, the system prompts "completion of pairing".
http://www.idea-a.com.cn 2. Turn on the power switch and spray switch of the robot, adjust the amount of fog, ； and gently touch the spray/pause button to start the planning of spray work Planning the spray 3. 4. Planning the spray Long press the spray/pause button for 5 seconds and start drawing along the edge.
http://www.idea-a.com.cn APP of the robot ： function declaration 1. Off key function: this product has the power saving function of turning off the LCD screen, gently touch the off key to turn off the LCD screen, and repeat the operation to turn on the LCD screen. 2. Timing key function: this product has the function of setting up a timer to shut down and enter the standby state. The function can be set up for 1~12 hours after automatic shutdown for standby state 3.
http://www.idea-a.com.
http://www.idea-a.com.cn 7. Maintenance 1. When cleaning, please be sure to move the humidified robot chassis to prevent water 2. If there is scale on the surface of the water tank or atomizer, pour the dissolved scale remover, citric acid, or white vinegar, then wipe with a cotton swab or brush and rinse with water 3. . Rinse the soft cloth in warm water of less than 40 degrees Celsius and wipe away the stains on the surface.
http://www.idea-a.com.cn properly for future reference. 2. Only use the original rechargeable battery and charging stand specially equipped by the manufacturer. Non-rechargeable batteries are strictly prohibited. 3. When using the machine for the first time, please make sure to charge the machine continuously for more than 4 hours. ℃ 4. Please use at normal room temperature (-10~40 5. When using the robot, please keep away from the heat source. 6.
http://www.idea-a.com.cn 10. Common faults and solutions NO. 1 2 3 4 5 6 10 11 fault condition possible cause solution Activate the battery, manually place the robot on the charging stand, charge it for three minutes The robot is in a deep and move it out.
http://www.idea-a.com.
http://www.idea-a.com.cn 11. After-sales instructions 。 1. Please fill in this form and keep it properly, otherwise the warranty will be invalid 2. Please show this warranty and retailer's certificate when repairing within the warranty period 3. Warranty period: valid for one year from the date of purchase of invoice 4. Warranty limitations: the warranty will be invalidated under the following circumstances 5. ： Customer incorrect maintenance.
http://www.idea-a.com.cn 12. Company information www.idea www.ideaidea-a.com.cn .com.cn 深圳壹智云科技有限公司（ 深圳壹智云科技有限公司（SHENZHEN IDEAIDEA-A TECHNOLOGY CO., LTD.） LTD.） Address： ddress：Building 1, zone A, guangxing yuan bao 'an Internet industry base, baoyuan road, baoan district, Shenzhen Zip code： code：518102 518102 telephone elephone： ephone：07550755-27210919 ©Idea-A Technologies，Inc.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
